1. Introduction
The Tuya Zigbee 3-in-1 Smart Soil Tester, model SGS02Z, is designed to help you monitor the health of your plants by measuring three key environmental factors: soil moisture, air temperature, and sunlight intensity. This device features a digital LCD display for direct readings and integrates with the Tuya Smart Life app for remote monitoring and data recording.
Key Features:
- 3-in-1 Measurement: Monitors soil moisture, air temperature, and light intensity.
- Digital Display: Provides instant readings directly on the device's LCD screen.
- Smart App Integration: Connects with the Tuya Smart Life app for remote monitoring and historical data tracking via Zigbee protocol.
- Temperature Units: Easily switch between Celsius (°C) and Fahrenheit (°F).
- Data Recording: The app can record and display historical data for up to 365 days.
- Low Power Consumption: Designed for long battery life using AAA alkaline batteries.
2. Product Overview and Components
Familiarize yourself with the different parts of your soil tester:
The LCD display provides the following information:
- Connection Status: Indicates if the device is connected to the gateway.
- Battery Status: Shows the current battery level.
- Humidity: Displays soil moisture percentage.
- Temperature: Shows air temperature in °C or °F.
- Sunlight: Indicates light intensity (e.g., Low-, Low, Normal, High, High+).
3. Setup and Installation
3.1 Battery Installation
- Open the battery compartment located on the back of the device.
- Insert 2 AAA alkaline batteries (not included), ensuring correct polarity.
- Close the battery compartment securely.
3.2 Device Pairing (Requires Tuya Zigbee Gateway)
Important: This product requires a TUYA Zigbee gateway for use and cannot be connected directly to the app independently. The gateway is not included.
- Ensure your Tuya Zigbee gateway is powered on and connected to your network.
- On the soil tester, press and hold the button for 5 seconds until the indicator light flashes rapidly. This indicates the device has entered pairing mode.
- Open the Tuya Smart Life app on your smartphone.
- Navigate to your Zigbee gateway interface within the app.
- Click "Add Device" or similar option to initiate the search for new Zigbee devices.
- Once the device is found and added, access its operation panel in the app.
3.3 Placement in Soil
- Insert the device vertically into the soil of your plant pot or garden bed.
- Ensure the probe is fully submerged in the soil, avoiding stones or compacted areas.
- Wait for approximately 1 minute for the readings to stabilize before taking measurements.
4. Operation
4.1 Reading Data
You can read the data in two ways:
- On-Device Display: The LCD screen on the soil tester will show current humidity, temperature, and sunlight levels.
- Tuya Smart Life App: Open the app and access the device's panel to view real-time data and historical trends.
4.2 Temperature Unit Switching
To switch between Celsius (°C) and Fahrenheit (°F) on the device's display, simply click the round button once. The mobile app also allows direct switching of temperature units within its settings.
4.3 Sunlight Intensity Levels
The device measures sunlight intensity and categorizes it into 5 levels:
| Level | Lux Range |
|---|---|
| Low- | 0 - 1000 lux |
| Low | 1000 - 2000 lux |
| Normal | 2000 - 4000 lux |
| High | 4000 - 5000 lux |
| High+ | 6000+ lux |
5. Maintenance
5.1 Battery Replacement
When the low battery indicator flashes on the device's display, the device will no longer update values. Please replace the 2 AAA alkaline batteries in a timely manner to ensure continuous operation and accurate readings.
5.2 Cleaning
Gently wipe the probe with a soft, damp cloth after use to remove any soil residue. Do not use harsh chemicals or abrasive materials. Ensure the device is dry before storing.
6. Troubleshooting (Q&A)
- Q: The measured soil humidity is inaccurate.
- A: Differences in measurement depth and position within the soil may lead to significant variations in the results. It is recommended to take multiple readings for the same potted plant at different spots and then calculate the average value for a more accurate assessment.
- Q: The product cannot be added to the Smart Life APP.
- A: The product operates using the Zigbee protocol and must be paired with a Tuya Zigbee gateway to function. It cannot be directly added to the app interface on its own. Ensure your Zigbee gateway is properly set up and the soil tester is in pairing mode.
7. Important Notes
- This product is not suitable for measuring liquid humidity (e.g., water directly). It is designed for soil.
- Do not use the product in environments with hard objects such as stones or highly compacted soil, as this may damage the probe.
- The product is not waterproof. Please avoid getting the main body wet when watering plants. Only the probe is designed to be inserted into moist soil.
8. User Tips
- For consistent readings, try to insert the probe to a similar depth each time you measure.
- If you have multiple plants, consider labeling the data points in your app to keep track of individual plant needs.
- Regularly check the battery status, especially if you rely on the app for remote monitoring, to avoid interruptions in data collection.
9. Specifications
| Parameter | Value |
|---|---|
| Model | SGS02Z |
| Temperature Range | 0 - 60 °C (32°F - 140°F) |
| Humidity Range | 0 - 100% |
| Light Levels | 5 levels (0-1000 lux LOW-; 1000-2000 lux LOW; 2000-4000 lux NOR; 4000-5000 lux High; 6000+ lux High+) |
| Protocol | Zigbee |
| App Compatibility | Tuya Smart Life |
| Battery Type | 2 x AAA alkaline batteries (not included) |
| Dimensions (Total) | 188.7 mm (Length) |
| Dimensions (Head) | 88.2 mm (Length) x 36.8 mm (Width) x 25.7 mm (Thickness) |
10. Warranty and Support
For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.
A user manual in PDF format may also be available from the seller for additional details.