Introduction
Thank you for choosing the Tuya Zigbee Door Window Sensor. This device allows you to real-time monitor the open/close status of your doors and windows, enhancing home security and preventing unauthorized entry. Please read this manual carefully before use and retain it for future reference.
Important Note: A Tuya Zigbee Hub is required for this sensor to function. The sensor does not work alone.
Product Features
- Instant Notification: Receive immediate push notifications on your phone when a door or window is opened or closed.
- Alarm Alert: The sensor sends an alarm to alert you of any open/close events.
- Alarm Recording: View open/close records and battery levels directly in the app.
- Device Share: Share sensor access with family members via the "Home Management" feature in the app.
- Low Voltage Remind: Automatic reminders to change batteries when the power level is low.
- Voice Control: Compatible with Alexa and Google Assistant for convenient voice commands.
Setup Guide
1. Pre-installation Checklist
- Ensure a Tuya Zigbee gateway is available for configuration.
- Your smartphone must be connected to a 2.4GHz Wi-Fi network.
- Have your Wi-Fi password ready.
- Your smartphone operating system must be Android 4.4+ or iOS 8.0+.
- If your Wi-Fi router has a device limit, consider disabling other devices or using another router.
2. App Installation
- Scan the QR code below or search for "Smart Life" in the Google Play Store or Apple App Store to download and install the app.
- Create an account using your mobile number and the authentication code provided.
3. Device Pairing (Connecting to Tuya Zigbee Hub)
- Connect your mobile phone to your 2.4GHz Wi-Fi router.
- In the Smart Life app, click the "+" icon in the upper right corner of the homepage or select "Add Device".
- From "Gateway Control", select "Wireless Gateway (Zigbee)".
- Choose "Blink Quickly" mode. Ensure the blue light is on and the red light is blinking quickly. If not, press and hold the reset button on the sensor for approximately 5 seconds until the red indicator blinks quickly.
- Click "+ Add subdevice", then navigate to "More device reset methods" and select "Contact Sensor".
- Remove the insulation sheet from the sensor. If the LED indicator is not blinking rapidly, open the back cover and hold the reset button for about 5 seconds until the indicator blinks rapidly.
- The app will automatically search for nearby devices and add the sensor successfully.
4. Physical Installation
- The sensor can be installed on doors, windows, drawers, mailboxes, garages, cabinets, or any other objects that open and close.
- Important: This device is not waterproof. Install it indoors or in areas where it will not be exposed to water.
- Before final installation, test the sensor to ensure it functions correctly in your chosen location.
- Clean the installation area with a clean, dry towel.
- Use the provided 3M adhesive tapes to attach the sensor. Press firmly for about 10 seconds to ensure a secure bond.
- Ensure the main sensor body and the magnet are aligned with the arrows, and the gap between them is less than 10mm when the door/window is closed.
Operating Instructions
1. App Remote Control (Smart Life)
- Real-time Monitoring: View the open/close status of your doors/windows from anywhere, anytime.
- Notifications: Receive instant push notifications for any detected activity.
- Alarm Recording: Access a history of all open/close events and monitor battery levels.
- Device Sharing: Share control of the sensor with family members through the app.
- Cloud Event Recording: Events are recorded in the cloud for review.
2. Voice Control (Alexa & Google Assistant)
Integrate your sensor with Amazon Alexa or Google Assistant for hands-free control and status checks.
- Example Command: "Alexa, is my front door locked?"
- Response: "Yes, the front door is locked."
- You can also set triggers, for example, to turn on lights when a door is opened.
Maintenance
- Battery Replacement: The sensor is powered by a CR2032 battery. When the app indicates a low battery, replace it promptly to ensure continuous operation. The battery compartment is designed for easy access.
- Cleaning: Periodically wipe the sensor and magnet with a clean, dry cloth to remove dust and debris. Avoid using liquids or abrasive cleaners.
- Environmental Care: Ensure the sensor remains in an indoor, dry environment as it is not waterproof.
Troubleshooting
- Sensor not responding:
- Verify that your Tuya Zigbee Hub is powered on and connected to your network.
- Check the battery level in the Smart Life app. Replace the CR2032 battery if low.
- Ensure the gap between the sensor and magnet is less than 10mm when closed.
- Confirm the sensor and magnet are correctly aligned (arrows pointing towards each other).
- Check your home Wi-Fi network (2.4GHz) for stability.
- If issues persist, try re-pairing the device by holding the reset button for 5 seconds.
- No notifications:
- Check notification settings within the Smart Life app.
- Ensure your smartphone's notification settings allow alerts from the Smart Life app.
- Verify your phone has a stable internet connection.
- Voice control not working:
- Ensure the Smart Life app is correctly linked to your Alexa or Google Assistant account.
- Use the exact voice commands as specified in the Alexa/Google Home app.
- Check the internet connection of your voice assistant device.
Specifications
| Attribute | Value |
|---|---|
| Model Number | ZD08 |
| Material | ABS |
| Sensor Size (Main Body) | 52.5 x 26.5 x 13 mm |
| Magnet Size (Small Body) | 34.5 x 12.5 x 13 mm |
| Working Voltage | DC 3V (CR2032 Included) |
| Battery Life | Over 1 year (20 times/day) |
| Wireless Type | Zigbee IEEE802.15.4 / Zigbee 3.0 |
| Trigger Distance | ≤ 10 mm |
| Working Temperature | -10°C ~ +50°C |
| Origin | Mainland China |
| Smart Home Platform | Tuya, Google Assistant, Alexa |
| Certification | FCC, CE, RoHS |
| APP Name | Smart Life |
| EU LVD Voltage | Below 50Vac or 75Vdc |
| High-concerned chemical | None |
User Tips
- Test Placement: Before permanently attaching the sensor with adhesive, temporarily place it and test its functionality to ensure optimal signal and detection.
- Comprehensive Coverage: For enhanced security, consider installing multiple sensors on all entry points (doors, windows) to protect your home completely.
- Regular Battery Checks: Make it a habit to check the battery status in the Smart Life app regularly to avoid unexpected power loss.
- Wireless Range: The sensor offers a wireless transmission range of up to 400ft, but actual performance may vary based on environmental factors and obstacles.
Warranty and Support
For detailed warranty information and technical support, please refer to the official product documentation or contact the seller directly. A comprehensive user manual in PDF format is available for download: User Manual (PDF).