1. Introduction
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Jaxcam 10X Zoom 4K 8MP Dual Lens PTZ Solar Wireless Camera. Please read this guide carefully before using the product and retain it for future reference.
The Jaxcam 2K solar-powered low-power consumption camera offers high-definition surveillance with advanced features such as 10X hybrid zoom, remote active wake-up, two-way audio, PIR detection, intelligent alarm push, and continuous power supply via a 3.5W solar panel. It supports free cloud storage for 7-day alarm recordings and offers full-color day and night vision.
2. Setup Instructions
2.1. APP Download and Registration (O-KAM)
The camera operates with the O-KAM application. Follow these steps to get started:
- Search for "O-KAM" in your device's App Store (iOS) or Google Play Store (Android), or scan the QR code provided in the product packaging to download the app.
- Open the O-KAM app and click "Register now". Follow the on-screen prompts to create and register your account.
2.2. Pre-Setup
- Powering the Camera:
- For products with built-in batteries, ensure the power switch is in the "ON" position.
- For products without batteries, connect the camera to the power adapter supplied with the product.
- Placement for Connection: When connecting to the internet, place the camera within 2 meters of your Wi-Fi router.
- Wi-Fi Connection: Connect your mobile phone to the 2.4GHz Wi-Fi network and ensure you know the exact Wi-Fi password. Note that 5GHz networks are not supported.
2.3. Adding Devices to the APP
There are two methods to add your camera to the O-KAM app:
Method 1: Scan QR Code to Add Camera
- In the O-KAM app, click "Add" and then either scan the QR code located on the camera or directly select "Wireless camera".
- Power on the camera and restore its factory settings if necessary.
- Confirm the 2.4GHz Wi-Fi network you wish to connect to and enter the correct password.
- Point the camera lens at the QR code generated by the app. Keep it steady until the camera emits a beep sound or the blue indicator light flashes quickly.
- Once the camera successfully connects to the internet, click "Get started" in the app.
Method 2: AP Connection
- In the O-KAM app, click the icon in the upper right corner of the page and select "Hotspot configuration".
- Click "To connect".
- Go to your mobile phone's network settings. Select the Wi-Fi signal that begins with "@OK-" and connect to it.
- Return to the O-KAM app. Once the device is successfully added, click "Settings".
- Click "Device Settings".
- Click "Wi-Fi network".
- Select the desired Wi-Fi signal, enter the correct password, and click "Confirm".
3. Operation
3.1. Power Management
The camera features a built-in recyclable rechargeable battery and is optimized for ultra-low power consumption. It supports continuous power supply through its 3.5W solar charging panel, ensuring long-term standby and operation.
3.2. Video Monitoring and Zoom
The camera offers 8MP 4K HD resolution, meaning each of the two lenses provides 4MP, combining for a total of 8MP. You can achieve 10X hybrid zoom (4MM+12MM) through the mobile APP to view clearer and more detailed images.
3.3. PTZ Control
The camera's dome can be remotely controlled and rotated via the O-KAM app. It supports 355° pan and 90° tilt, allowing you to cover a wide area.
3.4. Two-Way Audio
Equipped with a built-in microphone and speaker, the camera enables two-way audio communication. You can speak to visitors or deter intruders remotely through your smartphone.
3.5. Intelligent Detection and Alarms
The camera features PIR detection, human detection, motion detection, and sound detection. The camera lens will automatically track human movement, and you will receive prompt alert messages. You can enable alarm voice and automatic lighting in the app settings to warn intruders.
3.6. Night Vision Modes
The camera automatically switches between infrared and full-color night vision modes to provide optimal visibility in low-light conditions. You can also manually adjust these settings within the O-KAM app.
3.7. Storage Options
The camera supports local backup via a TF card (up to 128GB, not included). Additionally, cloud storage service is available (may require an extra subscription fee).
3.8. Remote Access and Sharing
With the O-KAM mobile app, you can easily access and remotely control the camera, view live video, and receive alarm notifications at any time. The camera also supports multi-user viewing, allowing you to share access with family or friends.
4. Maintenance
To ensure optimal performance and longevity of your camera, follow these maintenance guidelines:
- Cleaning: Regularly clean the camera lens and solar panel with a soft, damp cloth to remove dust, dirt, and debris. Avoid using harsh chemicals that could damage the surfaces.
- Battery Health: While the solar panel provides continuous charging, ensure the camera receives adequate sunlight. In prolonged periods of low sunlight, consider manually charging the battery if possible, or ensure the camera is placed in an area with sufficient light exposure.
- Firmware Updates: Check the O-KAM app periodically for any available firmware updates for your camera. Keeping the firmware updated ensures you have the latest features and security enhancements.
- Environmental Protection: The camera has an IP66 waterproof and dustproof rating, making it suitable for various outdoor environments. However, avoid submerging the camera in water or exposing it to extreme physical impacts.
5. Troubleshooting
If you encounter issues with your camera, try the following steps:
- Camera Not Connecting to Wi-Fi:
- Ensure your Wi-Fi network is 2.4GHz, as 5GHz is not supported.
- Verify that the Wi-Fi password entered is correct.
- Place the camera within 2 meters of the router during the initial setup.
- Try restarting your router and the camera.
- Camera Not Powering On:
- Check if the battery switch is in the "ON" position (for battery models).
- Ensure the power adapter is securely connected (for non-battery models).
- Verify that the solar panel is receiving sufficient sunlight to charge the battery.
- Poor Video Quality:
- Check your Wi-Fi signal strength. A weak signal can affect video quality.
- Ensure the camera lens is clean and free from obstructions.
- Interference with Other Devices (FCC Compliance):
This equipment generates and uses radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. If interference occurs, try these measures:
- Reorient or reposition the receiving antenna.
- Increase the distance between the camera and the affected receiver.
- Connect the camera to an outlet on a circuit different from that to which the receiver is connected.
- Consult a dealer or an experienced radio/TV technician for assistance.
6. Specifications
| Feature | Specification |
|---|---|
| APP | O-KAM |
| Resolution | 8MP (Dual Lens: 4MP + 4MP) |
| Lens (mm) | 3.6mm (fixed) + 12mm (zoom) |
| Optical Zoom | 10X Hybrid Zoom |
| PTZ Control | Pan 355°, Tilt 90° |
| Connectivity | WiFi (2.4GHz only) |
| Two-Way Audio | Supported |
| Auto Tracking | Supported (Human Detection) |
| Night Vision | Full Color Night Vision, IR Night Vision |
| Weatherproof Rating | IP66 (Outdoor Waterproof) |
| Power Supply | 2x 21700 (10000mAh) Rechargeable Battery, 3.5W Solar Charging Panel |
| Storage Options | Up to 128GB TF Card, Cloud Storage (subscription may be required) |
| P2P Remote Access | Supported |
| Working Temperature | -35°C ~ 55°C (-31°F ~ 131°F) |
| Supported OS (App) | Windows 10 (for desktop app), iOS, Android |
7. User Tips
Based on general usage and product features, here are some tips for an optimal experience:
- Optimal Solar Charging: Position the solar panel in an area that receives direct sunlight for most of the day to ensure continuous power. Adjust its angle seasonally if needed.
- Wi-Fi Signal Strength: For outdoor installations, ensure your Wi-Fi signal extends reliably to the camera's location. Consider a Wi-Fi extender if the signal is weak.
- Regular App Checks: Periodically open the O-KAM app to check camera status, battery level, and review recorded events.
- Cloud Storage Consideration: If continuous recording or longer retention of footage is critical, consider subscribing to the cloud storage service.
- Alarm Customization: Customize the intelligent detection settings (human detection, motion detection) and alarm actions (siren, spotlight) in the app to suit your specific security needs and avoid false alarms.
8. Warranty and Support
The product comes with a 3-year warranty covering defects in workmanship and materials from the original purchase date. This warranty ensures that the product will be repaired or replaced for parts or the entire unit if it fails due to manufacturing defects.
For technical support, troubleshooting assistance, or warranty claims, please refer to the contact information provided by your retailer or the official Jaxcam support channels. You can also consult the O-KAM app for additional resources and settings.
Disclaimer: Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.