1. Introduction
1.1 Product Profile
The LAUNCH X431 IMMO Elite is an advanced automotive diagnostic and key programming tool, inheriting LAUNCH's cutting-edge diagnostic technology. It offers comprehensive vehicle coverage, powerful functions, and precise test results through wireless/USB communication between the VCI (Vehicle Communication Interface) device and the display tablet.
This tool provides basic diagnostic functions such as reading version information, Diagnostic Trouble Codes (DTCs), clearing DTCs, and reading data streams. For advanced functions, it supports full diagnostic capabilities including actuation tests, matching, coding, and programming.
Key Features:
- IMMO (Immobilizer): Performs anti-theft key matching, allowing the immobilizer control system to recognize and authorize remote control keys.
- IMMO PROG (Immobilizer Programming): Requires the X-PROG 3 for reading transponder data, generating exclusive keys, and reading/writing EEPROM/MCU/ECU chip data.
- Intelligent Diagnose: Uses VIN information for quick tests, accessing vehicle data and historical diagnostic records from the cloud server.
- Local Diagnose: Guides users through diagnostic sessions step-by-step.
- Remote Diagnose: Facilitates instant messaging and remote diagnosis for faster repairs.
- Service Function: Includes common maintenance and reset items.
- TPMS: Configures the tool for professional Tire Pressure Monitoring System functions (requires TSGUN device, sold separately).
- Diagnostic History: Provides quick access to previously tested vehicles and test reports.
- Feedback: Allows submission of vehicle issues for analysis and troubleshooting.
- One-click Update: Online diagnostic software updates.
- Vehicle Coverage: Quick access to supported vehicle models.
- Add-on modules: Supports optional modules like BST 360 Battery Tester, S2-2 Sensorbox, Multimeter, and Videoscope.
Video: Overview of the Launch X431 IMMO Elite's features and capabilities.
2. Important Safety Precautions
To prevent personal injury, property damage, or accidental damage to the product, carefully read all information in this section before using the tool.
General Safety Guidelines:
- Ventilation: When an engine is operating, ensure the service area is well-ventilated or use an exhaust removal system. Engine exhaust contains poisonous compounds.
- Power Supply: Use only the included battery and power adaptor. Replacing the battery with an incorrect type poses an explosion risk.
- Driving Safety: DO NOT operate the tool while driving. Have a second person operate the tool to avoid distractions and accidents.
- Work Environment: Always perform automotive testing in a safe environment.
- Connections: Do not connect or disconnect any test equipment while the ignition is on or the engine is running.
- Vehicle Position: Before starting the engine, ensure the gear lever is in Neutral (manual transmission) or Park (automatic transmission).
- Flammable Materials: NEVER smoke or allow sparks/flames near the battery or engine. Do not operate the tool in explosive atmospheres (flammable liquids, gases, heavy dust).
- Fire Safety: Keep a fire extinguisher suitable for gasoline/chemical/electrical fires nearby.
- Eye Protection: Wear ANSI-approved eye shields when testing or repairing vehicles.
- Vehicle Stability: Place blocks in front of the drive wheels and never leave the vehicle unattended while testing.
- High Voltage: Use extreme caution when working around ignition coils, distributor caps, ignition wires, and spark plugs, as these components create hazardous voltage when the engine is running.
- Battery Charge: Ensure the vehicle battery is fully charged and the connection to the vehicle DLC (Data Link Connector) is clear and secure to avoid damaging the tool or generating false data.
- Sulfuric Acid: Automotive batteries contain sulfuric acid, which is harmful to skin. Avoid direct contact and keep ignition sources away from the battery.
- Tool Care: Keep the tool dry, clean, free from oil, water, or grease. Use a mild detergent on a clean cloth for cleaning.
- Moving Parts: Keep clothing, hair, hands, tools, and test equipment away from all moving or hot engine parts.
- Storage: Store the tool and accessories in a locked area out of reach of children.
- Water Exposure: Do not use the tool while standing in water or expose it/power adapter to rain/wet conditions to prevent electric shock.
- Internal Repairs: This tool is a sealed unit with no end-user serviceable parts. All internal repairs must be done by an authorized repair facility or qualified technician.
- Magnetic Devices: Keep the tool far away from magnetic devices, as their radiation can damage the screen and erase data.
- Battery Replacement: Do not attempt to replace the internal rechargeable lithium battery. Contact the dealer for factory replacement.
- ECU Protection: Do not disconnect the battery or any wiring cables when the ignition switch is on to prevent damage to sensors or the ECU. Avoid placing magnetic objects near the ECU. Disconnect power to the ECU before welding.
- Static Electricity: Use extreme caution when working near the ECU or sensors. Ground yourself when disassembling PROM to prevent static electricity damage.
- ECU Harness: Ensure the ECU harness connector is firmly attached when reconnecting to prevent damage to internal electronic elements.
- Technician Knowledge: Technicians must be knowledgeable about the vehicle and its systems due to various procedures, techniques, tools, and parts involved in vehicle servicing.
3. Setup and Initial Use
3.1 Components & Controls
The diagnostic system consists of two main components: the Display Tablet and the VCI Device.
Display Tablet Overview:
The tablet serves as the central processing system, receiving and analyzing live vehicle data from the VCI device and displaying test results.

Image: Front view of the Launch X431 IMMO Elite Display Tablet.
| No. | Item | Description |
|---|---|---|
| 1 | Microphone | For audio input. |
| 2 | Type-A USB Port | Connects to VCI connector for USB diagnosis or compatible add-on modules/USB storage. |
| 3 | Type-C USB Port | Connects to AC outlet for charging or PC for data exchange. |
| 4 | POWER Key | Turns tablet on/off, activates/turns off LCD, performs forced shutdown. |
| 5 | LCD Screen | Displays test results and user interface. |
| 6 | Speakers | For audio output. |
| 7 | Rear Camera | 8.0MP camera for image capture. |
| 8 | Microphone | For audio input. |
VCI Connector Overview:
The VCI connector acts as a vehicle communication interface, connecting to the vehicle's DLC socket via a diagnostic cable to read vehicle data and transmit it to the tablet.
Note: Remember to remove the VCI connector from the vehicle's DLC after use.
| No. | Item | Description |
|---|---|---|
| 1 | Power indicator | Illuminates red when the VCI is powered up. |
| 2 | Vehicle indicator | Illuminates green and flashes when the VCI is communicating with the vehicle. |
| 3 | I/O indicator | Illuminates blue when communicating via Bluetooth; red when connected via USB cable. |
| 4 | DB-15 diagnostic connector | Connects to vehicle's OBD II DLC via the diagnostic cable. |
| 5 | USB port | Connects the VCI to the tablet for vehicle diagnosis via USB cable. |
3.2 Initial Power-Up and Basic Operations
Charging & Turning On:
- Use the included power adaptor to charge the tablet.
- After charging, press the POWER button for 3 seconds to turn the tablet on. The system will initialize and enter the home screen.
Note: If the battery is completely discharged or unused for a long time, it may not power on immediately while charging. Charge for 5 minutes before attempting to turn it on.
Warning: Only use the supplied power adaptor. Damage or loss from using other adaptors is not the responsibility of the manufacturer.
To turn off the tool, press the POWER button for 3 seconds, then tap Power off on the screen menu.
Screen Layout and Gestures:
The bottom of the screen features five on-screen buttons:
- Home: Navigates to the Android home screen.
- Recent App: Views running applications.
- VCI Connection: Shows VCI device connection status.
- Screenshot: Captures the current screen.
- Back: Returns to the previous screen.
Basic gestures for interaction:
- Single-tap: Select an item or launch a program.
- Double-tap: Zoom in on web pages.
- Long press: Access contextual menus.
- Slide: Navigate between pages.
- Drag: Move application icons.
- Spread apart/Pinch together: Manually zoom in/out.
System Settings:
- Change System Language: Go to Settings > System > Language & input > Languages. Add and drag your desired language to the top.
- Adjust Brightness: Go to Settings > Display > Brightness level and adjust the slider. (Lower brightness conserves battery).
- Set Standby Time: Go to Settings > Display > Advanced > Sleep and choose a desired sleep time to save power.
3.3 Network Setup
The tablet has built-in Wi-Fi for internet access, enabling tool registration, app downloads, email, remote diagnosis, and software updates.
- On the home screen, tap Settings > Network & Internet > WLAN.
- Slide the Wi-Fi switch to ON. The tablet will search for available wireless networks.
- Select a network. If open, it connects automatically. If encrypted, enter the password.
- "Connected" indicates a successful Wi-Fi connection.
Note: Disable Wi-Fi when not needed to conserve battery power.
3.4 Register & Update
New users must complete a registration process:
- Launch the application and tap Login.
- For new users, tap New Registration. Fill in required information (Username, Password, Email, etc.).
- Enter the 12-digit Product Serial Number and 8-digit Activation Code (found in the password envelope), then tap Activate.
- After successful registration, you will be prompted to update software. Tap Yes to go to the update center or No to ignore (updates can be checked later in Chapter 8).
Note: The tablet has an auto-save function for login credentials. If you forget your password, tap Retrieve password and follow on-screen instructions.
4. Vehicle Connections
4.1 Preparation
- Ensure the vehicle ignition is turned on.
- Verify the vehicle battery voltage is between 11-14 volts.
- Confirm the throttle is in the closed position.
- Locate the vehicle's DLC (Data Link Connector). It is typically located within 12 inches of the center of the instrument panel, under or around the driver's side. For some vehicles, the location may vary. Consult the vehicle's service manual if needed.

Image: General diagram showing common DLC locations in a vehicle.
4.2 Vehicle Connection Methods
The connection method depends on the vehicle's configuration:
OBD II Vehicle Connection:
For vehicles with an OBD II management system, use the included diagnostic cable to connect the VCI to the vehicle's DLC port. This provides both communication and 12V power.

Image: Illustration of connecting the VCI device to a vehicle's OBD II DLC port.
Non-OBD II Vehicle Connection:
For non-OBD II vehicles, follow these steps:
- Connect the VCI Device to the Diagnostic Cable.
- Connect the Diagnostic Cable to an OBD I Adaptor.
- Connect the OBD I Adaptor to the Vehicle's DLC.
- Connect the Vehicle's DLC to a Non-16pin Connector.
Note: If the DLC pin is damaged or has insufficient power, you can power the VCI via:
- Battery Clamps Cable (optional): Connects to the vehicle's battery.
- Cigarette Lighter Cable (optional): Connects to the cigarette lighter receptacle.
If performing diagnosis via data cable, connect one end to the VCI and the other to the tablet's USB port.
5. Operating Instructions
5.1 Job Menu Overview
The Job Menu provides access to various diagnostic and service functions:
- IMMO (Immobilizer): Anti-theft key matching.
- IMMO PROG (Immobilizer Programming): Transponder data reading, key generation, EEPROM/MCU/ECU chip data read/write (requires X-PROG 3).
- Intelligent Diagnose: Quick test via VIN, access to historical records.
- Local Diagnose: Manual vehicle diagnosis.
- Remote Diagnose: Remote assistance for repairs.
- Service Function: Common maintenance and reset items.
- TPMS: Tire Pressure Monitoring System functions (requires TSGUN).
- Diagnostic History: Access to past diagnostic reports.
- Feedback: Submit vehicle issues.
- Software Update: Update diagnostic software.
- Info Center: Product information and repair data.
- Vehicle Coverage: View supported vehicle models.
- User Info: Manage personal information and VCI.
- Other Modules: Access add-on modules (e.g., Videoscope, BST360).
5.2 Key Immobilizer & Immobilizer Programming
This section details the anti-theft key matching and programming functions.
5.2.1 Key Immobilizer (IMMO)
The IMMO function is used to match anti-theft keys, allowing the vehicle's immobilizer system to recognize and authorize remote control keys. This is necessary when replacing the ignition switch key, ignition switch, combined instrument panel, ECU, BCM, or remote control battery.
Vehicle Connection for IMMO:
- For most vehicles, connect the VCI to the vehicle's DLC port using the included diagnostic cable.
- For specific vehicles (e.g., Mercedes Benz, Volkswagen, BMW, Porsche), the X-PROG 3 is required. Use the DB15 to OBD16 diagnostic cable and the main diagnostic cable included with the X-PROG 3.

Image: Overview of key programming and IMMO services, including CAN FD and reset functions.
5.2.2 Immobilizer Operations (Example: BMW CAS4/CAS4+ Key Learning)
- Tap IMMO and select BMW to enter the software.
- Tap OK when prompted that an IMMO Programmer is required.
- Enter the Anti-Theft System. Follow the on-screen illustration to connect the VCI, vehicle, and X-PROG3/X-PROG (if purchased separately).
- If the anti-theft system type is unknown, tap Intelligent Mode.
- Tap CAS4/CAS4+ Anti-Theft System.
- Tap Preprocessing to perform Read Anti-Theft data, Key Matching, etc. The ECU will be upgraded, and files may need to be downloaded online.
- Ensure vehicle power supply voltage is stable and not lower than 13V. Tap Yes to start preprocessing.
- After preprocessing succeeds, tap OK.
- Return to the function menu and tap Key Learning.
- After key information is read, select an unused key position and tap Key Generated By Ignition Switch.
- Read and display the password, then tap OK.
- Place a new key close to the vehicle coil, tap OK, and wait for key generation.
- Once the dealer key is generated, attempt to start the vehicle.
- The key matching is now complete, and the new key is ready for use.
5.2.3 Immobilizer Programming (IMMO PROG)
The X-PROG 3 is required for IMMO PROG operations. Its functions include:
- Reading transponder data (including Mercedes Benz infrared smart key) and generating exclusive keys.
- Reading/writing on-board EEPROM chip data and MCU/ECU chip data.
For detailed operations, refer to the User Manual of the X-PROG 3.

Image: The X-PROG3 Immobilizer, a powerful tool for key programming and IMMO functionality.
5.3 Diagnosis
5.3.1 Intelligent Diagnose:
This function uses Bluetooth communication to automatically identify the vehicle's VIN, retrieve vehicle information and historical diagnostic records from a remote server, and guide you to the diagnostic page without manual menu selection.
- Tap Intelligent Diagnose on the Job menu.
- After VCI pairing and VIN reading, if the VIN is found, the vehicle information page appears.
- Tap Diagnostic to start a new diagnostic session.
- Tap Maintenance record to view historical repair records.
- Tap View Record for current diagnostic report details.
- Tap Quick access for function selection.
If VIN reading fails, you can manually enter the VIN or use the camera scan feature (VIN barcode or character scan).
5.3.2 Local Diagnose:
This mode requires manual menu-driven commands. Tap Local Diagnose to enter the vehicle selection page.
Two approaches to access diagnostic software:
- VIN SCAN: Quickly access by scanning VIN (camera scan or manual input).
- Manual Selection: Select diagnostic software version (e.g., DEMO), then select vehicle model (e.g., Ford).
Diagnostic Process (Example):
- Turn the ignition key to ON.
- Read vehicle information and confirm its correctness.
- Select a test item (e.g., Health Report, System Scan, System Selection).
5.3.3 Health Report (Quick Test):
This function accesses all electronic control units and generates a detailed vehicle health report.
- Tap Health Report on the test item selection screen.
- The system scans ECUs. Fault codes appear in red, normal functions in black.
- On-screen Buttons:
- Enter: Enter diagnostic function selection.
- Search: Retrieve DTCs in the search engine.
- Report: Save diagnostic result as a health report.
Warning: Never replace a part based solely on DTC definition. Always follow testing procedures in the vehicle's service manual.
Note: Diagnostic reports are classified as Pre-Repair, Post-Repair, and Diagnostic Scan. Ensure correct report type is saved for accurate comparison.
5.3.4 System Scan:
Quickly scans installed systems on the vehicle. Tap System Scan on the test item selection screen.
5.3.5 System Selection:
Manually select the test system and function step-by-step. Tap System Selection, then swipe to find and tap the target system (e.g., ECM).
Note: Diagnostic menus vary by vehicle.
5.3.6 Read Fault Code:
Displays detailed information of DTC records. Tap Read Fault Code on the diagnostic function selection screen.
5.3.7 Clear Fault Code:
Erases DTCs after repairs. Ensure ignition is ON and engine is OFF. Tap Clear Fault Code, then YES.
Note: Clearing codes does not fix the underlying problem. Troubleshoot and repair before clearing codes to prevent recurrence.
5.3.8 Read Data Stream:
View and capture real-time Live Data (Parameter Identification Data - PID) for sensor information and operating status. Tap Read Data Stream.
Caution: If driving is required for troubleshooting, always have a second person operate the diagnostic tool to avoid accidents.
On-screen Buttons:
- Select Page/All: Select items on current page or all items.
- Unselect: Deselect data stream items.
- OK: Confirm and proceed to data stream reading page.
- Graph (Single): View parameter in waveform graph.
- Min/Max: Define max/min values for alarms.
- Graph: View parameters in waveform graphs.
- Combine: Merge graphs for data comparison (max 4 items, different colors).
- Value: Switch to text list display.
- Customize: Select/deselect data stream items for display.
- Compare Sample: Select a sample DS file for comparison.
- Report: Save current data in text format.
- Record: Start/stop recording diagnostic data.
- Save Sample: Customize and save standard range of live data stream items.
5.4 Remote Diagnose
This module enables repair shops or technicians to diagnose vehicles remotely and communicate instantly.
5.4.1 Add Friends:
Tap Contacts, then use the search bar to find and add partners (workshops, technicians, golo users) who have registered diagnostic tools.
5.4.2 Start Instant Messaging:
Tap a friend's photo in Messages to send text, voice messages, emojis, or access more functions (File, Picture, Remote Diagnose, Camera).
5.4.3 Launch Remote Diagnosis (Device-To-Device):
Initiate remote diagnosis with other diagnostic tools equipped with this module. Tap Remote Diagnostic, then choose:
- REQUEST CONTROL REMOTE DEVICE: To control a partner's device.
- INVITE REMOTE DIAGNOSE ASSISTANT: To invite a technician to control your tool.
During remote diagnosis, you can send voice messages. A report is generated upon completion, which can be sent to the partner.
5.4.4 Launch Remote Diagnosis (Device-To-PC):
Request remote control from a PC client technician.
- Slide the switch to ON to allow connection.
- Notify the partner of the PC client website (http://remote.x431.com).
- The partner inputs their official technician account and password.
- The partner enters your device's Serial Number to start remote diagnosis.
Note: During remote diagnosis, avoid executing actions on your device. The partner cannot save diagnostic reports or records on your tablet.
5.5 Service (Reset) Functions
This module provides quick access to commonly performed maintenance and reset functions, including coding, reset, and relearn procedures.

Image: Visual representation of various reset functions available, including IMMO Reset, Gear Learning, Throttle Matching, and more.
- Oil Reset Service: Resets the engine oil life system after an oil change.
- Electronic Parking Brake Reset: Resets the brake pad after replacement.
- Steering Angle Calibration: Resets the steering angle after replacing sensors or mechanical parts, or after alignment.
- ABS Bleeding: Performs bi-directional tests for the Anti-lock Braking System, necessary when ABS contains air or components are replaced.
- Tire Pressure Monitor System Reset: Looks up tire sensor IDs, resets tire pressure, and turns off the TPMS MIL.
- Gear Learning: Performs tooth learning for the car, turning off the MIL, necessary after ECU/crankshaft sensor/flywheel replacement.
- Injector Coding: Writes or rewrites injector codes for accurate cylinder injection quantity control, necessary after ECU or injector replacement.
- Battery Maintenance System Reset: Resets the monitoring unit of the vehicle battery, clearing low battery fault information and performing battery matching.
- Diesel Particulate Filter (DPF) Regeneration: Clears PM from the DPF filter to stabilize performance, necessary after sensor/trap/nozzle/oxidizer replacement or when MIL is on.
- Electronic Throttle Position Reset: Makes initial settings to throttle actuators and returns learned values to default.
- EGR Adaption: Learns the EGR valve after cleaning or replacement.
- Gearbox Matching: Completes self-learning of the gearbox to improve shift quality.
- AdBlue Reset (Diesel Engine Exhaust Gas Filter): Required after diesel exhaust treatment fluid is replaced or filled.
- Transport Mode: Deactivates transport mode to restore normal vehicle functions (e.g., speed limit, remote key).
- Windows Calibration: Performs door window matching to recover ECU initial memory and automatic ascending/descending functions.
- Additional Functions: FRM Match, ECU Reset, Clutch Match, Gateway Module Data Calibration, Rain Light Sensor, Turbo Match, AC System Relearn, Headlamp, Air Level Calibration, Coolant Bleeding, Crank Position Sensor Adaptive Learning, Engine Power Balance, GPF Regeneration, HV Battery Diagnostics, Intelligent Cruise Control System, Language Change, Motor Angle Calibration, Nox Sensor Reset, Seat Occupancy Calibration, Stop/Start Reset, Sunroof Reset, Tire Reset.
5.6 Diagnostics Toolbar
The diagnostics toolbar, located in the upper right corner of the screen, provides buttons for various operations during a diagnostic session:
- Home: Returns to the Job menu screen.
- Print: Prints the current screen (requires wireless printer configuration).
- Exit: Exits the diagnostic application.
6. Maintenance and Updates
6.1 Software Update
This module allows you to update diagnostic software, applications, and frequently used software.
6.1.1 Update Diagnostic Software & APP:
- Go to Software Update on the Job Menu.
- Tap the Car model tab to view a list of vehicle diagnostic software.
- Tap Update to start downloading and installation.
6.1.2 Update IMMO&IMMO PROG Software:
If you only need to update IMMO&IMMO PROG software, go to Software Update and tap the IMMO tab.
6.2 Renew Subscription
If your software subscription is due or expires, the system will prompt you to renew it. Tap Renewal on the bottom of the screen to access payment options.
Note: The manual mentions PayPal, Subscription Renewal Card, and Credit Card as payment methods. Follow on-screen instructions for each.
6.3 Diagnostic Software Clear
This feature allows you to hide or clear diagnostic software that is not frequently used.
Note: Removing software may permanently delete it from the tablet. Use this feature to free up space if the tablet runs out of storage.
7. Other Modules and User Information
7.1 Toolbox
The Toolbox provides access to various optional add-on modules:
- BST360 (Battery Tester): For faster battery detection (requires specific Bluetooth battery tester, sold separately).
- Videoscope: For inspecting unseen parts of the engine, fuel tank, or braking system (requires compatible Videoscope device, sold separately).
- S2-2 Sensorbox: Diagnoses and simulates vehicle sensor faults (requires compatible S2-2 Sensorbox, sold separately).
- S2-2 Multimeter: Measures physical parameters like voltage, resistance, and frequency (uses same hardware as S2-2 Sensorbox).
Note: For more details on each module, refer to their respective user manuals.
7.2 User Info
This function allows users to manage personal information and VCI devices.
- My Report: View, delete, or share saved diagnostic reports. DTC results saved from the Read Trouble Code page are listed under Health Reports.
- VCI: Manage activated VCI devices. If multiple VCIs are activated, you may need to log out and log in with the correct account.
- VCI Management: Deactivate pairing with a VCI device via Bluetooth.
- Activate VCI: Activate the VCI device if the initial activation step was skipped during product sign-up. Input Serial Number and Activation Code.
- Firmware Fix: Upgrade and fix diagnostic firmware. Do not cut power or switch interfaces during this process.
- My Order: Check the status of all your orders.
- Subscription Renewal Card: Check the status of your subscription renewal card by inputting the 12-digit number.
- Profile: View and configure personal information. Tap the user image to change it, or tap next to "Upgrade Period" to check diagnostic software due dates.
- Change password: Modify your login password.
- Settings: Configure application settings and view software version information.
- Units: Set measurement units (Metric System or English System).
- Shop Information: Define your shop details (Workshop, Address, Telephone, Fax, License Plate). This information will be automatically generated in diagnostic reports.
- Printer Set: Establish wireless connection with a Wi-Fi printer. Supports LAUNCH® Wi-Fi Printer and external System printers.
- Orientation: Set screen display orientation.
- Clear Cache: Clear App cache, which restarts the App.
- About: View software version information and disclaimers.
- Device Account Management: Manage sub-accounts, allowing multiple users to use the VCI connector. Sub-accounts have a one-year validity period and can be added/removed by the main account.
8. Troubleshooting (FAQ)
8.1 How to save power?
- Turn off the screen when the tool is idle.
- Set a shorter standby time.
- Decrease the screen brightness.
- Turn off WLAN connection if not required.
- Disable GPS function if GPS service is not in use.
8.2 Communication error with vehicle ECU?
Confirm the following:
- Is the diagnostic connector correctly connected?
- Is the ignition switch ON?
- If all checks are normal, use the Feedback feature to send vehicle year, make, model, and VIN number to support.
8.3 Failed to enter into vehicle ECU system?
Confirm the following:
- Is the vehicle equipped with this system?
- Is the VCI dongle correctly connected?
- Is the ignition switch ON?
- If all checks are normal, use the Feedback feature to send vehicle year, make, model, and VIN number to support.
8.4 What to do if the language of vehicle diagnostic software does not match the system language?
English is the default system language. After setting your preferred system language, go to the update center to download the corresponding vehicle diagnostic software. If the software still displays in English, it indicates that the software for your chosen language is under development.
8.5 How to retrieve the login password?
- Launch the application from the home screen.
- Tap Login on the upper right corner.
- Tap Retrieve password and follow the on-screen instructions.
9. Specifications
9.1 Display Tablet Technical Parameters
| Parameter | Specification |
|---|---|
| Operating system | Android 10.0 |
| Memory (RAM/ROM) | 4GB/64GB |
| Processor | 4-Core, 2.0GHz |
| Screen Size | 8 inch capacitive touch screen |
| Display resolution | 1280*800 pixels |
| Camera | Rear-facing 8.0MP camera |
| Battery | 6300mAh Built-in Battery |
| Connectivity | Wi-Fi (802.11a/b/g/n/ac), Bluetooth |
| Working temperature | 0°C ~ 50°C |
| Storage temperature | -20°C ~ 70°C |
| Product Dimensions | 234*166*39.5(mm) |
9.2 VCI Connector Technical Parameters
| Parameter | Specification |
|---|---|
| Working voltage | 9~18V |
| Power consumption | <2.0W |
| Working temperature | -10°C ~ 50°C |
| Relative humidity | 20% ~ 90% |
9.3 Package List
The following list is for reference only; actual accessories may vary by destination. Consult your seller or the packing list provided with the tool.
| No. | Item | Description | Quantity |
|---|---|---|---|
| 1 | Display tablet | Main diagnostic and display unit. | 1 |
| 2 | VCI connector | Device for accessing vehicle data. | 1 |
| 3 | Diagnostic cable | Connects VCI to vehicle's OBD II diagnostic socket. | 1 |
| 4 | Password envelope | Contains product Serial Number and Activation Code. | 1 |
| 5 | X-PROG 3 immobilizer programmer kit | Includes X-PROG 3 immobilizer programmer and accessories. | 1 |
| 6 | Power adaptor | Charges the tablet via AC outlet. | (Optional) |
| 7 | Type-A to Type-C USB cable | Connects diagnostic tool to AC outlet/PC for charging/data exchange, or VCI to diagnostic tool. | 1 |
| 8 | Battery clamps cable | Supplies power to non-16pin connector from vehicle's battery. | (Optional) |
| 9 | Cigarette lighter cable | Supplies power to non-16pin connector from cigarette lighter receptacle. | (Optional) |
| 10 | OBD I adaptor box | Connects diagnostic cable and non-16pin adaptor cable. | (Optional) |
| 11 | Non-16pin adaptor cable kit | Contains various non-16pin connectors for different vehicle diagnostic sockets. | (Optional) |
10. User Tips
Based on common user inquiries and best practices, here are some tips for optimizing your experience with the Launch X431 IMMO Elite:
- Battery Conservation: To maximize battery life, always turn off the screen when the tool is idle, set a shorter standby time, and reduce screen brightness. Disable Wi-Fi and GPS functions when not actively in use.
- Stable Connections: For reliable communication with the vehicle ECU, ensure all diagnostic connectors are securely attached and the vehicle's ignition is consistently ON during diagnostic procedures.
- Software Updates: Regularly check for and install software updates for both the diagnostic software and IMMO/IMMO PROG software. This ensures compatibility with the latest vehicle models and access to new features.
- Password Management: If you forget your login password, utilize the "Retrieve password" function available on the login screen.
- Language Settings: If your diagnostic software language doesn't match your system language, download the corresponding language software from the update center after setting your preferred system language.
- Troubleshooting Communication: If you encounter communication errors or fail to enter the vehicle ECU system, first verify all physical connections and ignition status. If issues persist, use the "Feedback" feature to provide vehicle details to support for assistance.
- X-PROG 3 Usage: For advanced immobilizer programming (IMMO PROG), ensure the X-PROG 3 is correctly connected and its specific user manual is consulted for detailed operations.
11. Warranty and Customer Support
11.1 Warranty Information
LAUNCH electronic products are warranted against defects in materials and workmanship for one year (12 months) from the date of delivery to the user. This warranty is limited to persons who purchase LAUNCH products for resale or use in the ordinary course of business.
Warranty Exclusions: This warranty does not cover any part that has been abused, altered, used for a purpose other than its intended use, or used in a manner inconsistent with instructions. LAUNCH is not liable for consequential or incidental damages.
The exclusive remedy for any defective automotive meter is repair or replacement. Final determination of defects will be made by LAUNCH according to stipulated procedures.
11.2 Customer Service
For any questions regarding the operation of the unit, please contact your local dealer or customer service center:
- Telephone: 86-755-25938674
- E-mail: DOD@cnlaunch.com