1. Introduction
The ZoeRax 10G Single-mode SFP Transceiver is a high-performance, cost-effective module designed for serial optical data communication applications. It features a Simplex SC interface, supports transmission distances up to 20km, and includes Digital Diagnostic Monitoring (DDM) functions for real-time operational status monitoring. This transceiver offers wide compatibility with various network equipment brands, ensuring seamless integration into your existing infrastructure.

Figure 1: ZoeRax 10G Single-mode SFP Transceiver
2. Safety Information
- Electrical Safety: Do not use for live working to prevent electric shock. Ensure all connected equipment is properly grounded.
- Optical Safety: Never look directly into the optical port when the transceiver is powered on, as laser radiation can cause eye damage.
- Handling: Handle the transceiver with care. The optical interfaces are delicate and susceptible to damage from dust or physical impact.
- Contamination: Keep optical ports covered with protective caps when not in use to prevent contamination from dust and debris.
3. Precautions
- Environment: Avoid exposing the module to extreme temperatures, high humidity, or corrosive environments.
- Compatibility: Only use with compatible single-mode fiber optic cables (9/125µm). Ensure the Tx/Rx wavelengths match between connected transceivers.
- Installation: Ensure the SFP slot on your network device is clean and free of obstructions before inserting the transceiver.
- Cables: Do not bend fiber optic cables beyond their minimum bend radius to prevent signal loss or damage.
4. Setup and Installation
4.1. Instructions for Use
- Inspection: Upon receipt, carefully inspect the SFP transceiver for any physical damage.
- Compatibility Check: Verify that the transceiver is compatible with your network device (switch, router, server, etc.). Refer to the compatibility chart below.
- Installation: Follow the specific installation procedures outlined in your network device's user manual.
4.2. Installation Steps
The ZoeRax SFP Transceiver supports hot-swapping and features a plug-and-play design for easy installation.
- Remove the protective dust cap from the transceiver's optical port.
- Gently slide the SFP transceiver into the designated SFP slot on your network device until it clicks into place.
- Connect a compatible single-mode fiber optic cable to the transceiver's Simplex SC port. Ensure the cable is securely connected.
- Connect the other end of the fiber optic cable to the corresponding optical port on the remote network device.
- Verify the link status indicators on your network device to confirm successful connection.

Figure 2: Easy Installation - SFP transceiver supports hot-swapping, plug and play.
4.3. Wide Compatibility
The ZoeRax SFP Transceiver is designed for broad compatibility with various network equipment brands.

Figure 3: Widely compatible with brands like Cisco, Ubiquiti, QNAP, TP-Link, Zyxel, Brocade, D-Link, Broadcom, Netgear, Mikrotik, and other brands.
4.4. Versatile Applications
This transceiver is suitable for devices with SFP optical ports in various networking environments.

Figure 4: Applicable Products - Fiber optic switch, router, transceiver, network interface card, server, data center.
5. Operating Instructions
5.1. Digital Diagnostic Monitoring (DDM)
The DDM feature allows you to monitor the working status of optical modules in real-time. This helps in quickly locating faults, simplifying maintenance work, ensuring system reliability, and improving work efficiency. Monitored parameters include:
- Module temperature
- Transmitted optical power
- Laser bias current
- Supply voltage
- Received optical power

Figure 5: Digital Diagnostic Monitoring (DDM) provides real-time insights into module performance.
5.2. High-Speed and Stable Transmission
The SC Single-mode Simplex fiber optical module is engineered for reliable and high-speed data transmission, featuring:
- Gold-plated contacts: Thickened gold-plated contacts ensure durability for plugging and unplugging, anti-oxidation properties, and high reliability.
- High-quality Laser: Selected high-quality lasers are used to ensure efficient and stable optical transmission.
- Electroplated hard gold process: The zinc alloy shell provides excellent heat dissipation performance and is not easy to deform, ensuring long-term stability.

Figure 6: Internal components designed for high-speed and stable data transmission.
5.3. Product Overview and Testing
Video 1: A brief overview of the ZoeRax SFP Transceiver, demonstrating its features, installation, and real-world testing in a data center environment.
6. Maintenance
- Connector Cleaning: Regularly inspect and clean the optical connectors using appropriate fiber optic cleaning tools (e.g., lint-free wipes, cleaning sticks, or specialized cleaning pens). Contaminated connectors are a primary cause of signal loss.
- Dust Caps: Always replace the protective dust caps on the transceiver's optical ports when it is not in use or when cables are disconnected.
- Cable Management: Ensure fiber optic cables are properly routed and secured to avoid physical stress, sharp bends, or accidental disconnections.
- Environmental Control: Maintain a stable operating environment within the specified temperature and humidity ranges to prolong the transceiver's lifespan.
7. Troubleshooting
7.1. Frequently Asked Questions (FAQ)
- Module not detected by network device?
Verify that the SFP transceiver is fully inserted into the SFP slot. Ensure the transceiver is compatible with your network device's make and model. Check the device's logs for any error messages. - Unstable network connection or no link light?
Inspect the fiber optic cable for any damage or sharp bends. Ensure the fiber optic cable is securely connected to both the transceiver and the remote device. Verify that the Tx/Rx wavelengths of the connected transceivers match. Try restarting the connected network devices (switch, router). - Abnormal functionality or unexpected performance?
Check the DDM parameters (if supported by your network device) for any values outside the normal operating range. Consult your network device's user manual for specific SFP module troubleshooting steps. If issues persist, contact ZoeRax customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | SFP10G-SM20AB |
| Brand Name | ZoeRax |
| Fiber Type | Single Mode |
| Transmission Distance | Up to 20km |
| Data Rate | 10Gbps (Adaptive to 1.25Gbps/2.5Gbps) |
| Wavelength A (Tx/Rx) | Transmit 1310nm / Receive 1550nm |
| Wavelength B (Tx/Rx) | Transmit 1550nm / Receive 1310nm |
| Interface Type | Simplex SC |
| DDM Support | Yes |
| Origin | Mainland China |
| Package Length | 20 cm |
| Package Width | 15 cm |
| Package Height | 5 cm |
| Package Weight | 0.32 kg |
9. User Tips
- Always ensure the fiber optic cable matches the module type (single-mode) and connector type (SC).
- Use appropriate cleaning methods for optical connectors to prevent signal degradation and ensure optimal performance.
- When deploying a pair of transceivers, verify that the Transmit (Tx) wavelength of one module matches the Receive (Rx) wavelength of the other, and vice-versa, for proper bidirectional communication.
10. Warranty and Support
The ZoeRax 10G Single-mode SFP Transceiver comes with a 12-month warranty from the date of purchase. For warranty claims, technical support, or any inquiries regarding your product, please contact the ZoeRax Official Store or your authorized reseller.
For more detailed information and additional resources, you may refer to the official User Manual PDF provided by ZoeRax: View User Manual (PDF)

Figure 7: ZoeRax commitment to premium customer support, advanced production, and quality assurance.