1. Product Overview
The OSS W01 V2.0 Inductor Detector is a specialized tool designed for quick and precise fault checking of inductors on mobile phone motherboards. Utilizing electromagnetic induction, it provides ultra-fast microsecond response to identify normal or faulty inductors, making it an essential tool for electronic circuit board repair and DIY electronics.
This device is specifically engineered for testing inductors, which can be challenging to diagnose during repair processes. It is not a universal small board tester but focuses solely on inductance testing functionality.
2. Key Features
- Electromagnetic Induction: Detects inductors without direct contact.
- Ultra-fast Microsecond Response: Provides rapid detection for efficient troubleshooting.
- High Precision Detection: Accurately identifies inductor operating status.
- LED Indicators: Blue light for power connection, green light for normal inductor detection, red light for fault indication.
- Type-C Power Supply: Convenient and widely compatible power input.
- Easy Operation: Simple press-and-test mechanism.
- Compact Design: Portable and easy to handle for intricate repair tasks.
3. Specifications
| Attribute | Value |
|---|---|
| Brand Name | SUNSHINE (OSS TEAM) |
| Model Number | W01 V2.0 |
| Product Type | Inductance Tester / Inductance Detector |
| Material | Plastic |
| Power Supply | Type-C USB (cable not included) |
| Detection Method | Contact Inductive Sensing |
| Response Time | Microsecond-level |
| Application | Electronic Circuit Boards, DIY Electronics, Fault Point Detection (specifically mobile phone motherboards) |
| Dimensions (Device) | 75mm x 30mm x 2mm (approx.) |
| Package Dimensions | 103mm x 33mm x 12mm (approx.) |
| Weight | 20g (approx.) |
Note: The above data is manually measured and may have slight errors. Please refer to the actual product.
4. Package Contents
- 1 x OSS W01 V2.0 Inductor Detector Tool
- Note: A Type-C USB data cable for power supply is required but typically not included in the package.
5. Setup Instructions
- Connect the OSS W01 V2.0 Inductor Detector to a power source using a Type-C USB data cable. The blue power indicator light on the detector will illuminate, indicating it is powered on.
- Ensure the mobile phone motherboard or electronic circuit board you intend to test is also powered on. The detector requires the target circuit to be active for proper testing.
6. Operating Instructions
- With both the W01 detector and the target motherboard powered on, hold the detector comfortably.
- Press and hold the detection button on the W01 detector.
- Carefully bring the probe tip of the detector close to the inductor you wish to test on the motherboard.
- Important: Do not touch the inductor directly with the probe tip, as some inductors may not be insulated. Maintain a small gap for inductive sensing.
- Observe the Detection Indicator Light:
- If the light illuminates green, the inductor being tested is functioning normally.
- If the light does not illuminate (remains off), the inductor is faulty and may require repair or replacement.
- Release the detection button when finished testing the inductor.
7. Maintenance & Care
- Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Avoid exposing the device to extreme temperatures or moisture.
- Store the detector in a safe place to prevent physical damage to the probe tip or circuit board.
- Do not attempt to disassemble or modify the device, as this will void any potential warranty and may cause damage.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Detection indicator light does not illuminate, even on known good inductors. | 1. Detector not powered on.
2. Motherboard under test not powered on. 3. Probe tip touching inductor directly. 4. Faulty device. |
1. Ensure Type-C cable is connected and blue power light is on.
2. Verify the motherboard is powered on. 3. Ensure a small gap is maintained between the probe tip and the inductor. 4. Contact support if all other steps fail. |
| Device feels like it works randomly or is not practical. | Misunderstanding of operation or specific application. | Review operating instructions carefully. Remember it's for inductors only on powered mobile phone motherboards. |
| Broken tip or physical damage. | Improper handling or manufacturing defect. | Handle with care. If received damaged, contact seller for replacement. |
9. Precautions
- Power: Always ensure both the detector and the circuit board under test are powered on for accurate readings.
- Inductor Contact: Do not directly touch the inductor with the probe tip. Maintain a small gap for inductive sensing.
- Application: This tool is specifically designed for testing inductors on mobile phone motherboards. It may not be suitable or accurate for other components or circuit types.
- Handling: Handle the device with care to avoid damaging the delicate probe tip.
- Environment: Use in a clean, dry environment. Avoid liquids and excessive dust.
10. User Tips
- Double-Check Power: If the green indicator light doesn't come on, first confirm that both the W01 tester and the motherboard you are testing are properly powered.
- Maintain Distance: Remember to keep a slight distance between the probe and the inductor. Direct contact might interfere with the inductive sensing.
- Specific Use: This tool is highly specialized for inductors on phone motherboards. Do not expect it to test other components or types of circuits.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty claims.