1. Introduction
Thank you for purchasing the HOMEFISH MY-01 Mini Wireless Electric Food Processor. This versatile appliance is designed to simplify your food preparation tasks, from mincing garlic and chili to grinding meat and vegetables. Please read this manual carefully before use to ensure safe and efficient operation.

Figure 1: HOMEFISH MY-01 Mini Wireless Electric Food Processor - A good cooking helper for baby food supplements and more.
2. Important Safety Precautions
- Electrical Safety: Ensure the voltage of the power supply matches the rated voltage indicated on the product label. Do not use the appliance with a damaged power cord or plug. If the cord is damaged, it must be replaced by the manufacturer, its service agent, or a qualified electrician to avoid electrical hazards.
- Usage Safety: Keep hands, hair, and loose clothing away from the feeding tube and rotating parts during operation. Never insert fingers, utensils, or other objects into the feeding tube while the machine is running. Always use the provided pusher to guide food into the processor.
- Children and Pets: Keep the food processor out of the reach of children and pets when in use or stored. This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, unless they are supervised by a responsible person and have received instructions on how to use the appliance safely.
- Overload Protection: Do not overload the machine by forcing too much food into the feeding tube at once. Allow the processor to process food at a steady pace to prevent motor overheating or jamming.
- Cleaning and Maintenance: Always unplug the appliance from the power outlet before cleaning, disassembling, or performing maintenance. Do not immerse the motor base in water or any other liquid to avoid electrical shock.
3. Product Components
| Component Name | Description |
|---|---|
| Motor Base | Contains the motor and power control; the main body of the appliance. |
| Grinding Head / Processing Bowl | Includes the processing chamber, blade, and lid; processes food into desired fineness. |
| Cutting Blade | S-shaped stainless steel blade for efficient chopping and grinding. |
| Lid | Covers the processing bowl during operation. |
| USB-C Charging Port | For recharging the internal battery. |

Figure 2: Easy disassembly of components for cleaning.
4. Setup
4.1. Preparation
- Unpack the product and check if all components are intact and free from damage.
- Wash the processing bowl, lid, and cutting blade with warm soapy water. Rinse thoroughly and dry completely before assembly.
- Ensure the motor base is clean and dry.
4.2. Assembly
- Place the motor base on a stable, flat surface.
- Carefully place the cutting blade onto the central pin inside the processing bowl. Ensure the blade is firmly seated.
- Align the processing bowl with the motor base and twist clockwise to lock it securely in place.
- Place the lid onto the processing bowl, ensuring it is properly aligned and sealed.
5. Operating Instructions
5.1. Processing Food
- Ensure the unit is fully assembled as per Section 4.2.
- Cut food ingredients into small pieces (approximately 2cm x 2cm) that can easily fit into the processing bowl. Remove any bones, hard seeds, or tough connective tissue as they may cause jamming or damage the blade.
- Place the prepared ingredients into the processing bowl. Do not overfill; ensure ingredients are below the maximum fill line.
- Securely place the lid on the processing bowl.
- Press and hold the power button on the motor base to start processing. Release the button to stop. For best results, use short pulses to achieve desired consistency.
- After processing, release the button, wait for the blade to stop completely, then carefully remove the lid and pour out the processed food.

Figure 3: Press and hold the button to start processing meat filling.
5.2. Charging
- When the battery is low, the indicator light may flash or the unit may stop operating.
- Connect the provided USB-C cable to the charging port on the motor base and plug the other end into a suitable USB power adapter (not included).
- The indicator light will show charging status (e.g., red for charging, green for fully charged).
- Once fully charged, disconnect the charging cable.

Figure 4: USB-C charging interface for long-lasting range.
6. Cleaning and Maintenance
6.1. Disassembly
- Ensure the machine is turned off and unplugged from any charging source.
- Remove the lid from the processing bowl.
- Carefully remove the cutting blade from the processing bowl.
- Twist the processing bowl counterclockwise to detach it from the motor base.
6.2. Cleaning
- Wash all detachable components (processing bowl, lid, cutting blade) with warm soapy water. Use a brush to remove stubborn food residues from the blade.
- Do not use abrasive cleaners, steel wool, or sharp objects to clean the components, as they may scratch the surface.
- Rinse all components thoroughly with clean water to remove soap residue.
- Dry all parts completely with a clean towel or allow them to air dry before storage.
- Wipe the motor base with a damp cloth; do not immerse it in water.
6.3. Storage
- Store the machine and all components in a clean, dry place, away from direct sunlight and heat sources.
- To save space, you can disassemble the components and store them in a storage bag (if provided) or a sealed container.
- Ensure the blade is stored in a safe place to avoid accidental cuts.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not start | 1. Battery is low. 2. Overload protection has been triggered. | 1. Charge the unit fully. 2. Unplug the machine, wait 30 minutes for the motor to cool down, then restart. Reduce the amount of food. |
| Food is not processing smoothly | 1. Food pieces are too large or contain hard elements. 2. Processing bowl is overloaded. 3. Blade is dull or not installed correctly. | 1. Cut food into smaller pieces and remove hard elements. 2. Reduce food quantity. 3. Check the blade; sharpen or replace if necessary, and ensure it is properly seated. |
| Machine makes abnormal noise | 1. Components are not assembled correctly. 2. Blade is damaged. 3. Motor is overloaded. | 1. Disassemble and reassemble all components according to instructions. 2. Inspect the blade for damage; replace if needed. 3. Reduce the amount of food being fed into the machine. |
| Food leaks from the processing bowl | 1. Lid is not tightened properly. 2. Processing bowl is not installed correctly. | 1. Ensure the lid is securely closed. 2. Reassemble the processing bowl to ensure a secure fit. |
8. Specifications
| Feature | Detail |
|---|---|
| Product Name | Electric Food Ingredient Processor |
| Model | MY-01 |
| Brand | HOMEFISH |
| Voltage | 3.7V |
| Power | 45W |
| Material | PP Material (Food Grade) |
| Capacity | Approximately 350ml |
| Dimensions (H x W) | 13.5 cm x 10.2 cm |
| Blade Type | S-shaped Stainless Steel |
| Charging Interface | USB Type-C |

Figure 5: Product parameters and dimensions.
9. User Tips
No specific user tips are available at this time.
10. Warranty and Support
This HOMEFISH food processor comes with a [1-year] warranty from the date of purchase. The warranty covers manufacturing defects in materials and workmanship. It does not cover damage caused by improper use, misuse, neglect, accidental damage, or unauthorized repairs. To claim the warranty, please retain the original purchase receipt and contact our customer service team with details of the defect.
For further assistance or inquiries, please contact:
- Customer Service Hotline: [Phone Number]
- Email: [Email Address]
- Website: [Website URL]