Dawupine DIY12V

Contents

DIY 12V 3S7P 18650 Lithium Battery Storage Case Kit with 40A Balanced BMS

Instruction Manual

Product Overview

This DIY kit provides components for assembling a 12V 3-series 7-parallel (3S7P) lithium battery pack using 18650 cells. It includes a durable storage case, battery holders, a 40A balanced Battery Management System (BMS) PCBA, and nickel strips for connections. This kit is ideal for various electronic and automotive projects, offering a reliable power source for outdoor activities, electric vehicles, and general DIY power solutions.

Various colored battery cases with internal components
Image: Overview of the DIY 12V 3S7P 18650 Lithium Battery Storage Case Kit, showing different colored cases and included components like battery holders, BMS, and nickel strips.
Compact and Versatile Battery Storage Kit
Image: Highlighting the compact and versatile nature of the battery storage kit, suitable for custom battery packs.

Important Safety Information & Prerequisites

Before proceeding with assembly, please read this section carefully.

  • Professional Knowledge Required: To use this product, you need to have professional knowledge and experience in battery assembly and electronics.
  • Required Tools & Materials (Not Included): You must have 18650 POWER li-ion batteries and tools such as spot welding machines, soldering irons, multimeters, and suitable chargers.
  • Battery Cells Not Included: This product is a DIY battery box kit and does not include the 18650 battery cells.
  • Voltage Equalization: Ensure that the voltage of each 18650 cell is the same before welding the PCB (BMS).

Disclaimer: This product is a semi-manufactured DIY kit and does not come with after-sales service, returns, or refunds. Purchase with caution and only if you possess the necessary skills and tools.

Setup and Assembly

Follow these steps to assemble your 12V 3S7P 18650 lithium battery pack:

  1. Prepare 18650 Cells: Gather twenty-one (21) 18650 lithium-ion battery cells. Ensure all cells are of the same type, capacity, and are balanced (have the same voltage) before assembly. This is critical for safety and performance.
  2. Insert Cells into Holders: Place the 18650 cells into the provided battery holders. Pay close attention to the polarity markings (+ and -) on the holders to ensure correct orientation. The kit is designed for a 3-series, 7-parallel configuration.
    Battery holder with polarity markings
    Image: Internal view of the battery holder showing clear positive (+) and negative (-) polarity markings for 18650 cells. Ensure correct cell insertion.
  3. Connect Cells with Nickel Strips: Use a spot welder to connect the cells in the 3-series 7-parallel configuration using the provided nickel strips. Ensure strong, low-resistance welds. The BMS will then be connected to these series and parallel connections.
    Assembled battery pack with BMS and nickel strips
    Image: An assembled 18650 battery pack showing cells connected with nickel strips and the BMS board attached, ready to be placed inside the case.
  4. BMS Wiring: Connect the 40A balanced BMS PCBA to the battery pack. Refer to the wiring diagram for correct connections. The BMS provides overcharge, over-discharge, overcurrent, and short-circuit protection, along with balancing capabilities.
    BMS wiring diagram
    Image: Detailed wiring diagram for the 3S 40A BMS, illustrating connections for battery cells (B-, B1, B2, B+), and input/output terminals (P-, P+). Ensure all connections are made accurately to prevent damage.

    The diagram shows the following connections:

    • B- (Battery Negative): Connect to the negative terminal of the first series cell.
    • B1: Connect to the positive terminal of the first series cell and negative of the second.
    • B2: Connect to the positive terminal of the second series cell and negative of the third.
    • B+ (Battery Positive): Connect to the positive terminal of the third series cell.
    • P- (Input/Output Negative Pole): Connect to the negative terminal of your load/charger.
    • P+ (Input/Output Positive Pole): Connect to the positive terminal of your load/charger.
    Front and back of 3S 40A BMS PCBA
    Image: Front and back views of the 3S 40A Balanced BMS PCBA, showing components and connection points.
  5. Enclose in Case: Carefully place the assembled battery pack with the connected BMS into the storage case. Ensure all wires are neatly tucked away and do not get pinched. Close the lid securely.
    Disassembled battery case
    Image: Disassembled green battery case, showing the main body and the lid, ready for battery pack insertion.

Operating Instructions

Once assembled, your 12V 3S7P battery pack can be used to power compatible 12V devices.

  • Charging: Connect a suitable 12V lithium battery charger to the P+ and P- terminals of the BMS. The BMS will manage the charging process, including cell balancing.
  • Discharging: Connect your 12V load to the P+ and P- terminals. The BMS will protect the battery from over-discharge and overcurrent.
  • Monitoring: Use a multimeter to periodically check the overall voltage of the battery pack and individual cell voltages (if accessible) to ensure proper operation and balancing.

Maintenance

  • Regular Inspection: Periodically inspect the battery case for any signs of damage, swelling, or corrosion.
  • Connection Check: Ensure all connections, especially those to the BMS and output terminals, are secure and free from loose contacts.
  • Storage: If storing the battery pack for an extended period, ensure it is charged to approximately 50-60% of its capacity and stored in a cool, dry place away from direct sunlight and extreme temperatures.
  • Avoid Over-Discharge/Over-Charge: The BMS is designed to protect against these, but always use appropriate chargers and avoid leaving devices connected that could deeply discharge the battery.

Troubleshooting

  • No Power Output:
    • Check all wiring connections to the BMS and output terminals for looseness or incorrect polarity.
    • Verify that the battery cells are properly inserted and connected within the holders.
    • Measure the total battery pack voltage. If it's too low, the BMS might have triggered under-voltage protection. Try charging the pack.
    • Check for short circuits in the load or wiring. The BMS may have triggered overcurrent/short-circuit protection.
  • Battery Not Charging:
    • Ensure the charger is compatible with 12V lithium battery packs and is functioning correctly.
    • Check the charging connections to the BMS.
    • The BMS might have triggered over-discharge protection if the battery was deeply discharged. Some chargers may not initiate charging in this state.
  • Unbalanced Cell Voltages:
    • The BMS has a balancing function, but significant imbalances might require manual balancing of individual cells before assembly or a longer balancing period during charging.
    • Ensure all cells used are matched in capacity and internal resistance for optimal performance.

Specifications

Feature Detail
Model Number DIY12V
Type Battery Storage Box Kit
Battery Configuration 3 Series, 7 Parallel (3S7P) for 18650 cells
BMS Type 40A Balanced BMS PCBA
Nominal Voltage 12V (for 3S Li-ion)
Material ABS (Case)
Origin Mainland China
Package Dimensions (L x W x H) 17 cm x 12 cm x 8 cm
Package Weight 0.2 kg
Battery case dimensions
Image: Dimensions of the battery case. Outside: 150.4mm x 65mm x 97mm. Internal: 145.6mm x 60mm x 85.5mm.

User Tips

  • Always double-check polarity before making any connections to avoid damage to the BMS or batteries.
  • Use a high-quality spot welder for nickel strip connections to ensure durability and minimize resistance.
  • For best performance and longevity, use 18650 cells with similar internal resistance and capacity.
  • Consider adding a fuse to the main output for additional safety, especially in high-current applications.

Warranty and Support

As this is a DIY (semi-manufactured) product, it is sold without after-sales service, returns, or refunds. It is crucial that users possess the necessary professional knowledge and experience for assembly and operation.

For any questions regarding the product components or general guidance, please contact the seller directly through the platform where the purchase was made.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.