Milfra m26d

Contents

Milfra Smart Switch User Manual

Model: M26D-1/2/3/4/6 (Zigbee & WiFi Versions)

1. Introduction

Thank you for choosing the Milfra Smart Switch. This device allows you to control your lighting remotely via WiFi or Zigbee protocols, offering convenience through app control, voice commands, and scheduling. It is compatible with popular smart home platforms like Amazon Alexa, Google Home, and Tuya Smart Life. This manual provides essential information for safe installation, setup, and operation of your smart switch.

Milfra 6 Gang Smart Switch with Zigbee and WiFi logos, indicating neutral wire requirement and compatibility with Alexa, Google Assistant, Tuya, and SmartLife.
Milfra Smart Switch (6-gang version) highlighting Zigbee/WiFi compatibility and smart assistant integration.

2. Safety Information

WARNING: Risk of Electric Shock!

  • Always cut off the power at the circuit breaker before installation, maintenance, or removal of the switch.
  • Installation should only be performed by a qualified electrician or person with electrical wiring experience.
  • Ensure the power supply mode is Neutral+Live Wire. A neutral wire is required for operation.
  • Never connect the neutral wire to other wires on the switch.
  • Do not exceed the maximum load power: LED: Max 150W/Gang, Total Max: 600W; INC: Max 600W/Gang, Total Max: 2400W.
  • This device operates at low voltage (Below 50Vac or 75Vdc) as per EU LVD Voltage standards.

3. Specifications

Attribute Value
TypeSmart Light Switch
Model NumberM26D-1/2/3/4/6
Brand NameMilfra
Power Supply ModeNeutral+Live Wire
InputAC100-240V~, 50/60Hz
Wireless Frequency2.4GHz
Wireless StandardIEEE802.11 b/g/n (Wi-Fi)
Load Power (LED)Max 150W/Gang, Total Max: 600W
Load Power (INC)Max 600W/Gang, Total Max: 2400W
Product Size118x73x44MM (4.65x2.87x1.73 inches)
MaterialPlastic
Is Smart DeviceYes
Switch TypePush Button Switch
CertificationRoHS
EU LVD VoltageLow voltage: Below 50Vac or 75Vdc
High-concerned chemicalNone
Product dimensions diagram showing front, side, and back views with measurements in millimeters and inches, and a detailed wiring diagram for the smart switch.
Product dimensions and wiring diagram.

4. Setup and Installation

4.1 Pre-installation Notes

  • Only supports one-way/single pole circuits.
  • A neutral wire is required for installation.
  • The Zigbee version requires a Tuya Zigbee gateway (sold separately) for smart functionality.
  • If you are unsure about electrical wiring, consult a professional electrician.

4.2 Wiring Instructions

  1. Turn off Circuit Breaker: Locate your light's control in your circuit breaker and turn it off. Verify the power is off by flipping your switch a few times.
  2. Open the Cover: Use a small screwdriver to gently open the switch cover from the notch.
  3. Find the Neutral Wire: In the wall cassette, look for the neutral wire (usually white, secured with a wire nut).
  4. Label Your Wires: Mark or label the corresponding wires before disconnecting the old switch.
  5. Connect the Smart Switch: Connect the smart switch to your home wires, being careful to match live and neutral wires correctly.
  6. Install the Switch: Load the wall cassette and carefully put the switch into the wall.
  7. Attach the Faceplate: Securely attach the faceplate to the switch.
  8. Turn On Circuit Breaker: Turn on your circuit power from the circuit breaker.
Diagram showing the physical installation steps of the smart switch, including opening the cover, wiring, inserting into the wall, and attaching the faceplate.
Physical installation steps for the smart switch.

4.3 App Installation and Pairing

The smart switch requires the 'Smart Life' app for smart functionality. The app is compatible with mobile devices running iOS 8.0+ or Android 4.4+.

  1. Download the App: Search for "Smart Life" in the Apple App Store or Google Play, or scan the QR code provided in the original user manual (PDF) to install the app.
  2. Register/Login: Enter the registration interface, input your email address/phone number to get a verification code and register an account. If you already have a Smart Life account, simply log in.
  3. Network Requirements: The smart switch only supports a 2.4GHz WiFi network and will not work with 5GHz networks. Ensure your home network is 2.4GHz and your phone is connected to it.
  4. Enter Pairing Mode: Once the device is powered on, press and hold any on/off button on the switch for 5-7 seconds until the indicator light rapidly blinks.
  5. Add Device in App: Open the Smart Life APP, tap 'Add Device' (usually a '+' icon), and follow the on-screen instructions. Tap 'NEXT' when prompted.
  6. Confirm Indicator Light: Confirm that the network indicator light is rapidly blinking in the app.
  7. Complete Setup: Give a name to the switch and tap 'Completed'. The device you've named will be shown on the app's home screen.

5. Operation

5.1 Manual Control

The switch features durable and responsive push buttons for direct manual control of your lights.

Image showing a hand pressing one of the smart switch buttons, illustrating the push button functionality.
Manual control via push button.

5.2 Voice Control

Integrate your Milfra Smart Switch with Amazon Alexa or Google Home for convenient voice control. Once paired with the Smart Life app, link your Smart Life account to your preferred voice assistant app.

Example commands:

  • "Alexa, turn on the living room light."
  • "Hey Google, turn off the bedroom light."
A family interacting with a smart speaker, demonstrating voice control functionality with Alexa and Google Home for the smart switch.
Voice control with Alexa and Google Home.

5.3 Timing Control

Schedule your routines using the timer setup in the Smart Life APP. You can set specific times for lights to turn on or off, or create countdown timers for automated actions.

Screenshots from the Smart Life App showing options for scheduling and countdown timers to control lights, such as turning on bedroom lights after a countdown or at a specific time.
Timing control features in the Smart Life App.

5.4 Sharing and Grouping

The Smart Life APP allows you to share control of your devices with up to 10 family members. You can also combine multiple devices (e.g., living room bulbs, plugs, and switches) into groups for unified control with a single tap on your smartphone, providing more convenient access.

Screenshots from the Smart Life App demonstrating device sharing with family members and grouping multiple smart devices for unified control.
Device sharing and grouping features in the Smart Life App.

6. Indicator Light Meaning

Colour Status Description
GreenRapidly BlinksReady for connection (Default Mode Only) / Pairing to the phone App (Long press button mode only)
GreenSlowly BlinksReady for connection (AP Mode Only)
Light blueOffTurn the light off
MazarineOnTurn the light on
GreenFlashNetworking

7. Maintenance

To ensure the longevity and proper functioning of your Milfra Smart Switch:

  • Clean the switch surface regularly with a soft, dry cloth.
  • Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic finish.
  • Ensure the switch is not exposed to excessive moisture or extreme temperatures.

8. Troubleshooting

  • Switch not responding: Check if the circuit breaker is on. Ensure the switch is correctly wired with both live and neutral wires.
  • Indicator light not blinking for pairing: Ensure the switch is powered on. Press and hold any button for 5-7 seconds until the light rapidly blinks.
  • Cannot connect to WiFi: Verify your router is broadcasting a 2.4GHz network. The switch does not support 5GHz WiFi. Ensure your phone is connected to the 2.4GHz network during pairing.
  • Zigbee version not connecting: Ensure your Tuya Zigbee gateway is powered on, connected to your network, and within range of the switch.
  • Voice control not working: Confirm your Smart Life account is correctly linked to your Amazon Alexa or Google Home app. Check your internet connection.
  • If you can't find a neutral wire: This switch requires a neutral wire. If your existing wiring does not have one, you may need to consult an electrician to install one or consider a different type of smart switch that does not require a neutral wire.

9. User Tips

  • The switch is designed to fit standard switch boxes, including those commonly found in Korea.
  • For optimal performance, ensure your WiFi signal is strong in the area where the switch is installed.
  • Regularly check the Smart Life app for firmware updates to ensure your switch has the latest features and security enhancements.

10. Warranty and Support

For warranty information, technical support, or further assistance, please refer to the official Milfra website or contact your retailer. Keep your purchase receipt as proof of purchase.

A detailed user manual in PDF format is available for download. You can find it by searching for "Item guides & documents" on the product page or by visiting the manufacturer's support website.

© 2024 Milfra. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.