1. Introduction
Thank you for choosing the Baofeng Mini-5 Walkie-Talkie. This device is a compact, high-power, multi-band two-way radio designed for reliable communication in various outdoor and professional settings. Featuring Type-C charging, Bluetooth APP programming, and NOAA weather radio capabilities, the Mini-5 offers advanced functionality in a portable design.
2. Safety Information
- Do not operate the radio in explosive atmospheres (e.g., around flammable gas, dust, or fumes).
- Do not hold the radio antenna in your hand during transmission, as this may reduce performance and cause burns.
- Do not use unauthorized accessories, as this may damage the radio or void the warranty.
- Keep the radio away from medical devices to avoid interference.
- Do not expose the battery to fire or extreme heat.
- Avoid listening at high volume levels for extended periods to prevent hearing damage.
3. Package Contents
Please check the package contents carefully. If any item is missing or damaged, contact your dealer.
| Item | Quantity |
|---|---|
| Radio Unit | 1 |
| Battery | 1 |
| Antenna | 1 |
| Belt Clip | 1 |
| Power Adapter | 1 |
| Lanyard | 1 |
| Operation Manual | 1 |
Note: Charger and power adapter specifications may vary by dealer. Type-C charging instructions are applicable.
4. Product Overview
Familiarize yourself with the radio's components:

Figure 4.1: Baofeng Mini-5 Front View and Key Features
This image displays the Baofeng Mini-5 walkie-talkie in hand, highlighting its compact size. Key features shown include: Wireless Copy Frequency, 999 Channels, Type-C Charging, and Multi-Band capabilities (FM 65-108MHz RX, AM 108-136MHz RX, 136-174MHz RX/TX, 350-390MHz RX, 400-480MHz RX/TX, 480-520MHz RX).
Radio Components
- Antenna
- SK1-Customized Function Key/Monitor button
- PTT-A Button (Push-To-Talk for Channel A)
- A/B Button (Band Switch)
- Menu button
- PTT-B Button (Push-To-Talk for Channel B)
- Numeric Keypad/Speaker
- Flashlight
- Volume/Power Knob
- Screen (LCD Display)
- Accessory Port (for headset)
- Exit button
- ▲ Up button/▼ Down button
- Flashlight/Search button
- Microphone
- LED Indicator
- Battery Latch
- Type-C Charging indicator light
- Type-C Charging Port
- V/M-VFO/MR button (Mode Switch)
- Belt Clip
LCD Display Icons
| Icon | Description |
|---|---|
| RSSI | Squelch Open/Close Indicator |
| H/L | Transmit power level indicator (High/Low) |
| ♪ | DTMF side tone enabled |
| D | DCS enabled |
| C | CTCSS enabled |
| + / - | Repeater offset (TX higher/lower than RX) |
| D | Dual watch enabled |
| 🔒 | Keypad lock enabled |
| VOX | VOX enabled |
| N | Narrowband enabled |
| 🔋 | Battery level indicator |
| R | Reverse function enabled |
| T | Terminal in transit mode (pass-through) |
| SCR | Voice scramble function activated |
5. Setup
5.1 Attaching the Antenna
Screw the antenna clockwise onto the connector on top of the radio until it is tight. To remove, turn counter-clockwise. Do not overtighten. Avoid holding the antenna during transmission.
5.2 Charging the Battery
The Baofeng Mini-5 features a universal Type-C charging port, allowing convenient charging from various sources.

Figure 5.1: Type-C Charging Options
This image illustrates the versatility of the Type-C charging port on the Baofeng Mini-5. It shows the radio being charged via a car charger, a power bank, and a computer USB port, highlighting its compatibility with common charging methods.
- Connect the Type-C cable to the radio's charging port.
- Connect the other end of the cable to a compatible USB power source (e.g., car charger, power bank, computer, or wall adapter).
- The Type-C Charging indicator light (18) will illuminate red during charging.
- When charging is complete, the indicator light will turn green.
Note: It is recommended to turn off the radio during charging.
5.3 Power On/Off
To turn ON: Rotate the Volume/Power Knob (9) clockwise until you hear a click.
To turn OFF: Rotate the Volume/Power Knob (9) counter-clockwise until you hear a click.
5.4 Volume Adjustment
To increase volume: Rotate the Volume/Power Knob (9) clockwise.
To decrease volume: Rotate the Volume/Power Knob (9) counter-clockwise.
5.5 Keypad Lock/Unlock
To prevent accidental changes to radio settings:
- To Lock: Press and hold the * key until the 🔒 icon appears on the screen.
- To Unlock: Press and hold the * key again until the 🔒 icon disappears.
5.6 Wireless Programming (APP)
The Baofeng Mini-5 supports wireless programming via a smartphone app (OLA Radio) using Bluetooth. This eliminates the need for a computer or programming cable.

Figure 5.2: APP Programming
This image shows the Baofeng Mini-5 walkie-talkie connected wirelessly via Bluetooth to a smartphone running the programming app. This illustrates the convenience of adjusting frequencies and settings directly from a mobile device.
- Download App: Scan the QR codes below or search for 'OLA Radio' in your app store.
Android App
iOS App
- Enable Wireless CPS: On the radio, press MENU then 4 to enter Wireless CPS. Press MENU again, then use ▲/▼ to select 'On'. The 📶 icon will appear on the screen.
- Connect to App: Open the OLA Radio app on your smartphone. Enable Bluetooth and location services. Select the '5Rmini Series' model. The app will connect to your radio.
- Read/Write Data: You can read the radio's current settings, modify channels, frequencies, and other parameters within the app, then write the new configuration back to the radio. The radio will restart after writing.
6. Operating Instructions
6.1 Keypad Entry
Use the numeric keypad to enter frequencies, channel numbers, or menu options.
6.2 Channel Selection
Press the V/M button to switch between VFO (Frequency) mode and MR (Channel) mode. In MR mode, use the ▲/▼ buttons or the rotary encoder to select the desired channel. You can also directly enter a 3-digit channel number (e.g., 064 for channel 64).
6.3 Channel Memory and Deletion
To Store: In VFO mode, set your desired frequency and parameters (CTCSS/DCS, offset). Press MENU then 3, then MENU, then 1, then 5 (MEMCH). Press MENU to enter, use ▲/▼ to select an empty channel slot, then press MENU again to save. Press EXIT to return.
To Delete: In MR mode, press MENU then 3, then MENU, then 1, then 6 (DELCH). Press MENU to enter, use ▲/▼ to select the channel to delete, then press MENU to confirm. (Channel 1 cannot be deleted).
6.4 Main Band/Sub Band Switch
Press the A/B button to switch between the main (highlighted) and sub (darker) bands on the display.
6.5 Setting VFO Frequency
In VFO mode, use the keypad to directly enter the frequency, or use the ▲/▼ buttons/rotary encoder to adjust the frequency in steps.
6.6 Making and Receiving Calls
Ensure all radios are on the same channel and sub-code. Hold the radio 2.5-5 cm from your mouth.
To Transmit: Press and hold the PTT-A (for main band) or PTT-B (for sub band) button. The LED indicator will turn red. Speak clearly into the microphone. Release PTT to receive.
To Receive: The radio is in receive mode when PTT is not pressed. The LED indicator will turn green when a signal is received.
6.7 Emergency Alarm
Press the pre-programmed SOS shortcut key to activate or deactivate the emergency alarm function.
6.8 Flashlight
Press the pre-programmed LAMP shortcut key (or the dedicated flashlight button) to turn the LED flashlight on or off.

Figure 6.1: LED Flashlight
This image shows the Baofeng Mini-5 walkie-talkie with its integrated LED flashlight activated, demonstrating its utility in low-light conditions.
6.9 FM Radio
Set SK1 to FM Radio function. Press the SK1 key to enter/exit FM radio mode. Use ▲/▼ to scan frequencies, or #1 to auto-search. Press EXIT to switch frequency bands (65.0/75.0MHz).
6.10 Monitor Function
Press and hold the pre-programmed Monitor key to listen to weak signals on the current channel or adjust volume without receiving a signal. Release to exit.
6.11 Frequency Search (Scan)
Press the pre-programmed SEARCH shortcut key to enter frequency search mode. Press #2 to switch search bands (VHF/UHF). Press MENU to save found channels.
6.12 Reverse Frequency
In repeater mode, short press * to invert receive and transmit frequencies (R icon displayed). Useful when RX/TX frequencies differ.
6.13 Talk Around
In repeater mode, press * to switch between Talkaround (T icon) and Repeater (R icon) modes. In Talkaround, RX frequency equals TX frequency.
6.14 Repeater Activation Tone
Press and hold PTT, then press SK1 to transmit a 1750Hz tone to activate a repeater.
6.15 Voice-Activated Transmit (VOX)
VOX allows hands-free transmission. To enable/disable: Press MENU then 2, then MENU, then 4 (Vox Switch). To adjust sensitivity: Press MENU then 2, then MENU, then 5 (Vox Level), then use ▲/▼ to select level 1-9 (1=most sensitive). Press MENU to save.
6.16 Dual Watch
Allows monitoring of two frequencies (Channel A and B). To enable: Press MENU then 2, then MENU, then select '15 Dual Watch'. Press MENU to enter, select 'On', then MENU to save. The 'D' icon will appear.
6.17 Stopwatch
Press and hold MENU to activate. Press MENU to start/stop. Press EXIT to quit.
7. Maintenance
7.1 General Care
- Clean the radio with a soft, damp cloth. Do not use harsh chemicals or solvents.
- Keep the radio dry. If it gets wet, wipe it dry immediately.
- Avoid exposing the radio to direct sunlight or extreme temperatures for extended periods.
- Do not disassemble the radio; repairs should only be performed by authorized personnel.
7.2 Battery Care
- Charge the battery fully before first use.
- Do not overcharge or over-discharge the battery.
- Store the battery in a cool, dry place when not in use.
- If the battery is not used for a long time, charge it every three months to maintain its capacity.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Radio won't turn on | Battery is low or not properly installed | Charge battery, ensure it's securely latched |
| No sound or low volume | Volume too low, squelch level too high, or wrong channel/frequency | Increase volume, adjust squelch, verify channel/frequency |
| Cannot transmit | Wrong frequency, busy channel, or low battery | Check frequency, wait for channel to clear, charge battery |
| Keypad locked | Keypad lock function is active | Press and hold * to unlock |
| Wireless programming fails | Bluetooth not enabled, wrong model selected, or app issue | Ensure Bluetooth is on, select '5Rmini Series', restart app/radio |
9. Specifications
| Feature | Specification |
|---|---|
| Frequency Range | RX: FM 65-108MHz, AM 108-136MHz, 350-390MHz, 480-520MHz RX/TX: 136-174MHz, 400-470MHz |
| Output Power | 3W-5W |
| Storage Channels | 999 |
| Battery Capacity | 2200mAh |
| Charging Port | Type-C |
| Dimensions (without antenna) | 107*52*37mm |
| Weight (with battery pack) | 212g |
| Material | Plastic |
| Waterproof | No |
| Display | Yes |
| Maximum Range | 3km-5km |
| Certification | CE, FCC, RoHS |
| Antenna Impedance | 50 Ohm |
| Rated Audio Power Output | 1W @16 ohms |
Note: Specifications are subject to change without prior notice.
10. User Tips
- Wireless Programming: Take advantage of the Bluetooth APP programming for easy frequency adjustments and settings management on the go.
- Dual PTT: Utilize the independent PTT-A and PTT-B buttons to quickly switch between two frequency groups, enhancing operational efficiency.
- Universal Charging: Always carry a Type-C cable and a power bank for convenient charging in any situation, especially during outdoor activities.
- NOAA Weather: Keep the NOAA Weather Radio function active during outdoor trips for timely weather alerts.
11. Warranty and Support
Baofeng products are designed for reliability and performance. For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact your authorized Baofeng dealer. Keep your proof of purchase for warranty claims.
12. EU Declaration of Conformity
Baofeng and Pofung declare that the radio equipment type MINI-5 is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available from your local Baofeng helpdesk or dealer.
This device operates on frequencies administered by national regulations. Users must consult local authorities for licensing requirements.
This symbol indicates that this product should not be disposed of with household waste. It should be handed over to an applicable collection point for the recycling of electrical and electronic equipment.