1. Introduction
The SC8108 Network Cable Tester is a versatile tool designed for efficient and accurate testing of various network cables. It helps identify wiring errors, measure cable length, and locate breakage points in Cat5, Cat6, 5e, and 6e cables. Its portable design and user-friendly interface make it an essential device for network professionals and DIY enthusiasts.

2. Package Contents
Ensure all items are present in the package:
- 1 x Network Cable Tester (Main Unit)
- 1 x Far-end test jack (Remote Unit, ID1)
- 1 x English Instruction booklet

3. Specifications
| Feature | Detail |
|---|---|
| Model | SC8108 |
| Type | Cable Tester |
| Overall Dimension (Main Tester) | 180 x 80 x 40mm |
| Overall Dimension (Remote Identifier) | 77 x 31 x 21mm |
| Power Supply | Main tester uses 6V DC (4 x 1.5V AA batteries, not included) |
| Display | Special 4 x 16 character big screen LCD lattice (visual field 61.6 x 25.2mm) |
| Type of Cable Tested | STP / UTP twin twisted cable, coaxial cable, telephone line |
| Working Ambient Temperature | -10~60°C |
| Tester Ports | RJ45 master port (M), RJ45 LOOPBACK port (L) |
| Remote Identifier Port | RJ45 port (R) |
| Length Measurement Scope | 1~305 M (3~1000 ft) |
| Calibration Accuracy | 3% (±0.5M or ±1.5ft) (calibrating cable >10M) |
| Shipment Accuracy | 5% (±0.5M or ±1.5ft) (AMP, AT&T Class 5 cable) |
| Certification | CE, FCC, RoHS |
| Battery Included | No |

4. Setup
4.1. Battery Installation
- Locate the battery compartment on the back of the main tester unit.
- Open the battery compartment cover.
- Insert four (4) 1.5V AA batteries, ensuring correct polarity.
- Close the battery compartment cover securely.

4.2. Connecting Cables for Testing
- Identify the RJ45 MAIN port on the main tester unit and the RJ45 port on the WIREMAP remote unit.
- For continuity and wiring error checks, connect one end of the network cable to the MAIN port of the tester and the other end to the WIREMAP remote unit.
- For length measurement, connect one end of the cable to the MAIN port and leave the other end unconnected or connected to the remote unit.
- For coaxial or telephone line testing, use the appropriate adapters (not included) and connect to the designated ports if available, or use the RJ45 ports with suitable adapters.

5. Operating Instructions
5.1. Power On/Off
- Press the green power switch to turn the device on.
- The device features an automatic time-delay shut-off to conserve battery life.
5.2. Menu Navigation
Use the function keys (up/down arrows) to navigate through the menu options displayed on the LCD screen. The confirmation/return key (usually the middle button) is used to select an option or confirm an action.
Video 1: Demonstration of SC8108 menu navigation and basic cable testing.
5.3. Wire Map Test
- Connect the network cable to be tested between the main unit's MAIN port and the remote unit's RJ45 port.
- Turn on the tester.
- Navigate to "1. WireMap" using the function keys and press the confirmation key.
- The tester will display "Remote Found" if the remote unit is connected.
- The screen will then show the wiring sequence (R: Remote, M: Main) and indicate "PASS" or identify any errors like open circuit, short circuit, jumper wire, reverse connection, or cross-talk interference.
5.4. Pair & Length Measurement
- Connect one end of the network cable to the main unit's MAIN port. The other end can be left open or connected to the remote unit.
- Navigate to "2. Pair&Length" and press the confirmation key.
- The tester will measure the cable length and display it in meters or feet.
- It can also determine the distance to a breakage point or short circuit.
Note: For accurate length measurement, ensure the cable is calibrated. The device supports dynamic calibration for up to 97% accuracy.
5.5. Coaxial/Telephone Line Test
- Connect the coaxial or telephone line to the appropriate port (or via an adapter to the RJ45 port).
- Navigate to "3. Coax/Tel" and press the confirmation key.
- The tester will perform continuity and wiring checks specific to these cable types.
5.6. Setup
The "4. Setup" menu allows you to configure various settings, such as units of measurement (M/ft) and calibration for cable length. Refer to the on-screen prompts for detailed setup options.
6. Maintenance
- Keep the device clean and free from dust and moisture. Use a soft, dry cloth for cleaning.
- Store the tester in a cool, dry place when not in use.
- Remove batteries if the device will not be used for an extended period to prevent leakage.
- The device features a self-checking function and automatically compensates for changes in battery capacity or ambient temperature, ensuring consistent performance.
7. Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| No display when powered on | Check battery installation and ensure batteries have sufficient charge. Replace if necessary. |
| "Remote Found" not displayed | Ensure the remote unit is securely connected to the other end of the cable. Check the cable for damage. |
| Inaccurate length measurement | Perform a calibration using a known length of cable (greater than 10M). Ensure cable type is correctly selected if applicable. |
| Wiring errors detected (Open, Short, etc.) | Inspect the cable connectors and the cable itself for physical damage. Re-crimp connectors if needed. |
| Device shuts off unexpectedly | This is likely the automatic time-delay shut-off feature. If it happens too quickly, check battery level. |
8. User Tips
- Always ensure a firm connection between the cable and the tester ports for accurate results.
- For critical length measurements, calibrate the device regularly with a known good cable.
- When testing long cables, it's helpful to have the remote unit accessible or use a second person to connect it.
- Keep the LCD screen clean for clear readability of test results.
9. Support and Services
For technical specifications, user guides, and more information, please visit the product page or service page on the manufacturer's website. You can usually find the product name and model on the product label.
Online Resources:
- Official Website: www.tendacn.com/service/default.html
- User Manual (PDF): View PDF Manual (Note: This PDF may be a generic manual. Refer to the included English Instruction booklet for specific details.)
