coolo Smart Water Leak Sensor

Contents

Coolo Zigbee Water Leak Sensor User Manual

Model: Smart Water Leak Sensor

1. Introduction

The Coolo Smart Water Leak Sensor is designed to detect water leakage and flooding in your home, providing timely alerts to prevent potential water damage. This device integrates with Zigbee networks, offering smart monitoring capabilities for various scenarios such as kitchens, bathrooms, and utility areas. It features a high-intensity siren (on siren-equipped models) and app notifications for comprehensive home security.

Coolo Zigbee Water Leak Sensor with Tuya and Smart Life app compatibility logos
Figure 1: Coolo Zigbee Water Leak Sensor, compatible with Tuya and Smart Life applications.

2. Specifications

Feature Detail
Product Name Smart Water Leak Sensor
Operating Current ≤80mA
Standby Current ≤10uA; 15uA
Standby Time ≥12 Months
Built-in Siren ≥110dB (with siren type)
Power Input DC3V LR03 (battery not included)
Operating Temperature -10°C - 55°C
Operating Humidity 0% ~99% RH
Product Size (with siren) 72x32x24mm
Product Size (no siren) 70x25x20mm
Line Length 1 meter
Communication Protocol Zigbee 3.0 (requires Zigbee gateway)
App Compatibility Smart Life/Tuya; Home Assistant Zigbee2MQTT (Z2M)
Certifications CE, RoHS
Smart Home Platform Tuya

3. Package Contents

The package typically includes:

  • Smart Water Leak Sensor (with or without siren, depending on model)
  • Water detection probe with 1-meter cable
  • User Manual (PDF version available online)

Note: LR03 batteries (DC3V) and a Zigbee gateway are not included and must be purchased separately.

4. Safety Information

  • Do not expose the device to extreme temperatures or humidity outside its operating range.
  • Keep the device away from direct sunlight and heat sources.
  • Do not attempt to disassemble or repair the device yourself. Contact support if issues arise.
  • Ensure proper battery installation according to polarity markings.
  • Dispose of batteries responsibly according to local regulations.

5. Setup and Installation

5.1 Network Connection

This device requires a Zigbee gateway/hub for operation. It does not connect directly to Wi-Fi.

  • For Tuya Zigbee version: Supports both Tuya/Smart Life App and Home Assistant Zigbee2MQTT (Z2M). A Tuya Zigbee gateway/hub is required.
  • For Z2M version: Only supports Home Assistant Zigbee2MQTT. It is not compatible with ZHA (Zigbee Home Automation) or Tuya/Smart Life App.

Ensure your Zigbee gateway is properly set up and connected to your network before attempting to pair the sensor.

Network connection diagram for Zigbee water sensor with Zigbee Hub, WiFi Router, and Tuya Cloud services
Figure 2: Network connection diagram showing the sensor connecting via a Zigbee Hub to cloud services.
Diagram showing Zigbee2MQTT compatibility, explicitly stating incompatibility with Tuya and Smart Life apps for this protocol
Figure 3: Compatibility details for Zigbee2MQTT protocol.

5.2 Physical Placement

Place the detector in any area where water leakage is a concern. Common locations include:

  • Under sinks in kitchens and bathrooms
  • Near dishwashers, washing machines, and water heaters
  • Basements or utility rooms
  • Near drain pipes or toilets to prevent overflows

Important: The water detection probe should be positioned so that it does not touch the ground directly. It should be at least 0.5mm above the ground to accurately detect leaks without false alarms from condensation or minor dampness.

Water leak detector with precision 0.5mm gap sensing, installed in a bathroom
Figure 4: Proper placement of the sensor with 0.5mm gap sensing.
Multi-scenario home security applications for the water leak sensor in kitchen, bathroom, drain pipe, and toilet areas
Figure 5: Examples of sensor placement in various home scenarios.

6. Operating Instructions

6.1 Water Leakage Detection

When the sensor detects water leakage, it will trigger an alert. For models equipped with a siren, a loud alarm will sound (≥110dB). Simultaneously, a warning message will be sent to your connected smartphone application (Smart Life/Tuya or Home Assistant Z2M).

Detailed view of the smart water leak detector with siren, highlighting features like cloud sync, loud alarm, and dual-prong metal sensor
Figure 6: Key features of the Smart Water Leak Detector with Siren.

6.2 Siren Operation (Siren Models Only)

  • Adjusting Alarm Tone: On siren-equipped models, you can switch the alarm tone by clicking the "SET" button on the device. Alternatively, you can adjust the alarm tone through commands within the application.
  • Alarm Duration: The default playback duration for the factory alarm sound is 60 seconds. This duration can be customized and adjusted via the application settings.
App interface showing adjustable siren settings for sound volume and alarm duration
Figure 7: App interface for adjusting siren settings.

6.3 App Functionality

The connected application provides real-time online functionality, allowing you to:

  • Remotely issue instructions to the sensor, such as silencing the siren.
  • View all alert records and historical daily logs.
  • Set up automated scenarios for interconnection with other smart devices.
  • Monitor battery levels and receive low battery reminders.
App screenshot displaying full historical daily logs of water leak events
Figure 8: Historical daily logs accessible via the app.
Image illustrating two main monitoring modes: water leakage monitoring and low water level monitoring
Figure 9: Two main monitoring modes: water leakage and low water level.

7. Maintenance

7.1 Battery Replacement

The sensor is powered by DC3V LR03 batteries. When you receive a low battery reminder message through the application, it is crucial to replace the batteries promptly to ensure continuous operation and protection.

App notification for low battery reminder and battery settings
Figure 10: Low battery reminder and app settings.

7.2 Cleaning

Wipe the sensor and probe with a dry, soft cloth. Do not use abrasive cleaners or immerse the device in water.

8. Troubleshooting

  • Device not connecting: Ensure you have a compatible Zigbee gateway/hub. Verify the correct protocol version (Tuya Zigbee vs. Z2M) for your setup. The device cannot connect directly to Wi-Fi.
  • No siren sound: Confirm you have a model with a built-in siren. Check app settings for siren volume and duration.
  • False alarms: Ensure the probe is not touching the ground directly; maintain at least a 0.5mm gap.
  • No app notifications: Check your phone's notification settings for the Smart Life/Tuya or Home Assistant app. Ensure the sensor has sufficient battery.
  • Inconsistent operation: Verify the Zigbee signal strength to the hub. Replace batteries if a low battery reminder has been received.

9. User Tips

  • When using Home Assistant, Zigbee2MQTT (Z2M) is generally recommended over ZHA for this sensor.
  • The siren, when present, is loud and effective. Remember that its sound and duration can be adjusted via the app.
  • The option to sound an alarm independently of Home Assistant can be useful for immediate local alerts.
  • Upon receiving the device, it is advisable to test the siren functionality to ensure it is working as expected.
  • Regularly check the app for low battery reminders to maintain continuous protection.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official Coolo website or contact your retailer. Keep your proof of purchase for any warranty claims.

A detailed user manual in PDF format is available for download from the product page or by contacting customer support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.