1. Introduction
Thank you for choosing the ATUOTIN 12V Car Door Warning Atmosphere Light Strip. This product is designed to enhance vehicle safety and aesthetics by providing dynamic lighting effects and clear warning signals when car doors are opened. This manual provides essential information for proper installation, operation, and maintenance of your new LED light strips.
2. Safety Information
- Ensure the vehicle's power is off before attempting any installation or wiring.
- Incorrect wiring can cause damage to the product or vehicle electrical system. If unsure, seek professional assistance.
- Do not modify the product in any way not described in this manual.
- Keep the product away from excessive heat or open flames.
- This product is designed for 12V DC systems only. Do not connect to other voltage sources.
3. Package Contents
Your package should contain the following items:
- 2 x LED Ambient Lamp Strips (120cm each)
- (Note: Installation tools are not included.)
4. Specifications
| Feature | Detail |
|---|---|
| Product Size | 1.2M (120CM / 47.2 inches) length, 1.5MM (0.59 inches) thickness |
| Material | ABS Plastic + LED, Silicone |
| Input Voltage | DC12V |
| Output Power | 7W |
| Applicable Models | General-purpose (SUVs, Sedans, Trucks, RVs, MPVs) |
| LED Type (Transparent) | 2835 LED (108pcs per strip) |
| LED Type (Cream Color) | 5050 LED (54pcs per strip) |
| White Light Mode | Normal Light (for 2835 LED 144 LEDs style) |
| Red Light Mode | Burst flash, streaming light (for 2835 LED 168 LEDs style) |
| Special Features | Fully sealed design, dustproof and waterproof |
For more detailed information, you may refer to the official user manual PDF: View User Manual (PDF)
5. Installation
5.1 Pre-installation Notes
- No specialized installation tools are included with this product. You may need basic automotive wiring tools.
- Wiring is required. The light strips are generally connected to the car door lights.
- If your vehicle does not have existing car door lights, the strips can also be connected to the door lock wire.
- The product is designed to light up when the door is open and remain off when it is closed. Due to this functionality, the installation location is somewhat limited. Ensure the chosen power supply activates only when the door is open.
- These light strips can also be used for applications similar to reading lights, welcome lights, ceiling lights, or rearview mirror lights.
5.2 General Installation Steps
- Prepare the Installation Area: Clean the surface where the LED strip will be attached to ensure proper adhesion.
- Identify Wiring Points: Locate the wiring for your car door lights or the door lock wire. You will need to tap into these wires for power.
- Test Connection: Before permanent installation, temporarily connect the LED strip to the identified power source to ensure it functions correctly (lights up when the door is open, turns off when closed).
- Secure the LED Strip: Once tested, peel off the adhesive backing and carefully attach the LED strip to the desired location on the car door. Ensure it is securely fastened along its entire length.
- Route and Conceal Wiring: Route the wiring neatly and securely, ensuring it does not interfere with door operation or get pinched. Use cable ties or clips if necessary to keep wires tidy and out of sight.
- Final Check: Open and close the car door multiple times to confirm the LED strip operates as expected and the wiring is not obstructed.
6. Operation and Features
The ATUOTIN LED Ambient Lamp Strip offers several key features to enhance your driving experience and safety:
- Dynamic Flowing Effects: Equipped with high-brightness LEDs, the strip produces vibrant flowing light effects that activate automatically when the car door opens. This creates a modern, tech-inspired look and improves nighttime visibility for safer entry and exit.
- Collision Warning for Extra Safety: The integrated strobe flashing light acts as a clear warning strip when the door is open. This alerts approaching vehicles and pedestrians, helping to prevent accidents, especially during nighttime or in poor weather conditions.
- Emergency Strobe Mode: In urgent situations, the strip can switch to an emergency strobe mode to intensify warning signals, further enhancing safety for both drivers and passengers.
- High Transparency Light Guides: Manufactured from premium optical materials, the light strips emit a uniform, soft light without visible granules, ensuring clear illumination day and night without dark spots.
7. Maintenance
- Cleaning: Use a soft, damp cloth to wipe the surface of the LED strips. Avoid abrasive cleaners or solvents that could damage the material.
- Inspection: Periodically check the wiring connections to ensure they are secure and free from corrosion.
- Water Resistance: The product features a fully sealed, dustproof, and waterproof design. However, avoid submerging the product or exposing it to high-pressure water jets directly.
8. Troubleshooting
- Lights not turning on:
- Check all wiring connections to ensure they are secure.
- Verify that the power source (car door light or door lock wire) is providing 12V power when the door is open.
- Inspect the LED strip for any visible damage.
- Lights flickering or dim:
- Ensure a stable 12V power supply.
- Check for loose connections or corrosion at the wiring points.
- Inconsistent color or effects:
- This product has specific light modes depending on the LED type (e.g., red/blue flashing, white constant, red flowing). Refer to the specifications for your specific model.
- If the issue persists, re-check wiring or consult customer support.
9. User Tips
No specific user tips are available at this time.
10. Frequently Asked Questions (FAQ)
No specific FAQs are available at this time.
11. Warranty and Support
For warranty information and customer support, please refer to the seller's policies or contact the retailer where the product was purchased. Keep your proof of purchase for any warranty claims.