1. Introduction
Thank you for purchasing the lessdot Capybara Pixel Pet Night Light. This product combines the fun of building blocks with the functionality of a customizable night light, offering an educational companion and a decorative piece for any room. Please read this manual carefully before use to ensure proper operation and maintenance.
Figure 1: Capybara Pixel Pet Night Light
2. Package Contents
Please check the package for the following items:
- 1 x Pixel Pet Night Light Unit
- 1 x Banana Block
- 2 x Ear Building Blocks
- 4 x Square Building Blocks
- 1 x USB-C Charging Cable
Figure 2: Included accessories and customizable options
3. Setup
- Initial Activation: Before first use, please plug in the USB-C charging cable to activate the product.
- Assembly: The Pixel Pet Night Light features built-in card slots for secure attachment of the included building blocks (banana, ear, and square blocks). These slots provide precise gaps and tension for easy assembly and disassembly. You can also use other compatible large-piece building blocks to customize your night light.
- Placement: Ensure the night light is placed on a stable, flat surface. Do not place the light on a plane with a tilt angle greater than 6°.
Figure 3: Customizing the night light with building blocks
4. Operating Instructions
4.1. Power & Light Modes
The main control is the Switch Button (located on the front, resembling the Capybara's nose).
- Turn On Warm Light: Press the Switch Button once.
- Switch to RGB Mode: Press the Switch Button a second time.
- Turn Off: Press the Switch Button a third time.
4.2. Stepless Dimming
- Adjust Brightness: In Warm Light Mode, press and hold the Switch Button to adjust the brightness from 10% to 100%.
- Memory Function: The last set brightness level will be saved for subsequent uses in Warm Light Mode.
- Note: Stepless dimming is not available in RGB Mode.
Figure 4: Adjusting brightness via the Switch Button
4.3. 15-Minute Timer
- Activate Timer: In Warm Light Mode, double-click the Switch Button. The light will breathe twice to confirm the timer is set.
- Automatic Shut-off: The light will automatically turn off after 15 minutes.
- Note: The 15-minute timer is not available in RGB Mode.
4.4. RGB Color Selection
- Cycle Colors: In RGB Mode, gently tap the product to cycle through the available colors: Red, Orange, Yellow, Green, Cyan, Blue, Purple.
- Lock Color: Tap lightly to lock the light to a single color.
Figure 5: Seven-color glow in RGB mode
4.5. Charging
Connect the provided USB-C cable to the charging port on the back of the unit and to a suitable USB power source.
- Low Power: The power indicator light will flash.
- Charging: The power indicator light will breathe.
- Full Battery: The power indicator light will be steadily on.
5. Maintenance
- Cleaning: To clean the night light, gently wipe it with a soft, dry cloth. Do not use abrasive cleaners or immerse the unit in water.
- Light Source: The light source of this product is not replaceable. When the light source reaches the end of its life, the entire night light unit should be replaced.
- Storage: Store the night light in a cool, dry place away from direct sunlight and extreme temperatures.
6. Troubleshooting
No specific troubleshooting steps are provided in the product information. If you encounter any issues with your Capybara Pixel Pet Night Light, please try the following:
- Ensure the device is fully charged.
- Verify the USB-C cable and power adapter are functioning correctly.
- Refer to the operating instructions to ensure correct button presses for desired modes.
- If issues persist, please contact customer support.
7. Specifications
| Name | Pixel Pet Night Light |
| Model | BD-NL-34 |
| Weight | 210g |
| Dimensions | 114*96*147mm |
| Materials | HIPS, ABS |
| Color Temperature | 3000K |
| Light Colors | Red, Orange, Yellow, Green, Cyan, Blue, Purple |
| Battery Capacity | 800mAh / 3.7V |
| Output Power | 3W |
| Charging Time | 2 Hours |
| Battery Life | Highlight: 12 Hours; Lowlight: 160 Hours |
| Interface Type | USB-C |
| Standards | GB/T 7000.1-2023, GB/T 7000.204-2023 |
| Luminous Flux | 249-2000 lm |
| Voltage | 3V |
| Wattage | 0-5W |
| Light Source | Incandescent Bulbs |
| Certification | CE, ROHS |
| Power Source | DC, Rechargeable battery |
| Battery Type | LITHIUM ION |
Figure 6: Product Specifications Overview
8. User Tips
- Creative Play: Utilize the compatibility with other building blocks to create unique scenes and environments for your Capybara Pixel Pet Night Light. Experiment with different block combinations to personalize its appearance.
- Mood Lighting: Use the stepless dimming in Warm Light Mode to create a cozy atmosphere, or switch to RGB Mode and cycle through colors for a more dynamic effect.
- Bedtime Routine: The 15-minute timer in Warm Light Mode can be a great addition to a child's bedtime routine, providing a gentle light that automatically turns off.
9. Warranty & Support
9.1. Warranty Information
This product comes with a 12-month warranty from the date of purchase. Customers are entitled to free service at the point of sale within this period. Paid service will be provided after the warranty period expires.
The warranty does not cover the following situations:
- Products not manufactured by our company.
- Damage caused by force majeure events (e.g., earthquake, fire).
- Damage due to human factors, including unauthorized removal, modification of components, improper installation, storage, or use not in accordance with the instructions.
9.2. Manufacturer & Support
Manufacturer: Xiamen Bandian Originality Technology Co., LTD
Address: 3rd Floor, NO.1709-1, Dianqian Community, Huli District, Xiamen, Fujian Province, China
Zip Code: 361006
Website: www.bandian.cc
Telephone: 0592-5082991
Xiamen Bandian Originality Technology Co., LTD reserves all rights for the final explanation of warranty terms.