Opansten IPX4 Waterproof Speaker

Contents

Opansten IPX4 Waterproof Speaker User Manual

Model: IPX4 Waterproof Speaker

1. Introduction

This manual provides instructions for the safe and effective use of your Opansten IPX4 Waterproof Speaker. This portable Bluetooth speaker features an LED light show, hands-free calling, and is designed for use in various environments including pools, parties, camping, and showers.

IPX4 Waterproof Speaker with LED lights and water splashes
The Opansten IPX4 Waterproof Speaker, showcasing its LED lights and water-resistant design.

2. Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

General Warnings:

  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.

Electrical Product Warnings:

  • Do not expose to water, moisture, or extreme heat beyond its IPX4 rating.
  • Do not disassemble, puncture, or crush the battery.
  • Do not dispose of in fire.
  • Use only certified chargers and cables to reduce the risk of fire or electric shock.

Storage:

  • Store in a cool, dry place.
  • Avoid prolonged exposure to direct sunlight or high temperatures.
Icons representing speaker features: Colorful Atmosphere Lamp, IPX4 waterproof rating, Bluetooth 5.0, Long Endurance, Strong Compatibility, Hands-free Calls.
Key features of the speaker, including its IPX4 waterproof rating.

3. Setup

3.1 Unpacking

Remove all protective films from the device. Check the product for any visible damage before first use.

3.2 Charging the Speaker

Connect the Micro USB charging port on the speaker to a certified 5V USB power adapter (sold separately) using the provided charging cable. The LED indicator will show the charging status. Ensure the speaker is fully charged before initial use for optimal battery life.

Diagram showing Micro USB charging port location on the speaker.
Location of the Micro USB charging port and other controls.

3.3 Mounting the Speaker

The speaker features a strong suction cup for mounting. For best results, ensure the surface is smooth, clean, and dry. Wipe out any water stains before attaching. Suitable surfaces include smooth walls, ceramic tiles, and glass. Avoid rough or uneven surfaces.

Diagram showing suitable and unsuitable surfaces for the speaker's suction cup, emphasizing smooth surfaces like glass and ceramic tile.
Guidelines for mounting the speaker using its suction cup.
Speaker mounted on a glass shower wall with a woman in the background.
Example of speaker mounted on a smooth surface in a shower.

4. Operating Instructions

4.1 Power On/Off

Press the Power switch button (indicated by a power icon on the speaker) to turn the speaker on or off.

4.2 Bluetooth Pairing

  1. Ensure the speaker is powered on and in pairing mode (indicated by a flashing LED).
  2. On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
  3. Select "IPX4 Waterproof Speaker" (or similar name) from the list to connect.
  4. A successful connection will be indicated by a solid LED light and an audible prompt.

The speaker features a Bluetooth 5.3 chip for stable transmission up to 10 meters. It also supports True Wireless Pairing for connecting two speakers simultaneously.

Speaker connected via Bluetooth to a smartphone, showing 10m transmission distance.
Bluetooth connectivity and transmission range.
Two speakers demonstrating Bluetooth V5.3 and True Wireless Pairing capabilities.
Bluetooth 5.3 for stable playback and True Wireless Pairing.

4.3 Music Playback Controls

  • Play/Pause: Short press the Play/Pause button.
  • Next Song: Short press the "Next Song" button (forward arrow).
  • Previous Song: Short press the "Previous Song" button (backward arrow).
  • Volume Up: Long press the "Next Song" button.
  • Volume Down: Long press the "Previous Song" button.

4.4 Hands-Free Calling

When connected to your phone via Bluetooth, you can answer incoming calls directly from the speaker. Press the "Telephone answering" button to answer or end a call. The built-in microphone allows for clear communication.

4.5 LED Light Show

The speaker features a colorful RGB light show with 6 lighting colors and 7 lighting modes, synchronized to the beat of your music. Refer to the speaker's controls for changing light modes (if applicable, usually a dedicated button or combination press).

Close-up of the speaker displaying its colorful RGB light show with multiple colors and modes.
The speaker's dynamic RGB light show.
Speaker with musical notes and icons of various devices, illustrating RGB lights synchronized to music.
RGB Colorful Lights synchronized to the beat.

4.6 Battery Level Indication

Press the power button once to check the remaining battery level. The number of illuminated LED indicators will show the approximate power level.

5. Maintenance

  • Cleaning: Clean the product with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • After Use: Disconnect all cables. Turn off the device and store it in a dry, clean place, away from children and direct sunlight.

6. Troubleshooting

Problem Possible Cause Solution
Speaker does not turn on. Low battery. Charge the speaker using the provided USB cable and a 5V adapter.
Cannot pair with Bluetooth device. Bluetooth is off on the device; speaker is not in pairing mode; too far from speaker. Ensure Bluetooth is enabled on your device. Make sure the speaker is powered on and its LED is flashing (pairing mode). Move your device closer to the speaker (within 10m).
No sound or low volume. Volume too low on speaker or connected device; speaker not connected. Increase volume on both the speaker and your connected device. Ensure the speaker is successfully paired.
Suction cup not holding. Surface is rough, dirty, or wet. Ensure the surface is smooth, clean, and dry. Wipe away any water stains before attaching.

7. Specifications

Feature Detail
Brand Opansten
Model IPX4 Waterproof Speaker
Waterproof Rating IPX4 (Effective protection against rain and splashes)
Bluetooth Version 5.3
Transmission Distance Up to 10 meters
Power Source Battery, USB
Sound Mode Immersive Sound Mode, Stereo Sound Mode, Live Sound Mode
Audio Crossover Full-Range
Number of Loudspeakers 1
Channels 2 (2.0)
Cabinet Material Plastic
Input Power <25 W
Voice Control No
Support APP No
Dimensions (Diameter x Depth) 6 cm x 3 cm
Weight Approximately 0.5 kg
Diagram showing the dimensions of the speaker: 6cm diameter and 3cm depth.
Speaker dimensions.

8. User Tips

  • Suction Power: The suction cup is very strong. For optimal adhesion, ensure the mounting surface is perfectly smooth, clean, and dry. Wiping the surface before application can significantly improve hold.
  • Versatile Placement: Users find this speaker great for bathrooms, showers, and even sticking to refrigerators due to its strong suction and waterproof design.
  • Sound Quality: Enjoy clear and loud sound without noise, making it suitable for music and hands-free calls.
  • Bluetooth Connection: The Bluetooth connection is generally stable and reliable, ensuring uninterrupted audio playback.
  • LED Lights: The colorful LED lights are designed to be pleasant and non-dazzling, creating a comfortable ambiance, especially for evening use.

9. Compliance and Manufacturer Information

Manufacturer:

Company Name: Kunming Du Pang Electronic Commerce Co., Ltd.
Address: CN, Yunnan Province, Kuriming City, Xishan District, No. 148 Q, 530112,Area A, Culture Expo Park
Email: 455265833@qq.com
Telephone: 15790575718

EU Authorized Representative:

Company Name: ZHEKAN GmbH
Address: Römeräcker 8, 76297 stutensee, Germany
Email: eken190228@gmail.com
Telephone: eken190228@gmail.com

Compliance Information:

This product complies with all applicable European Union (EU) directives and regulations. Conformity markings (e.g., CE) are affixed to the product. A Declaration of Conformity (DoC) is available upon request.

  • Low Voltage Directive (LVD) 2014/35/EU: Ensures electrical safety under normal and fault conditions.
  • Electromagnetic Compatibility (EMC) Directive 2014/30/EU: Confirms the device does not emit or is not significantly affected by electromagnetic disturbance.
  • RoHS Directive 2011/65/EU & (EU) 2015/863: Restricts the use of certain hazardous substances in electrical and electronic equipment.
  • WEEE Directive 2012/19/EU: Governs waste electrical and electronic equipment disposal and recycling.
  • Battery Directive 2006/66/EC: Addresses battery waste management and restrictions on heavy metals.
CE, UKCA, FCC, and UL certification marks.
Product compliance markings.

10. Product Overview Videos

Overview of the speaker and its accessories.
Demonstration of the speaker mounted in a shower.
Visualizing the speaker's LED lights in a dark environment.
The speaker mounted on a tiled wall.
Demonstration of the speaker's lights and sound.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.