Introduction
Thank you for purchasing the Opansten Portable Bluetooth Speaker. This manual provides essential information for the safe and efficient use of your device. Please read all instructions carefully before use and retain this manual for future reference.
This speaker is designed for versatile use, featuring IPX7 waterproofing, LED lights, and a strong suction cup for easy mounting on smooth surfaces. It supports Bluetooth 5.0 for stable wireless audio transmission and includes a built-in microphone for hands-free calling.
Safety & Warnings
Important Safety Information: Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
General Warnings:
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
For Electrical Products:
- Do not expose to water, moisture, or extreme heat.
- Do not disassemble, puncture, or crush the battery.
- Do not dispose of in fire.
- Use only certified chargers and cables to reduce the risk of fire or electric shock.
Storage:
- Store in a cool, dry place.
- Avoid prolonged exposure to direct sunlight or high temperatures.
Setup
1. Unboxing and Initial Inspection
Before first use, remove all protective films from the device. Check the product for any visible damage. If the product appears damaged, do not use it and contact customer support.
2. Charging the Speaker
Connect the Micro USB charging port on the speaker to a certified 5V USB power adapter (sold separately) using the provided charging cable. The LED indicator will show the charging status. A full charge takes approximately 4 hours.
3. Mounting the Speaker
The speaker features a strong suction cup for mounting on smooth, flat surfaces. Ensure the surface is clean and dry before attaching the speaker. Wipe out any water stains on the surface for optimal adhesion.
- Recommended Surfaces: Smooth walls, ceramic tiles, glass.
- Not Recommended: Rough walls.
Operating Instructions
1. Power On/Off
Press and hold the Power switch button (labeled with a power icon) to turn the speaker on or off.
2. Bluetooth Pairing
- Ensure the speaker is powered on and in pairing mode (indicated by a flashing LED).
- On your mobile device, enable Bluetooth and search for available devices.
- Select the speaker (usually named 'BT Speaker' or similar) from the list to pair.
- Once paired, the speaker will indicate a successful connection, and the LED may change to a solid color.
The speaker uses Bluetooth 5.0 for stable transmission up to 10 meters (33 feet).
3. Music Playback Controls
- Play/Pause: Short press the Play/Pause button (center button).
- Next Song: Short press the 'Next' button (right arrow).
- Previous Song: Short press the 'Previous' button (left arrow).
- Increase Volume: Long press the 'Next' button (right arrow).
- Decrease Volume: Long press the 'Previous' button (left arrow).
4. Hands-Free Calling
When a call comes in, press the 'Telephone answering' button (phone icon) to answer. Press it again to end the call. The built-in microphone allows for clear communication.
5. LED Lights
The speaker features colorful LED lights that can flash and change frequency with the rhythm of the music, creating an immersive audio-visual experience.
Maintenance
- Cleaning: Clean the product with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the surface and internal components.
- After Use: Disconnect all cables. Turn off the device and store it in a dry, clean place, away from children and direct sunlight.
- Suction Cup: For best performance, periodically clean the suction cup and the surface it adheres to.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not turn on. | Battery is depleted. | Charge the speaker for at least 4 hours. |
| Cannot pair via Bluetooth. | Speaker is not in pairing mode or too far from device. | Ensure speaker is on and in pairing mode. Move device closer to speaker (within 10m). |
| Poor sound quality/no sound. | Volume too low, device not connected, or interference. | Increase volume on both speaker and connected device. Re-pair Bluetooth. Move away from other electronic devices. |
| Suction cup not holding. | Surface is not smooth, dirty, or wet. | Ensure surface is smooth, clean, and dry. Wipe off any water stains. |
Specifications
| Product Name | Wireless Speaker |
| Material | ABS + Silicone |
| Output Power | 3W |
| Bluetooth Version | 5.0 + EDR (2.4GHz transmission frequency) |
| Transmission Distance | 10 meters (33 feet) |
| Frequency Response | 100Hz - 20KHz |
| Power Supply | DC 5V-100-120mA |
| Battery | 3.7V 400mAh Lithium Battery |
| Charging Time | 4 hours |
| Music Playing Time | 2 hours |
| Waterproof Grade | IPX7 |
| Dimensions (Diameter x Height) | 6cm x 3cm |
| Weight | Approx. 100g |
| Certification | CE |
User Tips
- Initial Charge: Always fully charge the speaker before its first use to ensure optimal battery performance.
- Surface Preparation: For reliable suction, always ensure the mounting surface is smooth, clean, and completely dry. Wiping off any water stains is crucial.
- Sound Experience: Users report clear, full sound with good bass and colorful lighting that enhances the listening experience.
- Bathroom Use: The IPX7 waterproof rating makes it ideal for use in bathrooms, allowing you to enjoy music without worry.
- Stable Connection: The Bluetooth connection is generally smooth and stable, providing uninterrupted audio.
Compliance & Support
Compliance Information:
This product complies with applicable European Union (EU) directives and regulations, including:
- Low Voltage Directive (LVD) 2014/35/EU: Ensures electrical safety.
- Electromagnetic Compatibility (EMC) Directive 2014/30/EU: Confirms the device does not emit or is not significantly affected by electromagnetic disturbance.
- RoHS Directive 2011/65/EU & (EU) 2015/863: Restricts hazardous substances.
- WEEE Directive 2012/19/EU: Governs waste electrical and electronic equipment disposal and recycling.
- Battery Directive 2006/66/EC: Addresses battery waste management and restrictions on heavy metals.
Conformity markings (e.g., CE) are affixed to the product. A Declaration of Conformity (DoC) has been issued and is available upon request from the responsible manufacturer or authorized representative.
Manufacturer Information:
Company Name: Kunming Du Pang Electronic Commerce Co., Ltd.
Address: CN, Yunnan Province, Kuriming City, Xishan District, No. 148 Q, 530112, Area A, Culture Expo Park
Email: 455265833@qq.com
Telephone: 15790575718
EU Authorized Representative:
Company Name: ZHEKAN GmbH
Address: Römeräcker 8, 76297 stutensee, Germany
Email: eken190228@gmail.com
Telephone: eken190228@gmail.com
For further details, you may refer to the official user manual PDF: View User Manual (PDF)