POMIACAM 15M/30M

Contents

POMIACAM Dual Lens Underwater Fishing Camera

Instruction Manual

1. Safety Information

Please read this section carefully before using the product to ensure safe operation and prevent damage.

  • Camera products can only be used for purposes permissible under applicable laws and regulations.
  • Misuse of this product for any illegal activities is strictly forbidden.
  • Always comply with the applicable laws and regulations in your country or area regarding the use of camera devices.
  • Do not attempt to open or modify the camera or power control box, as this will void the warranty and may cause damage or injury.
  • Ensure all connections are secure and dry before submerging the camera.

2. Package Contents

Please check the package contents upon unboxing. If any items are missing or damaged, contact your retailer.

  • 1 x Dual Lens Underwater Camera
  • 1 x Connection Cable (15m or 30m, depending on model)
  • 1 x Cable Coil
  • 1 x Power Control Box (with 12V 4500MA Lithium Battery)
  • 1 x Charger (AC100-240V DC12.6V 1000MA)
  • 1 x User Manual (PDF, reference: View PDF)

3. Product Overview

3.1 Camera Unit

Close-up of the POMIACAM dual-lens underwater camera, showing both front and side lenses with red infrared LEDs.

Image: Dual-lens camera unit with infrared LEDs.

  • Dual Lens Design: Features two lenses for versatile viewing – one for looking down (vertical) and another for horizontal viewing.
  • High Resolution: Provides clear and detailed images underwater.
  • Night Vision: Equipped with infrared LEDs (8 lamps for 140° view, 12 lamps for 92° view) for excellent visibility in low-light conditions without scaring fish.
  • Waterproof: Professional sealed waterproofing process with an IP68 rating, ensuring deep water resistance.
Diagram showing the dual-lens camera underwater, illustrating the 140-degree downward view with 8 infrared lamps and the 92-degree horizontal view with 12 infrared lamps.

Image: Dual lens functionality and infrared lamp distribution.

3.2 Connection Cable

Image of the super strong cable on a spool, with insets showing the internal tension rope, a caliper measuring the 2.25mm diameter, and a rock hanging from the cable to demonstrate 40kg tension capacity.

Image: Super strong cable features.

  • Material: Turnable glass fiber detection line.
  • Diameter: 2.25MM.
  • Strength: Can bear up to 40 kilograms of tension.
  • Length Options: Available in 15m and 30m variants.

3.3 Power Control Box

Image of the power control box, showing its external power indicator lights and an open view revealing the replaceable 12V 4500MA lithium battery inside.

Image: Power control box with replaceable battery.

  • Battery: 12V 4500MA large capacity lithium battery.
  • Replaceable: Battery can be replaced by the user.
  • Indicator: Features a power indicator to show battery status.

3.4 Product Dimensions

Diagram showing the dimensions of the camera unit: 116mm in length and 42mm in diameter.

Image: Camera unit dimensions.

  • Camera Length: 116mm
  • Camera Diameter: 42mm

4. Setup

4.1 Charging the Battery

Diagram showing the power control box connected to the charger. The power box has battery indicator lights. The charger is a standard wall adapter.

Image: Charging setup.

  1. Ensure the power control box is turned off.
  2. Connect the dedicated charger (12.6V 1000MA) to the charging port on the power control box.
  3. Plug the charger into a standard AC outlet (100-240V).
  4. The battery indicator lights on the power control box will show the charging status. Charge until fully indicated.

4.2 Product Connection

Wiring diagram showing the connection flow: camera connects to cable, cable connects to power control box, and power control box connects to an external display (display not included).

Image: Product connection diagram.

Important: Please connect all components under power-off status.

  1. Connect the camera unit to one end of the connection cable. Ensure the connection is firm and secure.
  2. Connect the other end of the connection cable to the input port on the power control box.
  3. Connect your external display (not included) to the output ports (typically RCA video/audio) on the power control box.
  4. Once all connections are made, you can proceed to power on the system.

5. Operating Instructions

  1. Power On: After connecting all components, press the power button on the power control box to turn on the system.
  2. Monitor Battery: Observe the battery indicator lights on the power control box to keep track of remaining power.
  3. Deploy Camera: Carefully lower the camera into the water to your desired depth and position.
  4. Adjust View: Utilize the dual-lens capability to switch between downward and horizontal views as needed (if your display supports this function or if the camera automatically switches/provides separate feeds).
  5. Night Vision: The infrared LEDs will automatically activate or can be manually controlled (depending on model) in low-light conditions, providing clear visibility without disturbing marine life.
  6. Power Off: When finished, retrieve the camera, ensure it is clean and dry, and press the power button on the power control box to turn off the system.

6. Maintenance

  • Cleaning: After each use, rinse the camera unit and cable with fresh water to remove any salt, dirt, or debris. Wipe all components dry with a soft cloth.
  • Lens Care: Gently clean the camera lenses with a soft, lint-free cloth. Avoid abrasive materials that could scratch the lens.
  • Connector Care: Ensure all connectors are clean and dry before storage. Avoid getting water or dirt into the connection ports.
  • Battery Care: For optimal battery life, fully charge the battery before long-term storage. If storing for extended periods, charge the battery every 3-6 months to prevent deep discharge.
  • Storage: Store the camera system in a cool, dry place, away from direct sunlight and extreme temperatures.

7. Troubleshooting

  • No Image on Display:
    • Check all cable connections between the camera, power control box, and display.
    • Ensure the power control box is turned on and has sufficient battery charge.
    • Verify that your external display is powered on and set to the correct input source (e.g., AV1, AV2).
  • Poor Image Quality:
    • Clean the camera lenses carefully with a soft cloth.
    • Check for any obstructions in front of the camera lenses.
    • Ensure the water clarity is sufficient for clear viewing.
  • Battery Not Charging:
    • Verify that the charger is properly connected to the power control box and the wall outlet.
    • Check if the wall outlet is functional.
    • Ensure the charger itself is not damaged.

8. Specifications

FeatureSpecification
BrandPOMIACAM
Model Number15M/30M
OriginMainland China
CertificationCE
Lens TypeDual Lens
Product UseFish Finder
LED TypeNight-vision (Infrared: 8 lamps 140°, 12 lamps 92°)
FunctionWaterproof (IP68)
Cable Length15m / 30m (selectable)
Cable Diameter2.25MM
Cable Tension Capacity40 kg
Battery12V 4500MA Lithium Battery
ChargerAC100-240V DC12.6V 1000MA
Camera ResolutionHigh Resolution
Camera Focus2.5mm
Camera Picture OutputColor
Camera Dimensions116mm (Length) x 42mm (Diameter)

9. Compliance and Disclaimer

9.1 Disclaimer

⚠️️Camera products can only be used for the purposes permissible under the applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.

© 2023 POMIACAM. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.