BRS BRS-H22

Contents

BRS-H22 Double Head Outdoor Heater User Manual

Model: BRS-H22 | Brand: BRS

Introduction

The BRS-H22 Owl Double Heating Furnace is a portable infrared gas stove designed for outdoor heating during camping, hiking, and other outdoor activities. It features a dual heating head for efficient warmth, wind-resistant performance, and fuel economy. This manual provides essential information for the safe and effective use of your BRS-H22 heater.

BRS-H22 heaters in a snowy outdoor camping setting with a tent.
BRS-H22 heaters providing warmth in a snowy outdoor camping environment.

Safety Warnings

Failure to follow these safety warnings may result in serious injury or death.

  1. This product can only be used outdoors or in a well-ventilated environment. It is strictly prohibited for use in tents, cars, indoors, or other closed environments.
  2. Avoid using in hot sun or other high-temperature environments.
  3. Before use, carefully check whether there is gas leakage. If a gas leakage phenomenon is detected (e.g., an onion smell), stop using immediately.
  4. The structure of this product is precise; do not transform it yourself to avoid danger.
  5. It is strictly forbidden to disassemble and install the gas tank when the fire is not out. It is also strictly forbidden to disassemble and install the gas tank near an open flame.
  6. Keep away from flammable and explosive objects when using.
  7. Do not place your body parts (pay attention to your head and hands) above the stove to avoid burns.
  8. Children under 12 years old should not use this product alone.
  9. It is strictly forbidden to fall down or tilt when using the product, otherwise, open flame will come out and cause fire danger. (See Figure 1 below for illustration of potential flame).
Diagram showing a hand near a flame, illustrating the danger of tilting the stove.
Figure 1: Illustration of potential flame if the stove is tilted.

Setup Instructions

  1. Connect a Tank:
    • Make sure the valve is closed (turn valve clockwise).
    • Connect and tighten the gas tank to the stove.
    • Note: Check whether air leaks before ignition. Stop ignition immediately if you smell gas (onion smell).
Diagram showing how to connect a gas tank to the BRS-H22 heater.
Step-by-step guide for connecting the gas tank.

Gas Tank Compatibility

The BRS-H22 is compatible with multiple gas sources:

  • 450g tank: Can be used continuously for approximately 6-7 hours.
  • 230g tank: Can be used continuously for approximately 3.5 hours.
  • 220g tank: Can be used continuously for approximately 3.5 hours with a BRS-17 converter.
  • Can be used with a BRS-1 13 tank holder for increased stability.
Diagram showing various gas tank types and their compatibility with the BRS-H22 heater.
Multiple air sources are common for the BRS-H22 heater.

Operating Instructions

  1. Ignite the Burner:
    • Open the valve switch (do not open counterclockwise too far).
    • Use an external ignition source to ignite the burner.
    • Note: Do not place your head or other parts of your body above the stove when lighting the fire.
  2. Close the Stoves:
    • Close the valve switch, put out the flame, and allow 5 minutes for the stove to cool completely.
    • Unscrew the connecting head of the stove from the gas tank and cover it with the dust cover.
Diagram showing how to ignite and close the BRS-H22 heater.
Instructions for igniting and closing the stove.

Product overview video demonstrating the BRS-H22 heater in use.

Maintenance

  • Keep the stove dry, clean, and avoid corrosion.
  • Discoloration of the support and furnace head is a normal phenomenon during use.
  • Check whether the O-type sealing rubber ring exists and is in good condition in the connection between the valve body and the tank before each use.
  • Keep the connection between the valve body and the tank clean to avoid blocking the airway. After use, cover the dustproof cover to avoid impurities entering the airway and causing blockage.
  • After storage, be sure to separate the stove and gas tank.
  • Always unscrew the gas tank from the stove before storage and store in a well-ventilated area.

Troubleshooting

  • Gas Leakage: If you detect a gas smell (like onion) before or during operation, immediately turn off the gas supply, disconnect the tank, and do not attempt to ignite or continue using the stove. Check all connections for proper sealing.
  • Discoloration: Discoloration of the support and furnace head is normal due to high temperatures during operation and does not indicate a malfunction.
  • Ignition Issues: Ensure the gas tank is properly connected and has sufficient fuel. Verify the valve switch is open. Use a reliable external ignition source.

Specifications

BRS-H22 Owl Double Heating Furnace Specifications
Attribute Detail
Name BRS-H22 Owl Double Heating Furnace
Dimensions 215 x 200 x 125 mm
Power 1050W
Gas Consumption 63g/h
Weight 480g
Material High temperature resistant stainless steel, aluminum alloy, copper alloy
Fuel Type Butane gas, Propane gas
Type Gas Stove
Ignition Device Included
Disposable No
Origin Mainland China
Table of detailed specifications for the BRS-H22 Owl Double Heating Furnace.
Detailed specifications of the BRS-H22 heater.

Key Features

  • Stainless Steel Protective Mesh Cover: Prevents direct contact burns and protects the stove head from damage.
  • Dual High-Efficiency Heating Head: Provides instant and rapid heating, reaching approximately 45°C.
  • All-Aluminum Reflector: Gathers heat, increases project distance, enhances thermal efficiency, and features a windproof design.
  • Convenient Ignition Port: Designed for easy and safe ignition.
  • Air Intake Hood: Windproof design for more stable heating in windy environments. Durable, foldable, and easy to store.
Diagram highlighting key features of the BRS-H22 heater: protective mesh, heating head, reflector, ignition port, and air intake hood.
Visual breakdown of the BRS-H22's main features.

User Tips

  • Always ensure adequate ventilation when using the heater to prevent carbon monoxide buildup.
  • For enhanced stability, especially on uneven terrain, consider using a BRS-1 13 tank holder.
  • When using in cold weather, ensure your gas tank is suitable for low temperatures to maintain consistent performance.
  • Regularly inspect the O-ring and connections for wear and tear to prevent gas leaks.

Warranty and Support

For warranty registration and troubleshooting, please visit the official BRS website or contact customer support:

  • Hot Line: +86-579-87111023
  • Website: www.brs.net.cn
  • Manufacturer: JHEDENG OUTDOOR PRODUCTS CO LTD, No 6-1, Fengshanzui, Longshan Town, Yongkang City, Zhejiang Province, China.

If you have registered your product for warranty, please log in to the JHEDENG WeChat official account for troubleshooting and warranty services. If your product is not registered, please contact your dealer.

A detailed user manual is also available in PDF format. You can view it here.

© 2027 BRS. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.