1. Introduction and Functional Statement
Thank you for choosing the CARABC Wireless Carplay Android Auto Module. This module integrates advanced smartphone connectivity into your Toyota vehicle's infotainment system, enhancing your driving experience with navigation, music, and communication features.
Key Functions:
- CarPlay / Android Auto: Seamless integration with your iPhone or Android device. Supports both wireless and wired connections. Provides voice command and control for phone calls, messages, navigation, and music.
- Reversing Video Input: The smart module can decode video signals, allowing for the integration of a rear-view camera.
- Mirroring: Supports wired and wireless screen mirroring for both iPhone and Android phones, displaying your phone's screen directly on the car's display.
- USB Video Playback: Enables direct playback of video and audio media from a USB drive.


2. Specifications
| Feature | Specification |
|---|---|
| Operating Voltage | 5V |
| Power Consumption | 1A (rated), 3A (Max) |
| Quiescent Current | Less than 3mA |
| Charging Current | <2A (If USB charging current >1A, host activates circuit protection to control current below 1.5A to prevent damage) |
| Operating Temperature | -30°C to +75°C |
| Stored Temperature | -30°C to +85°C |
| Environment Humidity | <98% (at 45°C), 65±5% (rated) |
| Shutdown Current | 300mA (Clock is on) |
| Product Size (Host) | 128mm * 84mm * 25mm |

3. Compatibility
This CARABC module is designed for Toyota vehicles equipped with the Touch 2 & Entune 2.0 infotainment system. It is compatible with more than 90% of Toyota models from 2014-2019.
Important Compatibility Notes:
- Not suitable for cars with 360-degree camera or Bird's Eye View system.
- Not suitable for car radios with JBL System.
- 2014-2019 Toyota 4Runner: Only fits Panasonic & Fujitsu head units; Pioneer is not supported.
- 2014-2019 Toyota Corolla: Not compatible with 86140-02540 Fujitsu with 7" display.
- 2016-2019 Toyota Prius: Not compatible with Prius models equipped with an 11.6" screen.
- 2014-2018 Toyota RAV4: Not compatible with 86100-42241 head units.
Compatible Toyota Models (2014-2019, with Touch 2 / Entune 2.0 system):
- Highlander
- Prius c
- Prius v
- Sienna
- Tacoma
- Yaris
- C-HR
- Alphard
- Avensis
- Hilux
- Avalon
- Sequoia
- Tundra
- 86
- Verso
- Land Cruiser
- Camry
- Auris
- Fortuner


4. Setup and Installation
4.1. Connection Diagram
Refer to the diagram below for proper wiring connections. Ensure all connections are secure before powering on the device.

- Connect with Original Car's Main Unit - 24PIN
- Connect with Original Car's Main Unit - 10PIN
- Connect with Original Car's Main Unit - 28PIN
- Connect with Original Car's Plug - 28PIN
- Connect with Original Car's Plug - 10PIN
- Connect with Original Car's Plug - 24PIN
- Forward Looking Input
- Camera Power Supply
- GND (Ground)
- USB Cable
- WiFi Antenna
4.2. Vehicle Dialing Table (DIP Switch Settings)
The DIP switches on the module need to be configured according to your car's head unit type. The default setting is all switches OFF.
| Model | DIP Switch Setting (1-8) | |||||||
|---|---|---|---|---|---|---|---|---|
| Fujitsu Panasonic | OFF | OFF | OFF | OFF | OFF | OFF | OFF | OFF |
| Pioneer | OFF | OFF | OFF | OFF | ON | OFF | OFF | OFF |
Default: All OFF - Applicable to Panasonic Fujitsu mainframes.
Switch 5-ON: - Applicable to Pioneer mainframes.
5. Operating Instructions
5.1. Switching to CarPlay System
There are three methods to switch to the CarPlay interface:
- From the original car screen: First, click the "FM" icon, then click the "AUX" icon to enter the CarPlay interface.
- Using the steering wheel: Long press the voice button to enter.
- If no voice button: Press the "MODE" button to enter.
5.2. Control Key Operation
The module supports control via original car buttons and touchscreen.

Steering Wheel Button Control:
- Volume +: Increase volume.
- Volume -: Decrease volume.
- Previous song: Go to the previous track.
- Next song: Go to the next track.
- Answer the phone: Accept an incoming call.
- Hang up the phone: End a call.
- Short press to wake up Siri: Activate Siri voice assistant.
- Long press (2s) to switch CarPlay system: Toggle between the original car system and CarPlay.
5.3. Wireless CarPlay Connection Method
For wired connection, simply connect your phone cable to the original car's USB port, then click "Use CarPlay" in the pop-up window.
For wireless connection, follow these steps:
- Step 1: On your car's infotainment screen, select "Bluetooth".
- Step 2: On your iPhone, go to Bluetooth settings and check for a device name starting with "CAR-BT-xxxx".
- Step 3: Turn on Wi-Fi on your iPhone and keep it on. Return to Bluetooth settings and connect to the "CAR-BT-xxxx" device.
- Step 4: Select the Bluetooth device name (e.g., "CAR-BT-XXX"). A pairing request will appear. Choose to "Pair" and then "Use CarPlay" when prompted.
5.4. Apple Wireless Screen Mirroring
- Step 1: On your car's infotainment screen, select "Airplay".
- Step 2: On your iPhone, go to Wi-Fi settings and search for "CAR-WIFI-XXX". Connect to it using the password 66668888.
- Step 3: After successful Wi-Fi connection, return to your iPhone's main interface. Open the Control Center (shortcut menu) and select "Screen Mirroring".
- Step 4: From the list of devices, select "Airplay" to complete the wireless screen mirroring.
5.5. Wireless Android Auto Connection Method
For wired connection, connect your phone cable to the original car's USB port, then click "Allow" in the pop-up window.
For wireless connection, follow these steps:
- Step 1: On your car's infotainment screen, select "Bluetooth".
- Step 2: On your Android phone, go to Bluetooth settings. You should see a device name starting with "CAR-BT-xxx".
- Step 3: Click on the Bluetooth name "CAR-BT-xxx". A pairing request will appear. Click "Pair". After successful pairing, your phone will prompt you to enable the Android Auto option. Confirm it.
- Step 4: Once paired, open the Android Auto app on your mobile phone. The system should connect automatically.
5.6. Android Wireless Screen Mirroring
- Step 1: Scan the QR code provided in the manual (or search online) to download and install the AutoLink Pro app on your Android phone.
- Step 2: On your car's infotainment screen, switch the WifiAutoLink setting to "ON" in the Settings page.
- Step 3: Open the AutoLink Pro app on your phone. Search for "WiFiAutolink-xxx" and connect. Then, click "START NOW" on the phone's prompt box.
- Step 4: After the AutoLink connection, touch reverse control and media sound will be enabled. Note that media sound still needs to connect with Bluetooth.
6. Settings
6.1. Camera Selection
You can select between OEM Camera and Aftermarket Camera options. The default regular resolution is 670*470.
- Senna L/R: Not full 709*470.
- RAV4 6" Left offset: 670*470.
6.2. Audio Settings (AEC Delay)
To correct echo issues during calls, use the AEC Delay function:
- Navigate to: Settings > Audio > AEC Delay.
- Click the "Start Auto AEC" button.
When correcting echo:
- Keep the car quiet.
- Set the volume to a moderate position.
- Click "start" to cancel echo.
7. Troubleshooting
- No sound or poor audio quality: Check all audio connections. Ensure Bluetooth is correctly paired for media sound during screen mirroring. Adjust AEC Delay settings if experiencing echo.
- CarPlay/Android Auto not connecting wirelessly: Verify Wi-Fi and Bluetooth are enabled on your phone and correctly paired with the module. Ensure the correct device name is selected during pairing.
- Screen mirroring issues: Confirm Wi-Fi connection to the module's network. Ensure the correct mirroring option (Airplay for Apple, AutoLink Pro for Android) is selected and activated on your phone.
- Module not powering on: Check power cable connections to the car's main unit. Ensure the car's ignition is on.
- Incompatibility issues: Double-check your car model, year, and head unit type against the compatibility list. Ensure your car does not have a 360-degree camera, Bird's Eye View, or JBL sound system if specified as incompatible.
8. Maintenance
To ensure the longevity and optimal performance of your CARABC module:
- Keep the module free from dust and moisture.
- Avoid exposing the module to extreme temperatures.
- Do not attempt to open or modify the module, as this may void the warranty.
- Clean the exterior with a soft, dry cloth. Do not use harsh chemicals or solvents.
9. User Tips
- For the best experience, ensure your smartphone's operating system (iOS or Android) is up to date.
- If experiencing intermittent connectivity, try restarting both your phone and the car's infotainment system.
- Always refer to the detailed wiring diagram during installation to prevent incorrect connections.
10. Warranty and Support
All CARABC products undergo strict functional and performance tests to ensure quality. We offer a one-year warranty for our products.
Conditions Not Covered by Free Warranty Service:
- Damage to appearance (scratches, dirt, deformation) after the free warranty period.
- Inconsistent warranty card or purchase certificate with the product model, or altered marks.
- Unclear or missing barcode on the host machine body.
- Damage caused by failure to use, maintain, repair, or refit the product according to the instructions in this manual.
- Damage due to force majeure (e.g., fire, flood, traffic accident, lightning, earthquake).
If you encounter any installation difficulties or other problems, please contact our customer support for assistance.
For a detailed PDF version of this manual, please refer to the User Manual (PDF).