CYCPLUS M1 GPS Bike Computer User Manual

1. Introduction

The CYCPLUS M1 is a smart GPS bike computer designed to track and display various cycling data. It features a large LCD screen, ANT+ and BLE connectivity for external sensors and app synchronization, and a long-lasting battery.

2. Setup

2.1. Physical Installation

To install your CYCPLUS M1 GPS Bike Computer:

1. If using the optional CYCPLUS bike computer mount (sold separately), attach it to your handlebars.
2. For the standard bike computer mount, cross-fix the mount to your handlebars using the provided rubber bands.
3. Align the convex part on the back of the device with the mount and gently push, then rotate clockwise until it locks into place (a click sound will be heard).

2.2. Initial Power On & GPS Location

1. Press the left button (◀◀II) to turn on the device.
2. To receive satellite signals, ensure the device is static and in an open, barrier-free area. GPS signal acquisition may take a few minutes. A satellite icon will appear when the device is ready.

3. Operating Instructions

3.1. Button Functions

• Left Button (◀◀II):
  • Short press: Power On / Start Recording / Pause Recording
  • Long press: Power Off
• Mid Button (◎):
  • Short press: Count Lap
  • Long press: Save Record
• Right Button (↻):
  • Short press: Go to next page
  • Long press: Enter/Exit Settings

3.2. Recording and Saving Data

1. After GPS signal acquisition, short press the left button (◀◀II) to start recording data. A play icon (▶) will appear.
2. During your ride, the device will display real-time data such as speed, cadence, heart rate, power, time, distance, altitude, and temperature.
3. To save the recording data after your ride, long press the mid button (◎). The play icon (▶) will disappear, indicating data has been saved.
4. To turn off the device, long press the left button (◀◀II).

4. Settings

To enter the settings menu, long press the right button (↻). Short press the right button (↻) to switch between the 8 setting pages (C2-C9). Use the left button (◀◀II) to start setting an option, the right button (↻) to modify digits, and the mid button (◎) to switch between setable digits. Press the left button (◀◀II) to finish setting. Long press the right button (↻) to return to the home page after finishing settings.

4.1. ANT+ Sensor Connection (C2)

In the C2 setting page, short press the left button (◀◀II) to start searching for ANT+ sensors. Data will appear on the screen once a sensor is connected. If no signal is found, the sensor digits will flash. The device will automatically return to the home page after 10 seconds if no connection is made.

4.2. Unpair Sensors (C9)

In the C9 setting page, short press the left button (◀◀II) to unpair all previously paired sensors.

4.3. Wheel Circumference Setting (C3)

In the C3 setting page, you can set the wheel circumference. Refer to the Tire Circumference Chart in the Specifications section for common values.

4.4. Time Zone Setting (C4)

In the C4 setting page, set your local time zone.

4.5. Speed Unit Setting (C5)

In the C5 setting page, switch between KMH (kilometers per hour) and MPH (miles per hour) as your preferred speed unit.

4.6. Temperature Unit Setting (C6)

In the C6 setting page, switch between Celsius (℃) and Fahrenheit (℉) for temperature display.

4.7. Factory Reset (C7)

In the C7 setting page, long press the mid button (◎) to restore factory settings. The computer will turn off after the reset is complete.

4.8. Odograph Setting (C8)

In the C8 setting page, you can set the initial value for the odometer (total distance).

5. App Connection

The CYCPLUS M1 can connect to the "CYCPLUS Fit" app via Bluetooth (BLE 5.0) for data analysis and synchronization.

1. Scan the QR code provided or search for "CYCPLUS Fit" on Google Play (Android) or the App Store (iOS) to download the app.
2. Open the app and follow the instructions to add your device (M1). Ensure Bluetooth is enabled on your phone and the M1 is in pairing mode.
3. Once connected, you can view sports data, analyze your cycling track, perform firmware updates, and synchronize your data with platforms like Strava.

6. Maintenance

• Cleaning: Wipe the device with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Waterproof: The device is IPX6 waterproof, meaning it is rain-proof. However, it should not be submerged in water for extended periods.
• Battery: The built-in 1200 mAh rechargeable battery provides up to 60 hours of continuous use. Charge via the Type-C port. Charging takes approximately 3.5 hours.
• Memory: The device has 150 hours of internal memory. When the memory is full, the computer will overwrite older records chronologically. Regularly sync data to the app to prevent loss.
• Backlight: After setting the time zone, the backlight will automatically turn on every night from 18:00 to 9:00. Pressing any button will activate the backlight, which will turn off after 10 seconds of inactivity.

7. Troubleshooting

• No GPS Signal: Ensure the device is in an open area with no obstructions. Remain static for a few minutes during initial power-on to allow for signal acquisition.
• Sensors Not Connecting: Check that your ANT+ sensors are active and within range. Ensure the M1 is in the correct setting page (C2) to search for sensors. If issues persist, try unpairing all sensors (C9) and re-connecting.
• App Connection Issues: Make sure Bluetooth is enabled on your phone and the M1. Ensure the "CYCPLUS Fit" app is installed and updated. Try restarting both the M1 and your phone. If the app still doesn't connect, try re-pairing the device within the app.
• Incorrect Data: Verify that the wheel circumference (C3) and speed unit (C5) settings are correct.
• Device Not Responding: If the device becomes unresponsive, try a factory reset (C7). Note that this will erase all settings and data.

8. Specifications

Tire Circumference Chart

Use this chart as a reference for setting the wheel circumference. The actual circumference may vary slightly depending on tire pressure.

9. User Tips

• App Connection: If you encounter difficulties connecting to the app, ensure your phone's Bluetooth is on, the app is updated, and the M1 is in pairing mode. Restarting both devices can often resolve connection issues.
• Data Saving: Always remember to long-press the mid button after your ride to save your recording data to prevent loss.
• GPS Signal: For faster GPS acquisition, ensure the device is in an open space and remains static for a few minutes after powering on.

10. Warranty & Support

Manufacturer: Chengdu Chendian Intelligent Technology Co., Ltd.

Address: No. 88 Tianchen Road, Chengdu, Sichuan Province, China

Warranty: Free repair or replacement is provided within 2 years from the date of purchase for damage not caused by human factors.

Contact E-mail: steven@cycplus.com

The manufacturer reserves the right to modify product design, features, or accessories without prior notice to continuously improve functionality and user experience. The actual product may differ from the description in this manual.