1. Introduction
Thank you for choosing the J16 4G Mini GPS Tracker. This device is designed to provide reliable real-time tracking, historical trajectory playback, and various alert functions for your vehicle or asset. Please read this manual carefully before use to ensure correct operation and to fully utilize all features.
2. Package Contents
Standard Accessories:
- J16 4G Mini GPS Tracker Unit
- Power Connection Cables
- Quick Installation and Operation Manual
- Double-sided Adhesive
Optional Accessories (may vary by package):
- Relay
- SOS Button
- Microphone (MIC Phone)

Figure 2.1: J16 GPS Tracker and included accessories.
3. Specifications
| Feature | Description |
|---|---|
| GSM Frequencies | 850/900/1800/1900MHz |
| LTE-FDD Bands | B1/B2/B3/B4/B5/B7/B8/B28/B66 |
| Operating Voltage | DC 9V to 90V |
| Positioning Time (Hot Start) | ≤2 seconds (open air) |
| Positioning Time (Cold Start) | ≤32 seconds (open air) |
| Location Accuracy | ≤30 meters |
| Operating Temperature | -20°C to +55°C |
| Built-in Battery | 140mAh (3.7V) |
| Vibration Sensor | Yes |
| Weight | 51g |
| Dimensions (L×W×H) | 80 × 39 × 17mm |
| Communication Module | SIMCOM7670SA |
| Network Protocol | TCP/IP |

Figure 3.1: Dual satellite positioning (GPS + BeiDou) for enhanced accuracy.
4. Setup
4.1 SIM Card Installation
- Ensure the GPS tracker is powered off before inserting or removing the SIM card.
- Obtain a standard GSM SIM card that supports GPRS data services. This is crucial for the tracker's communication functions.
- Locate the SIM card slot on the device.
- Insert the SIM card with the cut corner oriented correctly and the chip facing the USB port (or as indicated by the slot diagram). Gently push the SIM card into the slot until it clicks into place.
4.2 Device Installation
The J16 GPS tracker is designed for discreet installation. It is recommended to have the device installed by a professional technician. When choosing an installation location, consider the following:
- Hidden Location: Install the tracker in a concealed spot to prevent tampering or easy discovery.
- Waterproof: Ensure the chosen location is dry and protected from water exposure.
- Avoid Signal Interference: Do not place the tracker near strong signal sources such as reverse radars, anti-theft devices, or other vehicle communication equipment, as this may interfere with GPS/GSM signals.
- GPS Antenna Orientation: The side of the tracker with the GPS antenna (typically the side without adhesive) must face upwards towards the sky. Ensure there are no metal objects directly covering the tracker, as metal can block GPS signals.
Recommended Installation Positions:
- Under the decorative trim below the front windshield.
- Around the dashboard, covered by non-metallic material.
- Under the decorative trim below the rear windshield.
- Inside the car door or central pillar.
- Inside the panel of an electric bicycle/motorcycle or under the rear seat.

Figure 4.1: Recommended installation positions for various vehicle types.
4.3 Wiring Instructions
Use the power connection cables provided by the manufacturer. Incorrect wiring can damage the device or vehicle.
- Red Wire (Power Anode +): Connect to the positive terminal of the vehicle's power supply (e.g., battery positive).
- Black Wire (Power Cathode -): Connect to the vehicle's ground or chassis. Ensure this connection is separate from other ground lines to avoid interference.
- Orange Wire (ACC Ignition): Connect to the vehicle's ACC (Accessory) switch. This allows the tracker to detect ignition status and enable automatic anti-theft functions. If this line is not connected, the tracker will enter fortification mode upon power-up and trigger vibration alarms even during driving.
- Yellow Wire (Fuel/Power Cut Control - Optional): If you are using the optional fuel/power cut-off feature with a relay, connect this yellow wire to the thin yellow wire of the disconnector (relay).
Relay Wiring (for optional fuel/power cut-off):
The relay typically has 5 pins (85, 86, 87, 87a, 30). For fuel/power cut-off, you will typically wire it as follows:
- Pin 85: Connect to the tracker's Yellow (control) wire.
- Pin 86: Connect to vehicle's positive power supply (12V).
- Pin 30: Connect to the vehicle's original fuel pump power input.
- Pin 87a: Connect to the vehicle's original fuel pump power output.
- Pin 87: (Not used for normal open circuit cut-off).
Important: Ensure all wiring is secure and insulated to prevent short circuits. If unsure, consult a professional.
5. Operating Instructions
5.1 LED Status Indicators
The tracker has two LED indicators to show its operational status:
| LED Color | Status | Meaning |
|---|---|---|
| Yellow (GSM) | Flashing | GSM module initializing |
| Yellow (GSM) | Constant On | GPRS working / Online |
| Yellow (GSM) | Off | GSM module in sleep mode |
| Blue (GPS) | Flashing | Searching for GPS signal |
| Blue (GPS) | Constant On | GPS positioning successful |
| Blue (GPS) | Off | GPS module in sleep mode |
5.2 Basic Functions
- Real-time Tracking: Monitor the current location of your asset in real-time via the tracking platform or mobile app.
- Historical Trajectory: Review past travel routes and activity of the tracker for specific time periods.
- Electronic Fence (Geo-fence): Set up virtual boundaries on the map. Receive alerts when the tracker enters or exits these predefined areas.
- Vibration Alarm: The device will send an alert to your phone if it detects abnormal vibrations.
- Phone Alarm: In alarm conditions, the device can automatically dial a preset phone number.
- SMS Alarm: Receive alarm notifications via SMS messages, ensuring alerts even without internet access on your phone.
- Fuel/Power Cut-off: (Optional, with relay) Remotely cut off the vehicle's fuel or power supply in case of theft.

Figure 5.1: Example of the monitoring interface for tracking multiple devices.
5.3 Tracking Platform and Mobile Application
The J16 tracker can be monitored using a dedicated mobile application (for iOS and Android) and a PC-based tracking platform. These platforms allow you to view real-time location, set geo-fences, review history, and manage alerts.

Figure 5.2: Professional tracking software available on mobile and PC platforms.
5.4 SMS Commands
The tracker can be configured and controlled via SMS commands sent from a registered mobile phone to the SIM card number inside the tracker. Use a space as a separator and ensure commands are in uppercase as specified.
Note: A comprehensive list of SMS commands and their parameters is available in the full PDF user manual. Please refer to it for detailed instructions.
Common SMS Commands:
- STATUS#: Check device status.
- WHERE#: Get device's current latitude and longitude.
- SERVER,1,domainname,port,0# or SERVER,0,IP,port,0#: Set the server IP address or domain name.
- SOS,A,Number1,Number2,Number3#: Add SOS numbers.
- RELAY,0# or RELAY,1#: Control the relay (0 for on, 1 for off).
6. Maintenance
- Keep the device dry. Moisture can damage internal circuits.
- Avoid extreme temperatures. High temperatures can shorten the life of electronic devices and deform plastic parts.
- Do not drop, knock, or shake the device. Rough handling can break internal circuit boards.
- Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. Wipe it with a soft, dry cloth.
- Ensure the device is securely mounted to prevent vibrations and disconnections.
7. Troubleshooting
If you encounter issues with your J16 GPS Tracker, please refer to the table below for common problems and solutions. If the problem persists, contact your reseller for support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Poor Signal Reception | Tracker is in an area with poor reception (e.g., tall buildings, underground parking). | Move the tracker to an open area with good signal reception. |
| Platform shows tracker disabled/offline | Main power line not connected correctly; SIM card not installed; SIM card GPRS function not active; Weak signal. | Check power connections; Verify SIM card installation; Contact provider to activate GPRS; Move to an area with strong signal. |
| Incorrect Location on Map | GPS has no position; Vehicle not moving after installation. | Go to an open space for GPS positioning; Drive the vehicle on the road. |
| Main Power Disconnected Alert | Poor contact of power lines. | Check if power lines are securely connected. |
| LEDs are off or not behaving as expected | Device in sleep mode; Power issue; SIM card issue. | Check power supply; Verify SIM card is correctly inserted and active; Send SMS command to wake up if in sleep mode. |
8. User Tips
No specific user tips were available from reviews or Q&A for this product.
9. Warranty and Support
9.1 Warranty Information
This product comes with a warranty period of one (1) year from the date of purchase, covering manufacturing defects under normal use. Please retain your purchase receipt and the warranty card (if provided) as proof of purchase.
The warranty does not cover:
- Damage caused by unauthorized disassembly or repair.
- Damage due to water immersion, circuit board burning, or other liquid damage.
- Damage resulting from improper installation, use, maintenance, or storage.
- Damage caused by external forces or natural disasters.
- Product IMEI number being torn or blurred.
- Warranty voucher not matching the product model or being altered.
Important: Any consequences caused by illegal installation or operation outside the supported voltage range are the sole responsibility of the user.
9.2 Technical Support
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact your original reseller or point of purchase. They will be able to provide specific support and guidance for your device.