1. Product Features
- High Brightness: Utilizes imported LED chips, providing several times higher brightness than traditional halogen lamps. Features 15-core CSP4575 chips.
- Energy Efficient & Eco-friendly: Significantly lower power consumption than traditional halogen lamps, leading to a much longer lifespan.
- Real High Power: 400W/set for H7, H11, H1, 9005, 9006, 9012 models, and 220W/set for H4 models.
- Optimal Beam Pattern: Designed for good light concentration, eliminating stray or blinding light, ensuring driving safety.
- Advanced Thermal Management: Incorporates a multi-layer cooling system with a copper substrate and 9 copper heat pipes for rapid heat dissipation. Optimized cooling fins and a 7-blade high-speed silent fan maintain ideal operating temperatures.
- Wide Compatibility: Includes an external power box with built-in decoder technology, ensuring compatibility with 99% of vehicle models and preventing flickering or dashboard error codes.
- All-Weather Durability: Engineered with IP68 waterproof, dustproof, and freeze-proof sealing for reliable performance in various extreme weather conditions.
- Plug and Play: Compatible with the original vehicle circuit, requiring no circuit modifications for most models.
2. Safety Information
Please read and understand all safety instructions before installation and use to prevent injury or damage.
- Always turn off the vehicle's power and allow the headlights to cool down before handling.
- Ensure the vehicle is in park or securely in gear, with the ignition turned off and keys removed.
- Be cautious to avoid burns, especially when turning the vehicle's lighting on or off.
- Do not touch the lamp beads with your fingers to prevent staining or damage.
- Avoid pressing the cooling fan to prevent damage.
- Pay close attention to positive and negative connections. Thoroughly examine all contact points, ports, and wires, as faulty connections can lead to lighting problems.
- Ensure the end of the bulb does not contact the interior light shield of the headlight when adjusting. The wires of the lights should always face downwards.
- It is recommended to install a dust cover to protect the headlights and extend their service life.
3. Installation Guide
This section provides general installation steps. Specific diagrams are provided for different bulb types.
General Installation Steps:
- Turn off the vehicle power and allow the headlights to cool down.
- Open the engine compartment.
- Locate the rear cover of the headlights, turn it counter-clockwise, and remove the original car light bulb.
- Insert the LED light into the original light socket (pay attention to positive and negative directions), ensuring the buckle is securely in place.
- After powering on, check if the lighting is normal and adjust the lens angle to meet the regulatory illumination range (low beam tangent level).
Specific Installation for Type H11 / 9005 / 9006 / 9012 / 880:
- Open the front cover of the vehicle and prepare to install the LED headlights.
- Find the original car bulb. Unscrew it.
- Remove the original car bulb.
- Place the LED bulb in the original position.
- Twist the LED bulb until it fits and secures.
- Connect the power supply and test if it works properly.
Specific Installation for Type H1 / H3 / H4 / H7 / H13 / 9004 / 9007:
- Open the front cover of the vehicle and prepare to install the LED headlights.
- Find the original bulb location.
- Open the spring clip, take out the original bulb and chuck.
- Install on the new chuck.
- Press the spring clip and make it firm.
- Aim at the chuck slot, put the bulb into the chuck.
- Notice the chuck slot, make it match with the convex position.
- Rotate slightly and make the bayonet fixed.
- Connect the power supply and test if it works properly.
4. Operating Instructions
The Infitary LED Headlights are designed to provide superior illumination for safe driving.
- Low Beam: Provides a concentrated tangent line with wide irradiation, ideal for regular driving conditions.
- High Beam: Offers a longer range and effective indication of the road ahead, suitable for unlit roads or highways.
- Beam Adjustment: After installation, ensure the lighting is normal and adjust the lens angle to meet the regulatory illumination range (low beam tangent level) for optimal performance.
5. Maintenance
- Avoid Prolonged Lighting: If continuous lighting exceeds 4 hours, intermittent shutdown is recommended to prolong lifespan.
- Cooling Fan Inspection: Check the cooling fan for dust accumulation every 6 months and clean if necessary to ensure efficient heat dissipation.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Headlight does not work after installation. | Incorrect plug orientation or loose connection. | Try reversing the plug 180° and reconnecting. Ensure all connections are secure. |
| Headlight flickers or shows error codes. | Different current requirements compared to halogen/xenon lamps; vehicle's voltage instability. | Install a pair of decoders to resolve current differences. Check if the vehicle voltage is stable at the appropriate standard voltage (12V or 24V). |
7. Specifications
| Attribute | Value |
|---|---|
| Brand Name | Infitary |
| Item Type | Other (LED Headlights) |
| Wattage | 400W/Pair (H7/H11/H1/9005/9006/9012), 220W/set (H4) |
| Lumen | 100000LM |
| Color Temperature | 6500K Cool White |
| Voltage | 12 V |
| Lamp Chips | 15 core CSP 4575 |
| Canbus | Ready for 99% vehicles |
| Waterproof | IP68 |
| Control | Intelligent Temperature Control |
| Application | For most cars (Kia, Hyundai, Audi, Opel, Ford, Volvo, Benz, BMW, etc.) |
| Origin | Mainland China |
| Certification | CE |
| Package Dimensions | 20cm (Length) x 15cm (Width) x 6cm (Height) |
| Package Weight | 0.5 kg |
8. User Tips
- Verify Socket Type: Always ensure you choose the correct socket type (e.g., H7, H11, H4) for your vehicle before ordering. If unsure, consult your vehicle's manual or contact support with your car information.
- Decoder Requirement: While compatible with most cars, some vehicles may require a decoder to prevent flickering or error codes due to the lower current draw of LED headlights compared to halogen/xenon.
- Beam Pattern Check: After installation, verify the beam pattern is correct and adjust if necessary to ensure optimal visibility and avoid dazzling other drivers.
9. Warranty & Support
This product comes with a 1-year warranty from the date of purchase.
For further assistance or detailed information, please refer to the official user manual PDF: