LINCUKOO TZHA

Contents

Lincukoo Tuya Zigbee3.0 Smart 3-in-1 Human Motion Presence Sensor User Manual

Model: TZHA

1. Product Overview

The Lincukoo Tuya Zigbee3.0 Smart 3-in-1 Human Motion Presence Sensor (Model: TZHA) is a versatile device designed for smart home automation. It integrates human motion detection, human presence monitoring, and a luminance sensor into a single unit. This sensor is compatible with Tuya and Home Assistant platforms, requiring a Zigbee gateway for operation, and supports Zigbee2MQTT.

Lincukoo 3-in-1 Human Motion Presence Sensor
Lincukoo 3-in-1 Human Motion Presence Sensor, showing compatibility with Tuya, MQTT, Home Assistant, and Zigbee 3.0.

Important Note: The TZ version of this sensor is designed exclusively for use with Tuya or Home Assistant platforms and requires a Zigbee gateway. It supports Zigbee2MQTT.

2. Setup Instructions

2.1. Powering on the Sensor

  1. Plug the Type-C cable into the sensor and connect it to a 5V DC power supply.
Sensor with Type-C power input
The sensor connected via Type-C 5V power input.

2.2. Device Pairing (Zigbee/Bluetooth Version)

Before pairing the sensor, ensure your Zigbee gateway is already set up and added to your smart home platform (e.g., Tuya Smart Life app or Home Assistant).

  1. Press and hold the button on the sensor for 5 seconds until the LED indicator blinks.
  2. Open your gateway's homepage in the Smart Life app or Home Assistant.
  3. Click "Search new device" or "Add Devices" and follow the in-app instructions to connect the sensor to your gateway.

2.3. Device Installation

Install the sensor in your desired location. The recommended installation height is between 1.8 to 2.5 meters for optimal performance.

Product Introduction and Quick Setup Diagram
Diagram illustrating the sensor's components (PIR sensor, LED, button, Type-C port) and quick setup steps.

3. Operating Instructions

3.1. App Settings Overview

Once connected, the device's homepage in the app will display detection status (if a person is detected) and current brightness. A switch in the upper right corner allows you to enable/disable detection.

3.2. Work Modes

The sensor offers three distinct working modes:

  1. Detect Motion: Only detects human movement.
  2. Monitor Presence: Only monitors if someone is present in the detection range for an extended period.
  3. Motion Presence Detection: Monitors human presence after motion is initially detected. This mode first detects human action, then the radar monitors if the person remains in the range.
Motion Detection Mode Diagram
Illustration of the sensor in Motion Detection mode, detecting movement in a room.
Presence Monitor Mode Diagram
Illustration of the sensor in Presence Monitor mode, detecting a stationary person.
Motion + Presence Monitor Mode Diagram
Illustration of the sensor in Motion Detect + Presence Monitor mode, showing the transition from motion to sustained presence detection.

3.3. Setting Descriptions

  • Detection Distance: Adjustable from 3 to 6 meters. It is recommended to adjust the distance as close to your needs as possible.
  • Sensitivity Adjustment: Offers 10 levels of sensitivity. 'Low' can detect general motion (e.g., waving a hand), while 'High' can detect subtle movements (e.g., breathing). If the detected object is very close, even a low sensitivity setting might still detect micromovements.
  • Hold Time: This is the delay time (30-60 seconds, adjustable) before the detection state switches from "someone present" to "no one present" after a person leaves the detection range.
  • Power LED On/Off: Toggles the power indicator LED.
  • Enable/Disable Alarm: Manages message alarms and notification pushing for presence detection.
Detection Range and Sensitivity Settings
Details on detection range (3-6m for presence, 6m for motion), angles (120°), sensitivity, and adjustable hold time.
Internal Sensor Components
Diagram showing the built-in PIR sensor, 24G Microwave Radar sensor, and luminance sensor.
Horizontal and Vertical Detection Angles
Diagrams illustrating the 120° horizontal and 90° vertical detection angles of the sensor.
Built-in Brightness Sensor
The sensor features a built-in brightness sensor for enhanced linkage control options.

4. Maintenance

To ensure optimal performance and longevity of your Lincukoo Smart Sensor, follow these maintenance guidelines:

  • Cleaning: Gently wipe the sensor's exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the device. Ensure the PIR lens and luminance sensor are free from dust and obstructions.
  • Firmware Updates: Periodically check your smart home app (Tuya Smart Life or Home Assistant) for available firmware updates. Keeping the device's firmware up-to-date ensures access to the latest features and performance improvements.
  • Placement: Avoid placing the sensor in direct sunlight or near heat sources, as this can affect its accuracy. Ensure it is not obstructed by furniture or other objects that could block its detection field.

5. Troubleshooting

5.1. Device Not Pairing

  • Ensure your Zigbee gateway is powered on and properly configured in your smart home app.
  • Verify that the sensor is powered on and its LED is blinking during the pairing process (press and hold the button for 5 seconds to initiate pairing mode).
  • Make sure the sensor is within range of your Zigbee gateway.
  • If using the Wi-Fi version (not TZ), ensure Bluetooth is enabled on your mobile phone for initial setup.

5.2. False Triggers or No Detection

  • False Triggers: Adjust the "Sensitivity Adjustment" to a lower level in the app. Also, check the "Detection Distance" setting and reduce it if necessary. Ensure there are no objects (e.g., fans, curtains moving in a draft) that could cause unintended motion.
  • No Detection: Increase the "Sensitivity Adjustment" to a higher level. Verify the sensor's placement and ensure its detection field is not obstructed. Check the power supply to ensure the device is active.
  • Comparison with other sensors: This sensor is designed to prevent missing and false triggers. If you experience issues, review the settings carefully.
Comparison of sensor trigger performance
Visual comparison highlighting the sensor's ability to trigger immediately on fast-moving human presence versus other sensors that may have delayed or missed triggers.

5.3. Luminance Sensor Issues

  • Ensure the luminance sensor area (as shown in the product overview diagram) is clean and free from dust or obstructions.
  • Check the ambient lighting conditions; extreme darkness or brightness might affect readings.

6. Specifications

FeatureSpecification
VersionTZ
Platform SupportTuya, Home Assistant
Transmission ProtocolZigbee 3.0
Zigbee to MQTT SupportYes
Transmission Distance (Max)40 meters
Detection ModesMotion, Presence, Combination
Detection Range3-6 meters (adjustable)
Sensitivity Adjustment10 levels
Luminance Range0-1000 lux
Power Input5V Type-C
IP GradeIP64
Dimensions60*60*10mm
Installation MethodDouble-sided tape
CertificationCE, RoHS, FCC

7. User Tips

  • This sensor is ideal for rooms where you want lights, air conditioning, or curtains to activate when someone is present for a long time and turn off when the room is empty. Examples include meeting rooms, reading rooms, and living rooms.
  • Leverage the sensor's linkage capabilities through your Zigbee gateway. For instance, you can configure it to turn on lights and keep them on when presence is detected, and then turn them off once no one is detected in the area.
  • Remember that the TZ version specifically requires a Zigbee gateway and is compatible with Tuya and Home Assistant platforms.

8. Warranty and Support

For warranty information, technical support, or further assistance, please contact the seller or manufacturer directly. You may also refer to the comprehensive user manual available in PDF format for more detailed instructions and diagrams:

View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.