1. Important Safety Information
- Read all instructions carefully before installation and use.
- Ensure power is turned off at the circuit breaker before installation or maintenance.
- Installation should be performed by a qualified electrician if you are unsure.
- Do not modify the fixture or its components.
- Keep the fixture away from water and moisture.
- California Proposition 65 Warning: This product contains Nickel (Metallic), a chemical known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
2. Product Overview
The FANPINFANDO Modern Dimmable LED Flush Mount Ceiling Lamp (Model 1213) is a stylish and functional lighting solution designed for living rooms, bedrooms, dining rooms, and foyers. It features a tool-free modular assembly, premium electroplated finishes, smart dimming with remote control, and durable aluminum construction.
Video: Product demonstration showcasing various light modes and dimming capabilities.
3. Setup and Installation
This fixture features a tool-free modular assembly designed for quick and easy installation, typically within 15 minutes for one person. No professional electrician is required for standard installation.
3.1 Package Contents
Before starting, ensure all parts are present:
- Lamp body components (right angles, middle tube, disc)
- Mounting hardware (screws, tooth rods)
- Wiring board
- Remote control
- Crystals (1 piece)
- Instruction manual
3.2 Assembly Steps
Refer to the diagram below for visual guidance during assembly.

Image: Detailed diagram showing the assembly steps for the ceiling lamp.
- Unpack Accessories: Carefully remove all components from the packaging.
- Attach Right Angles: Secure the right-angle lamp arms to the main fixture base. Some may be fixed with screws, others with tooth rods. Ensure they are firmly in place.
- Fix Middle Tube & Disc: Attach the central middle tube and disc component to the main fixture.
- Connect Wiring Board: Properly connect the wiring board according to the markings. Ensure all connections are secure.
- Attach Crystals: Install the decorative crystal piece to the designated spot on the fixture.
3.3 Mounting the Fixture
This is a surface-mounted fixture.
- Ensure the power supply to the installation area is turned OFF at the circuit breaker.
- Mark the drilling points on the ceiling using the fixture's mounting bracket as a template.
- Drill holes and insert appropriate anchors (if necessary).
- Connect the fixture's wires to your household wiring (Live, Neutral, Ground) according to local electrical codes.
- Secure the fixture's mounting bracket to the ceiling.
- Attach the assembled lamp body to the mounting bracket.
- Restore power and test the light.
4. Operating Instructions
Your ceiling lamp can be operated using the included RF remote control or a smart mobile application.
4.1 Remote Control Functions
The RF remote control allows you to adjust brightness and color temperature, and switch between various lighting modes. It operates through walls up to 15 meters away.

Image: Remote control layout, pairing instructions, and smart app setup guide.
- ON/OFF: Power the light on or off.
- Color Temperature Adjustment: Switch between Warm Light (3000K), Neutral Light (4500K), and Cool White (6000K).
- Dimming: Adjust brightness from 10% to 100%.
- Night Light Mode: Activates a very low brightness setting for night use.
- Small Night Lamp Button: Specific button for a low light setting.
- Expanding Auxiliary Function: Additional functions as indicated on the remote.
4.2 Remote Control Pairing
- Install batteries into the remote control first.
- Turn on the AC power to the lamp.
- Within 5 seconds of turning on the AC power, press the pairing button (often marked with a Wi-Fi or signal icon) on the remote control.
- The light will flash for 3 seconds, indicating successful pairing.
4.3 Smart App Control
You can control your lamp using the Smart Life Pro app.
- Download App: Scan the QR code provided in the manual or on the product image to download the 'Smart Life Pro' app (available for iOS and Android).
- App Language Setup: Open the app. Tap on the top left corner to access settings, then select 'Language' to switch to your preferred language.
- Customize Fixture Name: Tap on the fixture icon. You can customize the fixture name (default or AI-generated). Enter your desired name and save.
- App Pairing:
- Go back to the main interface of the app and tap the customized name of your lamp.
- Ensure the fixture is powered on.
- Within 5 seconds of powering on the lamp, tap the 'Remote/App Pairing' button within the app.
- The light will blink, indicating successful pairing.
5. Maintenance
- Cleaning: To clean the fixture, ensure power is off. Use a soft, dry cloth to wipe away dust. For more stubborn marks, a slightly damp cloth with mild soap can be used, followed by drying with a clean cloth. Avoid abrasive cleaners or solvents.
- Material Care: The fixture is made of aluminum alloy with an electroplated finish (Gold, Chrome) or electrostatic powder-coated (Matte Black). These finishes are designed to resist fingerprints and tarnishing.
- LED Lifespan: The integrated LEDs are designed for long life (over 10,000 hours) and do not require replacement.
6. Troubleshooting
- Light does not turn on:
- Check if the power supply is connected and the circuit breaker is on.
- Ensure all wiring connections are secure.
- If using the remote, check its batteries.
- Remote control not working:
- Check if the remote control batteries are exhausted and replace them if necessary.
- Ensure the remote is paired correctly (refer to Section 4.2).
- Pairing issues (remote or app):
- Ensure you are pressing the pairing button within 5 seconds of turning on the AC power to the lamp.
- Try turning the power off and on again, then re-attempt pairing.
- Light flickers:
- Ensure the voltage supply is stable and within the specified range (90-260V).
- Check for loose wiring connections.
- App control not working:
- Ensure your smartphone's Bluetooth/Wi-Fi is enabled and the app has necessary permissions.
- Verify the lamp is correctly paired with the app (refer to Section 4.3).
- Check your home Wi-Fi connection if the app relies on it (common for smart devices).
7. Specifications

Image: Diagram showing product dimensions and key specifications.
| Attribute | Specification |
| Brand Name | FANPINFANDO |
| Model Number | 1213 |
| Item Type | Ceiling Lights |
| Style | Modern Style |
| Installation Type | Surface Mounted |
| Body Material | Aluminum |
| Finish | Polished Chrome, Gold, Matte Black |
| Light Source | LED Bulbs (Included) |
| Number of Light Sources | 6 |
| Is Dimmable | Yes |
| Switch Type | Remote Control |
| Voltage | 90 - 260 V AC |
| Power (Watts) | 45W |
| Luminous Flux | 5200 Lumens (2000-82000 range) |
| CRI | >=80 |
| Color Temperature | Adjustable 3000K (Warm) - 6500K (Cool) |
| Dimming Range | 10% - 100% |
| Lighting Area | 10-15 square meters (120-150 square feet) |
| Dimensions | Diameter: 82cm (32.3"), Height: 15cm (5.9"), Base: D18cm x H4cm |
| Product Weight | 2.5 kg |
| Package Box Dimensions | 48cm x 33cm x 8cm |
| Certifications | CCC, CE, CQC |
| High-Concerned Chemical | Nickel (Metallic) |
8. Warranty and Support
8.1 Warranty
This product comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
8.2 Additional Resources
For a downloadable PDF version of the user manual, please refer to the official product page or download it directly from: User Manual (PDF).
9. User Tips
- Remote Control Batteries: Always ensure your remote control has fresh batteries for optimal performance and reliable pairing.
- Pairing Timing: When pairing the remote or app, be sure to initiate the pairing sequence within 5 seconds of turning the lamp's power on for the best chance of success.
- App Permissions: If using the smart app, ensure it has all necessary permissions on your smartphone (e.g., Bluetooth, local network access) to function correctly.
- Power Cycle for Reset: If you experience any unusual behavior, try turning the lamp off at the main power switch for 10 seconds, then turn it back on. This can often resolve minor glitches.