GGBEE Motion Sensor Night Light

Contents

GGBEE Motion Sensor LED Night Light

User Instruction Manual

1. Product Overview

The GGBEE Motion Sensor LED Night Light is a versatile, rechargeable lighting solution designed for various indoor spaces. Featuring 12 high-brightness SMD LEDs, a motion sensor, and multiple operating modes, it provides convenient illumination for bedrooms, kitchens, wardrobes, and staircases.

GGBEE Motion Sensor LED Night Light with 12 LEDs and USB-C cable

Figure 1: Product view showing 12 high brightness SMD LEDs and charging cable.

2. Package Contents

  • 1 x GGBEE Motion Sensor LED Night Light
  • 1 x USB Type-C Charging Cable
  • 2 x 3M Adhesive Pads (for optional mounting)

3. Setup and Installation

3.1 Charging the Device

Before first use, fully charge the night light. Use the provided USB Type-C cable to connect the light to a standard USB power source (e.g., wall adapter, power bank, computer USB port).

  • Charging Indicator: A red light indicates the device is charging.
  • Fully Charged Indicator: A blue light indicates the device is fully charged.
Charging status of the night light, red for charging, blue for charged

Figure 2: Charging status indicators.

3.2 Mounting the Light

The night light features magnetic mounting for easy installation and removal. It can be attached to any magnetic surface. For non-magnetic surfaces, use the included 3M adhesive pads to create a magnetic mounting point.

  1. Clean the desired mounting surface to ensure it is dry and free of dust.
  2. Peel off the protective film from one side of the 3M adhesive pad and attach it to the back of the night light (if not already present).
  3. Peel off the protective film from the other side of the 3M adhesive pad and firmly press the light onto the desired surface.
  4. Ensure the light is securely attached before releasing.
Product size and features including easy installation

Figure 3: Product dimensions and key features.

4. Operating Instructions

4.1 Mode Selection

The night light has a modes switch located on the side of the device. Use this switch to select your desired operating mode:

Product features showing 12 LED light beads, motion sensor, and modes switch

Figure 4: Location of the modes switch and motion sensor.

  • OFF: The light is turned off.
  • ON (Always-on mode): The light remains continuously on.
  • AUTO (Motion Sensor Mode): The light will automatically turn on when motion is detected in a dark environment and turn off after approximately 15-20 seconds of no motion.

4.2 Motion Sensor Functionality

In AUTO mode, the integrated motion sensor detects movement within its range:

  • Sensing Distance: 3-5 meters (10-16 feet)
  • Sensing Angle: 120 degrees
  • Auto-off Time: Approximately 15-20 seconds after motion ceases.
Motion sensing range diagram showing 3m distance and 120 degree angle

Figure 5: Motion sensor detection range and angle.

4.3 Light Sensor Functionality

The device includes a built-in photo sensor. In AUTO mode, the light will only activate when motion is detected in a dark or low-light environment. It will not activate in bright surroundings or daylight.

5. Maintenance and Care

  • Cleaning: Wipe the light with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Water Resistance: This product is non-waterproof. Do not use it in environments with heavy humidity, direct water exposure, or extremely low temperatures.
  • Battery Care: Recharge the battery when the light output diminishes. Avoid fully depleting the battery for extended periods to prolong its lifespan.

6. Troubleshooting

  • Light does not turn on in AUTO mode: Check if the environment is too bright. The built-in photo sensor prevents activation in daylight or bright surroundings.
  • Light turns on unexpectedly or stays on: Ensure there are no constant movements within the sensor's range. Check for heat sources or air currents that might trigger the sensor.
  • Two lights interact in AUTO mode: Try not to mount two lights too close to each other, as they may interfere with each other's motion detection in AUTO mode.
  • Light is dim or not working: The battery may be low. Recharge the device fully.

7. Specifications

FeatureSpecification
Model NumberMotion Sensor Night Light
Light Source12 x LED bulbs
Color Temperature3000K (Warm White)
Luminous Flux249-2000 Lumens
Rated Power0.2W
Wattage0-5W
Nominal Voltage3V
Working Voltage3.7V
Power SourceRechargeable Lithium Battery
Battery Capacity400mAh
Charging MethodUSB Type-C
Always-on Mode Usage TimeApprox. 21 hours
Induction Mode Usage TimeApprox. 108 days
Sensing Angle120°
Induction Distance3-5 meters
Auto-off Time15-20 seconds
Body MaterialABS
ShapeRectangle
Product Dimensions12cm (L) x 4.3cm (W) x 1.5cm (H)
CertificationsCE, FCC, ROHS
Is Bulbs IncludedYes
Is Batteries IncludedYes
WaterproofNo

8. Warranty and Support

For warranty information, returns, or technical support, please contact your original seller or refer to the product listing page. Keep your purchase receipt for any warranty claims.

A detailed user manual in PDF format may also be available from the seller.

© 2024 GGBEE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.