1. Product Information
The TSG-17 is a high-frequency, high-accuracy signal generator designed to provide stable RF and AM signals for various electronic devices and circuits. Its advanced circuit design ensures minimal accuracy deviation, making it a reliable tool for testing and measurement.
- Product Name: TSG-17 100KHz-150MHz Function Generator High-Frequency High-Accuracy Signal Generator 10A-18A
- Model: 11102100405
- Batch/Serial Number: ALI5545957646
- Material: Iron (wear-resistant and durable)
- Key Features: Small size, light weight, and portability for versatile use.
2. Setup
Before operating the TSG-17 signal generator, ensure it is properly set up.
- Unpacking: Carefully remove the signal generator and all accessories from the packaging.
- Power Connection: Connect the provided power cable to the device and then to a suitable power outlet. Ensure the power switch on the front panel is in the 'OFF' position before connecting to power.
- Test Lead Connection: Connect the signal test line to the appropriate output port (e.g., RF OUTPUT or MOD.IN/AUDIO OUT) as required for your application.
3. Operating Instructions
The TSG-17 provides high-frequency signals and modulation capabilities. Follow these steps for operation:
- Power On: Flip the red 'POWER' switch on the front panel to the 'ON' position.
- Select Frequency Range: Use the 'RANGE' selector buttons (A, B, C, D, E, F) to choose the desired frequency band.
- Adjust Frequency: Rotate the large 'FREQUENCY' dial to fine-tune the output frequency within the selected range.
- Adjust RF Output Level: Use the 'RF LEVEL' knob to control the amplitude of the RF output signal (1mV-100mV).
- Modulation Settings:
- MOD.MODE: Select 'INT' for internal modulation (1KHz) or 'EXT' for external modulation.
- MOD LEVEL: Adjust the modulation depth.
- MOD FREQUENCY: Adjust the frequency of the internal modulation signal.
- External Modulation: If 'EXT' is selected, an external modulation signal (50Hz~20KHz) can be applied via the 'MOD.IN/AUDIO OUT' port. The 1KHz modulation signal can reach 80% or 100% overmodulation.
- Output: The generated signal is available at the 'RF OUTPUT' port.
4. Maintenance
To ensure the longevity and optimal performance of your TSG-17 signal generator, follow these maintenance guidelines:
- Cleaning: Keep the device clean by wiping it with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Storage: Store the signal generator in a cool, dry place away from direct sunlight, dust, and extreme temperatures.
- Handling: Handle the device with care to prevent physical damage. The iron material construction provides durability.
- Power Off: Always power off the device and disconnect it from the power source when not in use for extended periods.
5. Troubleshooting
If you encounter issues with your TSG-17 signal generator, consider the following basic troubleshooting steps:
- No Power:
- Check if the power cable is securely connected to both the device and the power outlet.
- Ensure the power outlet is functional.
- Verify the power switch is in the 'ON' position.
- No Output Signal:
- Check if the test leads are correctly connected to the 'RF OUTPUT' port and your measuring device.
- Ensure the 'RF LEVEL' knob is not set to minimum.
- Verify that a frequency range is selected and the frequency dial is set.
- Incorrect Signal:
- Confirm the selected frequency range and dial setting match your desired output.
- Check modulation settings if an AM signal is expected.
If problems persist after these steps, please contact customer support.
6. Specifications
| Parameter | Value |
|---|---|
| Model | TSG-17 |
| Material | Iron |
| Frequency Range | 100KHz-150MHz |
| Frequency Accuracy | ±5% |
| Output Waveform | RF/AM Signal Waveform |
| Output Impedance | 600Ω |
| RF Output | >100Mvrms (Range Frequency≤35MHz) |
| Level Control | 1mV-100mV |
| External Modulation | 150Hz-1.5KHz, Amplitude modulation approx. 0-30% adjustable |
| Working Environment | 50Hz-20KHz |
Frequency Bands:
- A: 100KHz-300KHz
- B: 300KHz-1MHz
- C: 1MHz-3.2MHz
- D: 3MHz-10MHz
- E: 10MHz-35MHz
- F: 32MHz-150MHz
7. User Tips
Based on available information, no specific user tips or common usage advice were provided in buyer reviews or Q&A content for this product.
8. Warranty & Support
For product support, warranty claims, or technical assistance, please contact the manufacturer or their authorized representative:
Manufacturer Information:
Company Name: shanghai huang shi mao yi Co., Ltd.
Full Address: Room 3389, Building 2, No. 88, Changxu Road, Juyuan New District, Jiading District, Shanghai
Email: b162sumaitn2822@163.com
Telephone: 86-13876659222
EU Authorized Representative:
AR Company Name: SOLID AUTHORITY LIMITED
Full Address: IE-51 Bracken Road, Sandyford, Dublin 18, D18 CV48, Ireland
Email: phoebe8706@gmail.com
Telephone: 33-761441379
Compliance Information:
WARNING: To avoid danger of suffocation, keep this plastic bag away from babies and children.