Introduction
The SANPKON R-456 LED Red Light Infrared Therapy Belt is designed to provide targeted red light (660nm) and near-infrared light (850nm) therapy. This device combines both wavelengths to offer therapeutic benefits for various body areas, aiding in pain relief, muscle recovery, and skin rejuvenation. It features adjustable intensity, timing, and wavelength settings for a personalized therapy experience.

Figure 1: SANPKON Red Light Therapy Belt in use on the lower back.
How Red and Near-Infrared Light Therapy Works
The device utilizes specific wavelengths of light to penetrate different layers of the skin and tissue:
- Red Light (660nm): Primarily absorbed by the epidermis and dermis, it helps with skin benefits and surface-level issues.
- Near-Infrared Light (850nm): Penetrates deeper into the subcutaneous tissue, reaching muscles and joints for more profound therapeutic effects.

Figure 2: Illustration of infrared heat penetration.

Figure 3: Diagram of light wave penetration into skin layers.
Package Contents
- 1 x SANPKON LED Red Light Infrared Therapy Belt
- 1 x Power Adapter (Available in EU, US, or UK plug type)
- 1 x Controller
- 1 x Instruction Manual (This document)

Figure 4: Included components in the product package (UK plug version shown).
Setup Instructions
- Unpack all components from the box.
- Locate the LED Light therapy belt and the controller cable.
- Connect the male connector from the therapy belt to the female connector on the controller cable. Ensure proper orientation by aligning the arrow indicators on both connectors and insert firmly.
- Connect the power adapter to the controller cable.
- Plug the power adapter into a suitable electrical outlet (AC 100-240V).
- Alternatively, for portable use, connect a 5V power bank to the controller using a USB booster cable (not included).

Figure 5: Correct connection of the male and female connectors.
Operating Instructions
The device is operated using the attached 4-key controller. Familiarize yourself with the controller buttons:
- Power Button (
): Turns the device On/Off, and cycles through pulse modes (10Hz/40Hz Pulse Mode, H (Breathe Mode)). - Brightness Adjustment Button (
): Adjusts light intensity (L1 to L5). - Timing Setting Button (
): Sets treatment duration (5, 10, 15, 20, 25, 30 minutes, or 'On' for continuous). - Wavelength Switching Button (
): Selects light wavelength (ALL (660nm+850nm), Only 660nm, or Only 850nm).
Step-by-Step Operation:
- Power On: Press the Power Button (
) to turn on the device. The digital screen will illuminate. - Adjust Brightness: Press the Brightness Adjustment Button (
) to cycle through 5 intensity levels (L1 to L5). It is recommended to start with a lower setting (L1-L2) and gradually increase over 1-2 weeks as your body adjusts. - Set Treatment Time: Press the Timing Setting Button (
) to select your desired treatment duration (5, 10, 15, 20, 25, 30 minutes, or 'On' for continuous operation). For initial use, start with 10 minutes, increasing to 20 minutes after one week, and 30 minutes after two weeks of consistent use. Do not exceed 30 minutes on the same treatment area per session. - Select Wavelength: Press the Wavelength Switching Button (
) to choose between ALL (660nm Red Light + 850nm Near-Infrared Light), Only 660nm, or Only 850nm. - Select Pulse Mode (Optional): Press the Power Button (
) again after powering on to cycle through optional pulse modes (10Hz/40Hz Pulse Mode, H (Breathe Mode)). - Power Off: Press and hold the Power Button (
) to turn off the device after your session.

Figure 6: Visual guide to operating the therapy belt.

Figure 7: Detailed view of the controller functions.

Figure 8: Available time settings for therapy sessions.
Application Examples:

Figure 9: Therapy pad applied to the knee.

Figure 10: Therapy pad applied to the shoulder.
Maintenance
- Cleaning: Ensure the device is unplugged before cleaning. Wipe the surface of the therapy belt with a soft, slightly damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: When not in use, store the therapy belt flat in a cool, dry place away from direct sunlight and extreme temperatures. Do not fold or crease the belt violently.
- Water Exposure: This device is not waterproof. Avoid exposing it to water or other liquids.
Troubleshooting
- Device Not Turning On:
- Check if the power adapter is securely plugged into both the controller and the wall outlet.
- Ensure all cable connections (belt to controller, controller to adapter) are firm.
- Verify the power outlet is functional.
- Lights Not Illuminating:
- Confirm the device is powered on and the brightness level is not set to minimum.
- Note that 850nm near-infrared lights are invisible to the naked eye; they are working even if you don't see a red glow from them.
- Controller Not Responding:
- Ensure all connections are secure.
- Try unplugging and re-plugging the power adapter.
Specifications
| Model Number | R-456 |
| Brand | SANPKON |
| Product Name | LED Red Light Infrared Therapy Belt |
| Application | Body (Abdomen, Back, Knee, Hands, Shoulder, etc.) |
| LED Quantity | 120pcs (120x 660nm Red Lights, 240x 850nm Near-Infrared Lights) |
| Wavelengths | 660nm (Red Light), 850nm (Near-Infrared Light) |
| Power | Max 20W |
| Input Voltage | AC 100-240V |
| Output Voltage | DC 12V |
| Intensity Levels | 5 Levels (L1-L5) |
| Temperature Range | 37-58℃ (depending on intensity) |
| Timer Settings | 5, 10, 15, 20, 25, 30 minutes, or Continuous ('On') |
| LED Light Panel Size | 40.5 cm x 21.4 cm (approx. 15.9 x 8.4 inches) |
| Belt Dimensions | 90 cm (length) x 7.9 cm (width) (approx. 35.4 x 3.1 inches) |
| Product Weight | 0.60 KG (approx. 1.32 lbs) |
| Batteries Included | No |

Figure 11: Product dimensions.
User Tips & Precautions
- Consistency is Key: For best results, use the therapy belt consistently as recommended.
- Start Low, Go Slow: Begin with lower intensity and shorter durations, gradually increasing as your body adapts.
- Hydration: Ensure you are well-hydrated before and after therapy sessions.
- Not Waterproof: This device is not waterproof. Keep it away from water and liquids.
- Storage: Store the mat flat when not in use; avoid violent folding or creasing.
- Treatment Duration: Do not use for more than 30 minutes on the same treatment area per session.
- Consult a Doctor:
- Not intended for children.
- Pregnant women should not use this device.
- If you have any specific health concerns or conditions, consult with your healthcare provider before using this product.
Warranty and Support
For warranty information, technical support, or any product-related inquiries, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.