1. Product Overview
This manual provides essential information for the safe and efficient use of your Solar Flood Light with Motion Sensor. This product is designed for both outdoor and indoor use, featuring a motion sensor, multiple lighting modes, and a durable, waterproof design.
Figure 1: Solar Motion Sensor Floodlight overview, highlighting features like 16.4ft cable, motion sensor, 44 LED, and 3 lighting modes.
2. Setup and Installation
Before installation, ensure all accessories are included and turn off the lamp switch to avoid electric shock.
- Choose Installation Position: Mount the lamp body on a wall within the unobstructed range of the human body induction sensor. Install the solar panel in a sunny, unobstructed area to ensure efficient charging. Recommended height: 16.4ft - 23ft.
- Fix the Lamp Body: Align the lamp's back bracket with the wall and secure it tightly with the provided screws. Ensure it is firm.
- Fix the Solar Panel: Secure the solar panel's back bracket with screws. Adjust the angle of the solar panel towards the sun for maximum sunlight absorption. Protect the wiring port from rain and arrange the cable properly for waterproofing.
- Connect the Cable: Align the solar panel's plug with the lamp's interface, insert gently, and tighten the interface to avoid poor contact. Arrange the 5m (16.4ft) cable to prevent winding, tension, or scratches.
- Completion: Check the fixation of the lamp and solar panel, as well as the cable connection. Turn on the lamp switch to use it normally after confirmation.
Figure 2: Step-by-step installation guide for the solar flood light.
Figure 3: The split design allows for flexible outdoor and indoor installation.
3. Operating Instructions
3.1. Switch Button (on the back of the lamp body)
- Toggle to