Introduction
The SHINEKNOT L10U Series Smart Light Switch offers a modern and intuitive solution for controlling your home lighting. Available in Wi-Fi and Zigbee versions, these switches feature square glass buttons with a premium spray coating, designed to complement various interior styles. They support both manual and smart control via the Smart Life App and voice commands.
Safety Information
WARNING: Installation must be performed by a qualified electrician. Do not install with power connected. Ensure the device is installed in a dry, barrier-free location for optimal performance. Not suitable for damp environments. Suitable for altitudes up to 2000 meters and non-tropical climates.
A 10A Type C circuit breaker (according to IEC 60898-1) must be installed in the fixed wiring for protection of each output and the switch's supply.
Package Contents
- 1 x SHINEKNOT L10U Series Smart Light Switch
- Mounting Screws
- User Manual (this document)
Specifications
| Parameter | Value |
|---|---|
| Size | 86x86mm (EU Standard) / 120x74mm (US/AU/IT Standard) |
| Item No. | L10U-HS1/2/3/4, L10U-HSU1/2/3/4 |
| Weight | 0.3kg |
| Packing Box Size | 102.6mm*141mm*52mm |
| Panel | Premium Spray Coating |
| Color | Luxury Gold / Tech Grey |
| Supported Versions | WiFi version / Zigbee version |
| Bottom Materials | Retardant PC |
| Rated Voltage | AC 100-250V 50/60Hz |
| Rated Load | 200W/gang |
| Load Type | Incandescent lamp, energy saving lamp, fluorescent |
| Wireless Standards | IEEE 802.11b/g/n |
| Frequency Range | 2.405GHz~2.480GHz |
| Receiving Sensitivity | -97dBm@250kbps |
| Operating Temperature | -25 °C to +60 °C |
| Relative Humidity | <95% |
Setup and Installation
General Notes: Installation should be performed by a professional electrician. Ensure power is disconnected before installation.
EU Standard Installation
- Remove the panel with a screwdriver.
- Prepare Wiring:
- Light connects to the "L" terminal.
- Bulb connects to "L1, L2, L3" terminals (distinguish corresponding slots).
- 1-gang switch connects to the "L1" terminal.
- 2-gang switch connects to the "L1, L2" terminals.
- 3-gang switch connects to the "L1, L2, L3" terminals.
- Fix the Switch onto the Wall:
- Put the switch into the switch box in the wall.
- Mount the two side screws.
- Install the glass panel (install from up above).
- Cover the glass front panel onto the switch.
- Turn on electricity; the LED light will flash quickly, indicating standby mode.
US/AU/IT Standard Installation
- Separate the holder from the light switch.
- Prepare Wiring:
- Light connects to the "L" terminal.
- Bulb connects to "L1, L2, L3" terminals (distinguish corresponding slots).
- 1-gang switch connects to the "L1" terminal.
- 2-gang switch connects to the "L1, L2" terminals.
- 3-gang switch connects to the "L1, L2, L3" terminals.
- Fix the Switch onto the Wall:
- Fix the holder on the mount box with a screwdriver.
- Mount the two side screws.
- Put the switch into the mount box.
- Cover the front panel glass onto the switch.
- Turn on electricity; the LED light will flash quickly, indicating standby mode.
General Wiring Diagram
Size Diagram
Operating Instructions
Manual Control
Tap the physical buttons on the switch to manually turn lights on or off. The buttons provide clear tactile feedback.
Smart Life App Control
Download the Smart Life App from your device's app store. Pair your switch with the app to control your lights remotely from anywhere, anytime. Long press on the switch icon in the app to edit its name or settings.
Voice Command
The switch works with Amazon Alexa and Google Home. Once paired with your smart home assistant, you can use voice commands like "Hey Google, turn on the light."
Backlight Color Selection
The buttons support orange or white backlight. The backlight color is selected via a rear DIP switch on the device. No software or app is required for this setting.
Maintenance
To clean the switch, gently wipe the glass panel with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the power is off before cleaning.
Troubleshooting
- Switch not responding: Check wiring connections, ensure power is on, and verify app connectivity.
- LED not flashing during setup: Ensure correct wiring and power supply. The switch needs both neutral and live lines.
- App connectivity issues: Check your Wi-Fi/Zigbee network, ensure the switch is in pairing mode, and try restarting the app or the switch.
- Voice control not working: Verify that the switch is correctly integrated with your Amazon Alexa or Google Home account, and check your internet connection.
User Tips
- For optimal performance, ensure your Wi-Fi or Zigbee network is stable and within range of the switch.
- Consider using the physical buttons for quick, immediate control, while leveraging the app for scheduling and remote access.
- If using multiple switches, label them clearly in the Smart Life App for easier management and identification.
Warranty and Support
For warranty information or technical support, please contact the seller or refer to the official SHINEKNOT website.
A detailed user manual in PDF format is available for download: User manual (PDF)