1. Product Overview
The ohwogot MX2 Mini Camera is an ultra-small, discreet security camera designed for various recording needs. It features 1080P Full-HD video recording, IR-CUT night vision, motion detection, and loop video functionality. Its compact size makes it highly portable and easy to conceal.
Figure 1: The ohwogot MX2 Mini Camera, emphasizing its small size and key features.
Figure 2: Detailed view of the camera's compact dimensions and core capabilities.
Figure 3: Visual representation of the camera's main functions.
2. Package Contents
Please check the package contents upon receipt:
- ohwogot MX2 Mini Camera
- USB Data Cable
- User Manual (this document and a PDF version)
- (Optional) MicroSD/TF Card (if purchased with the camera)
Figure 4: Typical package contents and camera diagram.
3. Device Layout
Familiarize yourself with the camera's components and controls:
Figure 5: Front and side views of the camera with labeled components.
- Lens: Captures video.
- Infrared Light: Provides illumination for night vision.
- Indicator Light: Displays device status (blue for standby, red for motion detection).
- Radiating Hole: For heat dissipation.
- USB Port: For charging and data transfer.
- TF Card Slot: For inserting the MicroSD/TF memory card.
- ON/OFF Switch: Power control.
- Motion Detection Key: Activates motion detection mode.
- Record Key: Initiates video recording.
4. Setup
- Insert TF Card: Before using the camera, ensure a TF (MicroSD) card is inserted into the TF Card Slot. The camera will not function without a memory card.
- Charging: Connect the camera to a 5V/1A charger using the provided USB cable. If the camera has a built-in battery, a full charge takes approximately 1 hour. There is no indicator light during charging, but the camera can operate while charging.
- Power On: Long press the Motion Detection key for 2 seconds. The blue indicator light will turn on, indicating the camera is in standby mode.
5. Operating Instructions
5.1 Power ON/OFF
- Power On: If the camera does not have a built-in battery, it must be connected to a portable or fixed power supply. Long press the Motion Detection key for 2 seconds. The blue indicator will turn on, and the camera will enter standby mode.
- Power Off: While in standby mode, long press the Motion Detection key for 2 seconds. The indicator light will turn off, and the camera will shut down.
5.2 Video Recording
Figure 6: One-key operation for motion detection and video recording.
- Start Recording: In standby mode, press the Record key once. The camera will begin recording. The blue indicator light will flash 3 times and then turn off.
- Stop Recording: While recording, press the Record key once. The camera will stop recording and return to standby mode, with the blue indicator light illuminated.
5.3 Motion Detection
- Activate Motion Detection: In standby mode, press the Motion Detection key once. The red indicator light will blink and then go out, indicating motion detection is activated.
- Automatic Recording: When an object moves in front of the camera, it will automatically record for 2 minutes and then return to motion detection standby mode. If further movement is detected, it will activate video recording again for 2 minutes, repeating this cycle.
- Exit Motion Detection: While in motion detection mode, press the Motion Detection key once. The system will save the current file and return to standby mode, with the blue indicator light illuminated.
5.4 IR-CUT Night Vision
The intelligent IR-CUT function automatically activates or deactivates night vision based on changes in the ambient light environment, ensuring optimal recording in varying light conditions.
5.5 Time Setting (Timestamp)
To set the timestamp for your recordings:
- After starting the camera for video recording, a text file named
SETTIME.TXTwill be automatically generated on the memory card. - Open this file on a computer.
- Correct the date and time figures within the file to the current time.
- Save the document.
- Safely eject the removable disk from your computer.
- The new video recordings will automatically have the updated timestamp.
Figure 7: SETTIME.TXT file format for configuring loop video and timestamp.
File Format Explanation:
- The first letter (Y/N) controls Loop Video (Y = on, N = off).
- The second letter (Y/N) controls whether the video file displays the timestamp (Y = yes, N = no).
5.6 Loop Video
- Activated: If loop video is activated (set to 'Y' in
SETTIME.TXT), when the memory card is full, the latest video file will automatically overwrite the earliest video file. - Deactivated: If loop video is deactivated (set to 'N' in
SETTIME.TXT), when the memory card is full, video recording will automatically shut down.
Figure 8: Memory card capacity and approximate recording duration.
Figure 9: The camera supports 7x24H continuous operation with loop recording and IR-CUT.
5.7 Video Reading
You can access recorded videos in two ways:
- Via Card Reader: Remove the TF card from the camera and insert it into a card reader connected to your computer.
- Via USB Cable: Connect the camera to your computer using the USB cable. Long press the Motion Detection key for 2 seconds to activate standby mode, allowing the computer to recognize the device as a removable disk.
6. Maintenance
- Lens Focus: For optimal image quality (correct color, clear, and stable), ensure the lens is focused on the object and kept approximately 50cm away.
- Charging: Use a 5V/1A charger. If the camera has a built-in battery, a full charge takes about 1 hour. The camera can operate while charging.
- Storage: Store the camera in a cool, dry place away from direct sunlight and extreme temperatures.
- Cleaning: Use a soft, dry cloth to clean the camera body and lens. Avoid using harsh chemicals or abrasive materials.
7. Troubleshooting
- Camera Not Recording/Functioning: Ensure a TF (MicroSD) card is properly inserted. The camera requires a memory card to operate.
- Memory Card Issues: If you experience issues with recording or data storage, consider using a memory card purchased from the original seller. Compatibility issues can arise with third-party memory cards.
- Poor Image Quality: Check that the lens is clean and positioned approximately 50cm from the subject for optimal focus.
- Camera Not Powering On: Ensure the camera is sufficiently charged or connected to a stable 5V/1A power source.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | MX2 Mini Camera |
| High Definition Support | 1080P (Full-HD) |
| Sensor Technology | CMOS |
| Memory Card Type | MicroSD / TF (supports up to 128GB) |
| Built-in Memory Size | Non |
| Camera Stabilization | NONE |
| Type | Mini |
| Certification | CE |
| Dimensions (approx.) | 2.7cm x 1cm x 3cm |
| Power Consumption (Day) | ~130mAh per hour |
| Power Consumption (Night Vision) | ~180mAh per hour |
9. User Tips
- Memory Card Recommendation: To ensure optimal performance and avoid compatibility issues, it is highly recommended to use a MicroSD/TF card purchased directly from the seller or a reputable brand known for compatibility with mini cameras.
- Optimal Placement: For the clearest and most stable images, position the camera's lens approximately 50cm from the object you wish to record.
- Legal Compliance: Always use the camera in accordance with applicable local laws and regulations. Misuse for illegal activities is strictly forbidden.
10. Warranty and Support
For further assistance or detailed information, please refer to the official user manual PDF:
Disclaimer: Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.