MYOSLIM 6500W HI-EMT Fat Burning Massager

Contents

MYOSLIM RF EMS Body Sculpting Machine User Manual

Model: 6500W HI-EMT Fat Burning Massager

1. Introduction

The MYOSLIM RF EMS Body Sculpting Machine is a high-end beauty device designed for weight loss, muscle gain, and body shaping. It utilizes HIEMT (High-Intensity Pulsed Electromagnetic) and EMS (Electrical Muscle Stimulation) technologies, combined with RF (Radiofrequency) for enhanced fat burning, muscle stimulation, and skin tightening. This manual provides essential information for the safe and effective operation of your device.

2. Safety Information

  • Ensure the machine is connected to the correct power supply (110V or 220V AC) and plug type (US, EU, UK, AU) as specified.
  • Do not use the device over the heart area, head area, or on patients with implants.
  • Always consult the user manual (PDF) for detailed safety guidelines. A comprehensive user manual in PDF format is available for download: User Manual (PDF).

3. Product Overview

The MYOSLIM Body Sculpting Machine features a user-friendly interface and multiple applicators for various body areas.

Front view of the MYOSLIM Body Sculpting Machine with two applicators
Figure 1: Front view of the MYOSLIM Body Sculpting Machine.
Back view of the MYOSLIM Body Sculpting Machine showing power input and applicator connections
Figure 2: Back view of the machine with power and applicator connections.
Close-up of a cushion handle applicator for the body sculpting machine
Figure 3: Cushion handle applicator.

4. Setup

  1. Unpack the machine and all accessories.
  2. Place the machine on a stable surface.
  3. Connect the power cord to the machine and a suitable power outlet.
  4. Connect the desired applicators (handles) to the machine.

5. Operating Instructions

5.1 Power On/Off

  1. **Power On**: Plug in the power cord and turn on the switch at the back of the machine. The screen will display the MYOSLIM logo and then the main interface.
  2. **Power Off**: Press and hold the power button on the machine for approximately 3 seconds. A prompt will appear on the screen asking "Turn off the power?" Click the "yes" button on the screen to confirm shutdown.
Screen showing power off confirmation on the MYOSLIM machine
Figure 4: Power off confirmation screen.

5.2 Interface Navigation

The main interface has three tabs: List, Pattern, and Records.

  • List: Represents the main interface where you can select treatment modes.
  • Pattern: Allows you to enter detailed settings for the selected pattern.
  • Records: A memory card function that generally does not require settings.
Video 1: Demonstration of machine setup and interface navigation.

5.3 Treatment Modes

The machine offers two main modes: Pattern 1 (Simple Mode) and Pattern 2 (Advanced Mode).

5.3.1 Pattern 1 (Simple Mode)

This mode is concise and primarily requires adjusting the energy intensity. The initial interface for RF and ENERGY will reset to zero. You can select the user part, gender, age, and other detailed questions and energy levels.

Operation Process (3 Stages, approx. 30 minutes per area):

  1. **Stage 1 (3-5 minutes)**: Adjust machine energy to 20% or even lower. This allows muscles to gradually receive EMS energy stimulation and frequency stimulation.
  2. **Stage 2 (5-25 minutes)**: As the customer's muscles adapt, gradually increase energy intensity. Listen to customer feedback to adjust intensity as needed.
  3. **Stage 3 (Last 3-5 minutes)**: Reduce machine energy by 20% or more to decrease EMS stimulation and frequency, alleviating muscle fatigue.

5.3.2 Pattern 2 (Advanced Mode)

This mode allows for detailed adjustment of both stimulation frequency (10HZ-200HZ) and energy intensity. The machine has an intelligent control system that recommends values, which can be used directly.

Frequency Adjustment Rule:

  • Large muscles: Lower frequency (10HZ-40HZ)
  • Medium muscles: Medium frequency (40HZ-100HZ)
  • Small muscle groups: Higher frequency (100HZ-200HZ)

It is recommended to use all three frequencies in practical application, as the intelligent control system will cross-use them for optimal training effects. The operation process is similar to Pattern 1, divided into three stages for best results.

5.4 Application

You can tie the handle to your abdomen or hips and turn on the machine's start button. The machine will achieve the effect of weight loss and slimming through electric current stimulation and high-frequency vibration.

Diagram illustrating muscle building, buttocks lift, and weight loss with EMT+EMS technology
Figure 5: EMS Body Sculpting for muscle building, buttocks lift, and weight loss.
Diagram showing the muscle warm-up process during treatment
Figure 6: Muscle Warm-Up process.
Diagram showing supramaximal muscle contractions achieved by the device
Figure 7: Supramaximal muscle contractions.

6. Maintenance

  • After each use, wipe the handle and machine surfaces with a damp paper towel.
  • Ensure the machine is unplugged before cleaning.
  • Store the machine in a clean, dry place away from direct sunlight.

7. Troubleshooting

  • Machine not powering on: Check if the power cord is securely plugged in and the switch at the back is turned on.
  • No stimulation from applicators: Ensure applicators are correctly connected and the energy intensity is set above zero in the selected mode.
  • Unusual noise or overheating: Immediately turn off the machine and contact customer support.

8. Specifications

Attribute Value
Brand Name MYOSLIM
Power Supply Alternating Current
Voltage 50-1000V AC
Material ABS
Origin Mainland China
Certification CE
Item Type Massage & Relaxation
Operation Method Handheld Type
Technology HIEMT+RF 2 in 1 Slimming, High Intensity Pulsed Electromagnetic Body Sculpting
Functions body contouring, body slimming, body sculpt, muscle build, fat removal, skin tight, butt lift, muscle build, muscle stimulation, EMS Cellulite Reductions
Handle Options 4/5 handles Optional
Target Area Body, Legs/Arms, Hands, Abdomen, Hips
Training Site Waist, ARMS, Legs, Muscle Relex Apparatus, Waist & Abdomen Exercise, head, Foot, BACK, Hand, Wrist, Hip, Chest, CORE, other
Type of Sports Muscle Relaxation
Product Name Body Sculpt Machine, EMS HIEMT Body Slimming Sculpting Machine
Technology Advantage No-invasive non-exercise healthy slimming
Usage Time Three times a week, 30-40 minutes each time.

9. Warranty and Support

  • Warranty: 12 months.
  • After-sales Service: Video technical support, Online support.
  • Our Service Includes: 24 hours online service, instructions, operation video training, lifetime maintenance, component replacement, consultation service anytime, and one-on-one video connection to explain the operation.
  • Repair Centers: Dual repair centers in Mexico and Europe for faster overseas local after-sales service, reducing international shipping costs and repair time.

10. User Tips

  • For best results, use the machine 2-3 times a week. Visible improvement should be seen after 4-8 weeks of continuous use.
  • Always start with lower energy settings and gradually increase based on your comfort and muscle adaptation.
  • Pay attention to your body's response during treatment and adjust settings accordingly.
  • Ensure the applicators are securely fastened to the treatment area for effective stimulation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.