D 50W LED Floodlight

Contents

50W LED Floodlight User Manual

1. Introduction

Thank you for purchasing the 50W LED Floodlight. This manual provides essential information for the safe installation, operation, and maintenance of your floodlight. Please read it thoroughly before use and retain it for future reference.

This LED floodlight is designed for various outdoor and indoor lighting projects, offering bright and efficient illumination. It features an IP66 waterproof rating, making it suitable for challenging environments. Some models (Model C) are equipped with a PIR motion sensor for enhanced functionality.

2. Safety Information

  • Always disconnect the power supply before installing, cleaning, or performing any maintenance on the floodlight.
  • Ensure the voltage supplied matches the rated voltage of the floodlight (AC220V). Exceeding the rated voltage can damage the unit.
  • Keep the floodlight away from corrosive, flammable, or explosive environments.
  • Installation must be performed by a qualified professional electrician to ensure correct and firm wiring, preventing electrical hazards.
  • Ensure all connections are secure and properly insulated.
  • Do not immerse the floodlight in water, despite its IP66 rating.

3. Product Overview

The 50W LED Floodlight is available in different models. Please note that only Model C includes a PIR (Passive Infrared) motion sensor. Models A and B do not have a PIR sensor.

Two 50W LED floodlights, one white and one black, with IP66 rating and a small motion sensor on the black unit.

Figure 1: 50W LED Floodlight (White and Black models shown)

3.1 Dimensions

White 50W LED floodlight with dimensions: 205mm width, 165mm height, 47mm depth.

Figure 2: Floodlight Dimensions (Model A/B example)

Black 50W LED floodlight with PIR sensor and dimensions: 195mm width, 151mm height.

Figure 3: Floodlight with PIR Sensor Dimensions (Model C example)

3.2 Heat Dissipation

Back view of the floodlight showing fins for heat dissipation with arrows indicating airflow.

Figure 4: Back Heat Dissipation Design

3.3 PIR Motion Sensor (Model C Only)

The PIR motion sensor allows for automatic light activation based on movement. It features adjustable settings for sensitivity, duration, and ambient light detection.

Diagram showing PIR sensor induction with 100 degree rotation and 180 degree angle adjustment, and mounting options for wall, roof, and ground use. Detection distance is 6-12 meters.

Figure 5: PIR Sensor Features and Mounting Flexibility

Close-up of the PIR sensor adjustment knobs labeled SENS, TIME, and LUX.

Figure 6: PIR Sensor Adjustment Knobs

  • SEN (Sensitivity Knob): Adjusts the detection range from 2 to 8 meters.
  • TIME (Duration Knob): Sets how long the light stays on after motion is detected, from 5 seconds to 12 minutes.
  • LUX (Light Sensitivity Knob): Adjusts the sensor's activation sensitivity to ambient light. It supports all-day detection or night-only detection modes.
Diagram showing induction distance for parallel shift (10m radius) and vertical movement (3m radius) at a 120-degree angle and 2.5m installation height.

Figure 7: PIR Sensor Induction Distance

4. Setup and Installation

4.1 Mounting Methods

The floodlight can be mounted in various positions using its adjustable bracket:

  • Mount on the wall: Secure the bracket to a vertical surface.
  • Mount on the ceiling: Attach the bracket to an overhead surface.
  • Mount into the ground: Secure the bracket to a ground stake or base.

Ensure the fastening parts are strong and stable to prevent accidents. The bracket allows for adjustment of the lighting angle.

Side view of the black floodlight with PIR sensor, showing its adjustable bracket and sensor rotation capabilities.

Figure 8: Adjustable Bracket and Sensor

4.2 Wiring Instructions

The floodlight uses a three-core power cord (brown, blue, green-yellow). Ensure proper connection according to the following color code:

  • Brown wire: Live wire
  • Blue wire: Neutral wire
  • Green/Yellow wire: Earth wire

Connect the floodlight's power cords to your main supply cables. All power cord connection parts must be properly insulated. After fixing the bracket and connecting the cables, adjust the floodlight to the desired angle and tighten the screws on both sides of the bracket.

5. Operating Instructions

5.1 General Operation

Once installed and wired, simply plug the floodlight into the power supply to turn it on. For models without a PIR sensor, the light will turn on when power is supplied.

5.2 PIR Motion Sensor Operation (Model C Only)

Follow these steps to calibrate and test the PIR sensor before normal use:

5.2.1 Power On & Initial Settings

  1. Turn on the power supply to activate the connected floodlight.
  2. Rotate the TIME knob fully counter-clockwise to the "-" position (minimum duration).
  3. Rotate the LUX knob fully clockwise to the "Sun" icon position (for all-day detection mode).

5.2.2 Auto Calibration

After powering on, wait approximately 35 seconds. The floodlight will turn on and then automatically disconnect. This indicates the sensor has completed its initial self-calibration.

5.2.3 Test Detection Function

  1. Within the sensor's 2-8 meter detection range, move in a circular pattern around the sensor.
  2. When the sensor detects human movement, the floodlight will automatically turn on.
  3. Once movement stops, the floodlight will automatically disconnect after approximately 5 seconds.
  4. Important Note: To ensure stable operation, the sensor enters a 5-second "lockout" period after disconnecting the load. Wait 5 seconds before initiating another detection test.

5.2.4 Final Setup & Normal Use

Adjust the TIME and LUX knobs to your desired settings based on your operational needs. The sensor is now ready for regular use.

6. Maintenance

  • Ensure power is off before cleaning.
  • Clean the floodlight's surface and lens with a soft, damp cloth.
  • Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or internal components.
  • Regularly check the mounting and wiring for any signs of wear or loosening.

7. Troubleshooting

  • Light does not turn on:
    • Check the power supply and ensure it is connected correctly.
    • Verify that the wiring connections are secure.
    • For PIR sensor models, check the LUX setting; it might be set too low for current ambient light conditions.
  • Light stays on continuously (PIR models):
    • Check if there is constant motion within the sensor's detection range.
    • Adjust the SENS (sensitivity) knob to a lower setting.
    • Ensure the TIME knob is not set to its maximum duration.
  • Light turns on unexpectedly (PIR models):
    • Adjust the SENS (sensitivity) knob to a lower setting to reduce false triggers.
    • Ensure the sensor is not pointing towards heat sources or moving objects like tree branches.
  • Light dims or fails to turn on (non-PIR models):
    • Ensure the input voltage is stable at AC220V. If the voltage is below 220V, the light may dim or not function correctly.

8. Specifications

FeatureSpecification
Power50W
Input VoltageAC220V
Luminous Flux249-2000 Lumens
Light ColorWarm White (2700-3500K), Cold White (5500-7000K)
Body MaterialAluminium alloy
Protection LevelIP66 (Waterproof, not for submersion)
CertificationCE
Power SourceAC
Bulbs IncludedYes
PIR Sensing Range2-8 meters (120 degree angle)
PIR Sensing Time8 seconds - 10 minutes (adjustable)
Dimensions (approx.)20.5cm x 16.5cm x 4.7cm (varies slightly by model)
Weight (approx.)0.6 kg

9. User Tips

  • For optimal motion detection, position the PIR sensor (Model C) where movement will cross its detection field rather than directly towards it.
  • Experiment with the SENS, TIME, and LUX settings on your PIR sensor to find the perfect balance for your specific environment and needs.
  • Ensure the sensor is not obstructed by plants or other objects that could cause false triggers.

10. Warranty and Support

For warranty information and technical support, please refer to the seller's policies or contact their customer service directly. Keep your purchase receipt as proof of purchase.

© 2023 D Official Store. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.