1. Important Safeguards and Warnings
Thank you for purchasing our products! Please read this manual carefully before operation and keep it for future reference.
1.1 Electrical Safety
- All installation and operation should conform to your local electrical safety codes.
- We assume no liability or responsibility for any fires or electrical shock caused by improper handling or installation.
1.2 Transportation Security
- Heavy stress, violent vibration, or water splash should be avoided during transportation, storage, and installation.
1.3 Installation
- Keep upright. Handle with care.
- Do not apply power to the NVR before completing installation.
- Do not place objects on top of the NVR.
- The NVR should be installed in a cool, dry place away from direct sunlight and inflammable or explosive substances.
- This product should be transported, stored, and operated in an environment ranging from 0°C to 55°C.
- Ensure there is at least 15 cm (6 inches) of space around the device for ventilation.
1.4 Qualified Engineers Needed
- All examination and repair work should be done by qualified service engineers.
- We are not liable for any problems caused by unauthorized modifications or attempted repair.
1.5 Accessories
- Before installation, please open the package and check all components are included. Contact your supplier if anything is broken or missing.
1.6 Lithium Battery
- Improper battery use may result in fire, explosion, or personal injury.
- When replacing the battery, make sure you use the same model (CR2032 Motherboard battery).
2. Setup
2.1 Unpacking Inspection
When you receive the product, please check that all items are present according to the packing list on the reverse of the box.
2.2 HDD Installation
Tools: A cross screwdriver
- Remove the screws from the device and disassemble the cover.
- Install the HDD into the HDD bracket and connect the HDD cable.
- Fix the HDD at the bottom of the chassis.
- Close the cover and assemble the screws to fix the cover.
Note:
- Our equipment will format the HDD once it boots up; please back up any existing HDD data.
- We recommend using surveillance-grade HDDs for long-term, high-volume data reading and writing. Purchase from official channels to ensure quality.
2.3 System Connection
This system is standalone with an embedded Linux Operating System in the NVR. Connect a monitor to the NVR to display the GUI, and plug in a mouse to operate the system.

This diagram illustrates how to connect the NVR to cameras, a router, audio devices, a TV, and a PC. The NVR has multiple POE ports for cameras, an uplink port to the router, HDMI and VGA outputs for display, USB ports for mouse, and a power input. It shows a plug-and-play setup where cameras connect directly to the NVR via Ethernet, eliminating the need for separate power adapters or switches for the cameras.
Connection Notes:
- Do not recommend connecting POE ports to a network switch.
- If using a 48V power supply, first connect the power adapter to the device, then connect the 220V power supply to the adapter.
2.4 Power On
Install the NVR correctly as described above, then connect the power. The NVR LED should light up, and the NVR will boot automatically. The NVR will detect any connected hardware (cameras, monitors, etc.). This process takes about 50 seconds. You will hear a