Car Accessory for Model Y

Contents

Front Camera Lens Guard for Tesla Model Y

Model: for Model Y

1. Introduction

This manual provides instructions for the installation, operation, and maintenance of your new Front Camera Lens Guard for Tesla Model Y. This protective cover is designed to shield your vehicle's front and rear camera lenses from scratches, stains, and environmental elements, ensuring clear camera vision and prolonging the life of your camera lenses.

Front camera lens guard installed on a Tesla Model Y camera

Image: Front camera lens guard installed on a Tesla Model Y camera, highlighting its seamless integration.

2. Safety Information

Please read and understand the following safety precautions before installation:

  • Install the lens guard only when the vehicle is completely off and stationary.
  • Ensure the lens guard does not obstruct any airbags, the driver's view, or vehicle controls.
  • This product is a protective accessory and is not a replacement for original vehicle lights or safety systems.
  • Keep this product and its packaging out of reach of children.

3. Package Contents

Your package should contain the following items:

  • 2 x Camera Lens Guards (1 Set)
Two camera lens guards included in the set

Image: The two camera lens guards included in the set.

4. Product Features

The camera lens guard offers advanced protection with its multi-layered design:

  • Impact-Resistant: Provides effective protection against physical impacts.
  • Scratch-Resistant: Shields the camera lens from scratches.
  • Anti-Stain: Helps prevent smudges and dirt accumulation.
  • Multi-Layer Coating: Features anti-fog, anti-scratch, and anti-reflective layers for optimal clarity.
  • All-Weather Protection: Designed to withstand sun, rain, and various environmental conditions.
  • Precision Fit: Utilizes invisible car wrap-grade material with 1:1 moulding based on original vehicle data for a seamless, gap-free fit.
Durability test showing impact and scratch resistance of the lens guard

Image: Durability tests demonstrating the impact and scratch resistance of the lens guard.

Diagram illustrating the multi-layer structure of the lens guard

Image: Diagram illustrating the anti-fog, anti-scratch, protective, and anti-reflective layers of the lens guard.

5. Installation Guide

Follow these steps to install the camera lens guard:

  1. Prepare the Surface: Ensure the camera lens area on your Tesla Model Y is clean, dry, and free from dust or debris. Use a microfiber cloth for best results.
  2. Align the Guard: Carefully peel off the adhesive backing from the lens guard. Align the guard precisely over the camera lens. The 1:1 moulding ensures a perfect fit.
  3. Apply the Guard: Gently press the lens guard onto the camera, starting from one edge and working your way across to ensure no air bubbles are trapped. Apply firm, even pressure for secure bonding.
  4. Verify Installation: Check that the lens guard is securely attached and does not interfere with the camera's field of view or functionality.
Hand applying the lens guard to a car camera

Image: A hand demonstrating the application of the lens guard to a car camera.

Before and after installation comparison of the camera lens guard

Image: A visual comparison showing the camera lens before and after the protective guard installation.

Image highlighting concealed bonding and precision fit of the lens guard

Image: Close-up view emphasizing the concealed bonding and precision fit achieved with the lens guard.

6. Operation

The camera lens guard operates passively. Once installed, it continuously provides protection to your vehicle's camera lenses without requiring any user interaction. Its specialized coatings work to maintain clear vision and prevent damage from external factors.

Rear camera with lens guard, showing all-weather protection

Image: The lens guard providing all-weather protection to a rear camera, capable of withstanding sun and rain.

7. Maintenance and Care

To ensure the longevity and effectiveness of your lens guard:

  • Clean the surface of the lens guard regularly with a soft, damp cloth.
  • Avoid using abrasive cleaners or harsh chemicals, as these may damage the coatings.
  • If the lens guard becomes excessively dirty, a mild soap solution can be used, followed by rinsing with clean water and drying with a soft cloth.

8. Troubleshooting

If you experience any issues with your lens guard:

  • Reduced Clarity: Ensure the lens guard is clean and free from smudges or dirt. If the issue persists, check for proper installation and ensure no air bubbles are present.
  • Loose Fit: If the lens guard becomes loose, it may need to be re-adhered or replaced. Ensure the surface is clean and dry before re-application.

9. Specifications

Feature Detail
Model Name for Model Y
Item Weight 15g
Product Dimensions (each) 11cm (width) x 15cm (height)
Package Weight 0.04 kg
Package Dimensions 15cm (length) x 11cm (width) x 2cm (height)
Material Invisible car wrap-grade material
Coatings Anti-fog, Anti-scratch, Protective layer, Anti-reflective
Origin Mainland China
Product size diagram showing 11cm width and 15cm height

Image: Diagram illustrating the product dimensions (11cm width, 15cm height).

10. Warranty and Support

For support or warranty inquiries, please contact the manufacturer:

  • Manufacturer: Zhengzhou Shruo Network Technology Co., Ltd.
  • Country: China
  • Address: Room 1413, Meisheng Center, 33 Jinshui East Road, Zhengzhou District (Zhengdong), Free Trade Experimental Zone, 410188, Henan Province, CN
  • Phone Number: 86-17596499661

This product complies with EU RoHS and REACH environmental directives, and meets LVD 2014/35/EU low-voltage electrical regulations and EMC 2014/30/EU electromagnetic compatibility regulations, making it suitable for use in the EU market.

A detailed user manual (PDF) is available for reference at https://manuals.plus/m/27d2f28e836e61dcb8de093ae07e2e58b1c1e58e32b5545603158034aa87082d.

11. User Tips

No specific user tips are available at this time. For optimal performance, ensure the camera lens and the guard are kept clean and free from obstructions.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.