Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Zigbee 3.0 Smart Water Leakage Sensor. This device is designed to detect water leaks and high water levels in various locations, providing instant alerts through your smart home system. It requires a Zigbee gateway to function.
Safety Information
- Read all instructions carefully before use and keep this manual for future reference.
- Do not attempt to repair or modify the device yourself.
- Use only the specified battery types (LR03).
- Keep the device away from extreme temperatures and high humidity.
- Ensure the sensor is installed in a location where it will not be accidentally damaged or tampered with.
Package Contents
Please check the box for the following items:
- Water Leakage Detector & Probe x 1
- User Manual x 1
- Double-sided tape x 1
- Accessory package x 1 (includes pin, screws, wall anchors)
Specifications
| Attribute | Value |
|---|---|
| Model Number | Water Leakage Sensor |
| Product Type | Zigbee Smart Water Level Detector (EasyLink) |
| Smart Home Platform | Tuya |
| Certification | CE |
| Origin | Mainland China |
| Voltage | DC3V |
| Low Voltage Indication | ≤2.5V |
| Static Current | ≤10uA |
| Alarm Current | ≤15mA |
| ZIGBEE Frequency | 2.400GHz - 2.484GHz (requires a gateway) |
| Operating Temperature | 10~+50°C |
| Operating Humidity | Maximum 95%RH |
| Scope of Use | Kitchen, bathroom, basement, laundry room, etc. |
| Product Size | 69mm x 24mm x 16mm |
Setup
1. Battery Installation
- Push the mounting bracket upwards and pull it outwards to open the device.
- Install two LR03 batteries into the battery compartment, ensuring correct polarity as indicated by the diagram inside the compartment.
- Close the device. The indicator light will illuminate briefly and then turn off.
2. App Installation and Gateway Connection
This Zigbee sensor requires a Zigbee gateway to function. Download the 'Tuya Smart' APP (or 'eWeLink' as mentioned in some documentation) from your app store. Register and log in to the app.
In the app, navigate to the 'Home' interface, click '+' or the center '+' to 'Add Device'. Select 'Quick Add' and follow the prompts to add a device. Enter your WiFi password. The app will automatically search for devices. Once found, click to add the gateway (ensure the gateway is in pairing mode).
3. Pairing the Water Leakage Sensor
- After successfully adding the gateway, click 'Add Sub-device' in the app.
- Use the provided pin to press and hold the reset button on the sensor for 3 seconds until the indicator light flashes rapidly.
- The app will search for the device for approximately 30 seconds. Once found, add it to your device list. The water immersion indicator light will turn off upon successful pairing.
4. Installation
The sensor can be installed using the provided double-sided tape. Choose a flat, clean surface in the desired detection area (e.g., kitchen, bathroom, basement, laundry room). Ensure the probe is positioned where water is likely to accumulate first.
Operating Instructions
Water Detection and Alerts
When the sensor's probe detects water, it will immediately trigger an alarm. An instant notification will be pushed to your connected mobile app. The app will display a 'Leaking' status.
App Notifications
To ensure you receive timely alerts, enable push notifications for the water leakage sensor within the device settings in the Tuya Smart app. You can also review the history record of detections in the app.
Smart Scene Linkage
The sensor supports smart scene linkage with other Tuya-compatible smart devices. For example, you can configure it to automatically close a smart water valve or activate a drainage pump upon water detection, enhancing your home's automation and safety.
Maintenance
Battery Replacement
The device features a low battery reminder. When the battery voltage drops below 2.5V, the app will notify you to replace the batteries. To replace, open the sensor cover as described in the 'Battery Installation' section and insert two new LR03 batteries. The sensor is designed for energy saving, with a standby time of up to 8 months.
Cleaning
Wipe the sensor and probe with a dry, soft cloth as needed to ensure optimal performance. Do not use abrasive cleaners or immerse the main unit in water.
Troubleshooting
Device not connecting to gateway
- Ensure the Zigbee gateway is powered on and connected to the internet.
- Verify the sensor batteries are correctly installed and not depleted.
- Re-initiate the pairing process by pressing the reset button on the sensor and adding it via the app.
- Ensure the sensor is within the effective range of the Zigbee gateway.
No alerts received
- Check if app notifications are enabled for the sensor in the device settings within the Tuya Smart app.
- Ensure your smartphone has an active internet connection and notifications are enabled for the Tuya Smart app.
- Verify the sensor is within range of the Zigbee gateway.
False alarms
- Ensure the sensor probe is placed on a dry, stable surface.
- Avoid placing it in areas with high humidity or condensation that could trigger false alarms.
- Clean the probe contacts if they appear dirty or corroded.
User Tips
- Consider placing sensors in critical areas like under sinks, near water heaters, washing machines, dishwashers, and in basements or utility rooms.
- Regularly check the battery status through the app to ensure continuous protection.
- Test the sensor periodically (e.g., monthly) by placing the probe in a small amount of water to confirm it triggers an alert and sends a notification to your phone.
- Integrate the sensor into smart home routines to automatically take action when a leak is detected, such as turning off a smart water valve.
Warranty and Support
For technical support, warranty claims, or further assistance, please contact the seller or refer to the official Tuya Smart app support resources. Keep your purchase receipt for warranty purposes.