Tuya UZ-2D, UZ-6D

Contents

Tuya Zigbee 3.0 Door/Window Sensor Instruction Manual

1. Important Safety Information

  • Battery Safety: This device requires 2 x AAA (LR03-1.5V) alkaline batteries. Do not mix new and used batteries. Do not mix different types of batteries. Ensure correct polarity during installation.
  • Indoor Use Only: This product is not waterproof and is designed for indoor use only. Avoid exposure to moisture, direct sunlight, or extreme temperatures.
  • Zigbee Hub Required: This sensor operates on the Zigbee 3.0 protocol and requires a Tuya Zigbee Hub or Tuya Multi-mode Gateway to function. It cannot connect directly to Wi-Fi.
  • Keep Out of Reach of Children: Small parts and batteries can be a choking hazard.

2. Product Presentation

The Tuya Zigbee Door/Window Sensor is a smart device designed to detect the open/close status of doors, windows, drawers, and other objects. It provides instant notifications to your smartphone, enhancing home security and automation.

Tuya Zigbee Door/Window Sensor in a smart home setting

Figure 1: Tuya Zigbee Door/Window Sensor in a smart home environment.

Package Contents:

  • 1 x Main Sensor Body
  • 1 x Magnet (Small Body)
  • 1 x User Manual
  • 1 x Adhesive Tapes Kit (for installation)

Sensor Components:

  • Main Sensor: Contains the electronics, LED indicator, and reset button.
  • Magnet: The smaller component that triggers the sensor when separated from the main body.
  • LED Indicator: Shows device status (e.g., pairing mode).
  • Reset Button: Used for pairing and resetting the device.

3. Setup Guide

3.1 Battery Installation

  1. Slide downwards to open the back cover of the main sensor body.
  2. Insert 2 x AAA (LR03-1.5V) new alkaline batteries, ensuring the correct polarity (+/-) as indicated inside the compartment. The LED indicator will blink briefly.
  3. Push to close the back cover securely.

Note: Always use new alkaline batteries. Do not use carbon-zinc batteries or mix new and used batteries.

3.2 Network Connection (Pairing)

To connect your sensor to your smart home system, you will need a Tuya Zigbee Hub or Multi-mode Gateway.

  1. Ensure your Zigbee Hub is powered on and connected to your home network via the Tuya Smart or Smart Life app.
  2. Open the Tuya Smart or Smart Life app, navigate to your Zigbee Hub, and select 'Add sub-device' or 'Search for device'.
  3. On the sensor, ensure the LED indicator is flashing. If it's not flashing, press and hold the reset button (usually a small pinhole button) until the LED indicator starts flashing rapidly.
  4. The app will detect the sensor. Follow the on-screen prompts to add the device to your network.
  5. Once successfully added, the LED indicator will stop flashing, and the sensor will appear in your app's device list.
Zigbee Network Connection Diagram

Figure 2: Diagram showing Zigbee sensor connecting via a Zigbee Hub to Tuya Cloud services and the APP.

3.3 Mounting the Sensor

The sensor can be installed on doors, windows, drawers, mailboxes, garages, cabinets, or any other objects that open and close.

  1. Test Placement: Before final installation, temporarily place the sensor and magnet in your desired location to ensure they work properly and the gap is suitable.
  2. Clean Surface: Use a clean and dry towel to thoroughly clean the area where you intend to mount the sensor. This ensures optimal adhesion.
  3. Attach Main Sensor: Peel off the protective film from the adhesive tape on the back of the main sensor body and firmly press it onto the desired surface.
  4. Attach Magnet: Peel off the protective film from the adhesive tape on the back of the magnet. Mount the magnet directly adjacent to the main sensor body, ensuring the middle line of the magnet aligns with the marked area on the main sensor.
  5. Gap Requirement: The distance between the main sensor and the magnet must be less than 10mm when the door/window is closed for proper operation.

Note: The adhesive tapes are for one-time use only. Ensure the mounting surface is flat and stable.

Various installation scenarios for the door/window sensor

Figure 3: Examples of sensor installation on doors, windows, and cabinets.

4. Operating Instructions

4.1 Using the Tuya Smart / Smart Life App

Once the sensor is paired and installed, you can monitor and control it via the Tuya Smart or Smart Life app:

  • Instant Notifications: Receive real-time push notifications on your smartphone immediately when a door or window is opened or closed.
  • Alarm Alerts: The app will send an alarm alert when the sensor is triggered, indicating an open event.
  • Activity Records: View a history of open/close events and check the current battery level directly within the app.
  • Low Battery Reminders: The app will automatically notify you when the sensor's battery level is low, prompting you to change batteries.
  • Device Sharing: Share access to the sensor with family members by using the

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.