1. Safety Information
WARNING:
- Observe polarity (+/-) strictly. Reverse connection will damage the product.
- Install with proper fuse protection to prevent overcurrent, short circuit, and fire risk.
- Installation by a qualified electrician is recommended. Improper installation may cause vehicle failure or accident.
- This product is not E-marked / not for road legal use; use on public roads at your own risk.
- Keep out of reach of children.
This product complies with EU RoHS and REACH environmental directives, meets LVD 2014/35/EU low-voltage electrical regulations and EMC 2014/30/EU electromagnetic compatibility regulations, and is suitable for use in the EU market.
2. Product Overview
The FCCEMC LED Motorcycle Turn Signal Indicator Light is a versatile lighting solution designed to enhance visibility and safety for motorcycles. These sleek LED strips wrap around your motorcycle forks and function as both Daytime Running Lights (DRL) and amber flashing turn signals.
Key Features:
- New design ensures the wrap-around LED turn signal will stay in place.
- Functions as both DRL (Daytime Running Light) and turn signal.
- Dual color high brightness LED (White/Red for DRL, Yellow for turn signal).
- 120-degree viewing angle for wider visibility.
- Universal fit for most fork sizes (45-70mm).
- Industrial strength double-sided mounting tape on the back, along with a built-in zip tie for added strength.
3. Specifications
| Attribute | Value |
|---|---|
| Voltage | DC 12V |
| Light Color | Yellow (Turn Signal), White/Red (DRL) |
| Fitment | Universal (Any 45-70mm Fork) |
| Battery Included | No |
| High-concerned chemical | None |
| Origin | Mainland China |
Dimensions:
4. Installation Instructions
Before installation, please ensure that the vehicle power supply matches the product specifications (DC 12V).
- Prepare the Surface: Before affixing the light strip, thoroughly clean and dry the intended installation surface on your motorcycle forks. This ensures optimal adhesion of the mounting tape.
- Wiring Connection:
- Connect the red wire to the positive terminal (+).
- Connect the black wire to the negative terminal (-).
Important: Disconnect the vehicle's power supply during installation to avoid short circuits and electrical damage.
- Affix the Light Strip: Use the industrial strength double-sided mounting tape on the back of the LED strip to secure it to the motorcycle fork. For added strength and security, utilize the built-in zip tie.
For safety and stability, professional installation is strongly recommended.
5. Operation
Once correctly installed and wired, the LED lights will operate as follows:
- Daytime Running Light (DRL): When the motorcycle's ignition is on, the lights will illuminate in white (or red, depending on the specific model/wiring) to serve as DRLs, increasing your visibility to other road users.
- Turn Signal: When the turn signal is activated, the corresponding LED strip will flash in amber, clearly indicating your intended direction.
6. Maintenance and Care
- Cleaning: Regularly clean the LED strips with a soft, damp cloth to remove dirt and debris. Avoid using harsh chemicals or abrasive cleaners that could damage the light strip or its adhesive.
- Inspection: Periodically check the wiring connections for any signs of wear, corrosion, or looseness. Ensure the adhesive and zip ties are still securely holding the lights in place.
- Storage: If storing the motorcycle for an extended period, ensure the lights are clean and dry.
7. Troubleshooting
- Lights not illuminating:
- Check all wiring connections to ensure they are secure and correctly connected (red to positive, black to negative).
- Verify that the vehicle's power supply is active and providing 12V DC.
- Inspect the fuse in the circuit; replace if blown.
- Lights flickering or dim:
- Check for loose or corroded wiring connections.
- Ensure the vehicle's battery is adequately charged and providing stable power.
- Turn signal not flashing amber:
- Confirm the turn signal switch on your motorcycle is functioning correctly.
- Verify the wiring for the turn signal function is properly connected to the motorcycle's turn signal circuit.
8. User Tips
- Pre-fitment Check: Before permanently adhering the lights, temporarily connect them to the power source to ensure they function correctly and to visualize the best placement on your forks.
- Surface Preparation is Key: A clean, dry, and smooth surface is crucial for the adhesive tape to bond effectively and ensure the lights remain securely attached.
- Cable Management: Route the wiring carefully to avoid interference with moving parts, sharp edges, or heat sources. Use zip ties to secure excess wiring neatly.
- Visibility: While these lights enhance visibility, always use them in conjunction with your motorcycle's standard lighting system.
9. Warranty and Support
For warranty claims, technical support, or further assistance, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.
Manufacturer Information:
Guangzhou Zhengji Information Technology Co., Ltd
Address: Room 311, Building 2, Jiahe Creative Industry Park, Huangbian North Road, Baiyun District, Guangzhou City, Guangdong Province, China, 510440
E-mail: zj634216187@163.com
EU Authorized Representative:
Apex CE Specialists GmbH
Address: Grafenberger Allee 277, 40237 Dusseldorf, DE
E-mail: Info@apex-ce.com