Introduction
Thank you for choosing the coolo Zigbee Door Window Sensor. This device is designed to enhance your home security by detecting the opening and closing of doors and windows, providing real-time alerts and status monitoring through your smart home system. For optimal performance and to prevent damage, please read this manual carefully before use.
This sensor requires a Zigbee gateway (hub) to function and connect to your smart home network. It is compatible with Tuya Smart and Smart Life applications, and can also work with eWeLink ZigBee Gateway Hubs.
Safety Precautions
- Do not install the product outdoors, on an unstable base, or in areas unprotected from rain or excessive moisture.
- Avoid placing magnetic metals or other objects near the sensor during installation to ensure proper operation.
- Ensure the installation surface for the door sensor is smooth, flat, dry, and clean for secure adhesion.
- This device operates on DC3V (2x AAA batteries). Do not use incorrect battery types or voltages.
- Keep out of reach of children.
Package Contents
Please check the box for the following items:
- Zigbee Door Window Sensor (Main body and Magnet)
- User Manual
- Paper Clip (for reset)
- Double-sided Sticker (for installation)
Specifications
Figure 1: Product Parameter Table
| Parameter | Value |
|---|---|
| Product Name | Door & Window Sensor |
| Wireless Protocol | Zigbee 802.15.4 |
| Sensing Distance | ≤15mm |
| Input Voltage | DC3V LR03 |
| Battery Type | LR03-1.5V/AAA*2 (not included) |
| Quiescent Current | ≤10uA |
| Alarm Current | ≤160mA |
| Low Power Undervoltage | ≤2.7V |
| Working Temperature | -10℃~50℃ |
| Working Humidity | max 95%RH |
Figure 2: Product Dimensions (Main body: 70x25x20mm, Magnet: 43x11x15mm)
Setup Guide
1. Battery Installation
- Open the battery cover of the main sensor unit.
- Insert two AAA 1.5V batteries, ensuring correct positive (+) and negative (-) polarity.
- Close the battery cover securely.
2. Physical Installation
The sensor consists of two parts: the main body and a magnet. These should be installed on a door/window and its frame, respectively, with an alignment mark for guidance.
Figure 3: Door & Window Sensor Installation Diagram
- Clean the desired installation surfaces on the door/window and its frame. Ensure they are smooth, flat, dry, and clean.
- Peel off the protective film from the 3M adhesive tape on the back of both the main sensor body and the magnet.
- Attach the main sensor body to the door/window frame and the magnet to the door/window itself. Ensure the alignment marks on both parts are facing each other and are within 10mm when the door/window is closed.
- Press firmly for a few seconds to ensure good adhesion.
Important: The distance between the main sensor and the magnet must be less than 10mm when the door/window is closed to ensure proper detection. Avoid strong magnetic fields during installation.
3. Network Configuration (Pairing with Zigbee Gateway)
This Zigbee sensor requires a Zigbee gateway (hub) to connect to your smart home network and the mobile application.
Figure 4: Network Connection Overview
- Ensure your Zigbee gateway is powered on and successfully connected to your Wi-Fi network and the Tuya Smart or Smart Life app.
- Quick Connection Mode: Press and hold the RESET button on the sensor for 5 seconds using the provided paper clip. The LED indicator will flash slowly. Follow the prompts in your gateway's app to add the device.
- Compatibility Mode (if Quick Connection fails): If the sensor does not connect in quick connection mode, press and hold the RESET button for 10 seconds. The indicator light will flash quickly. Follow the prompts in your gateway's app to add the device.
Note: The Zigbee version product must be connected to a Zigbee gateway to function properly and upload data to the server/APP.
Operating Instructions
APP Remote Monitoring
Once successfully paired with your Zigbee gateway and connected to the Tuya Smart or Smart Life app, you can remotely monitor the status of your doors and windows from anywhere.
Figure 5: Remote Monitoring via Mobile App
The app will display whether the door/window is open or closed in real-time.
Automatic Alarm and Notifications
Configure automation rules within the Tuya Smart or Smart Life app to receive instant push notifications on your mobile device when the sensor detects an open/close event. This allows you to be alerted to potential intruders or simply monitor activity when you are away from home.
Figure 6: Automatic Alarm Notification Example
You can also integrate the sensor with other smart home devices (e.g., smart speakers like Amazon Alexa or Google Home) to trigger automated responses or voice announcements when the sensor is activated.
History Record
The app maintains a history log of all open/close events detected by the sensor. You can review these records at any time to track activity patterns.
Figure 7: Event History Record in the App
Multiple Application Scenarios
The versatile design allows the sensor to be used in various locations beyond just doors and windows, such as cabinets, drawers, or refrigerators, depending on your security and monitoring needs.
Figure 8: Examples of Sensor Placement (Door, Window, Cabinet, Refrigerator)
Maintenance
- Battery Replacement: The sensor uses two AAA 1.5V batteries. When the battery level is low (≤2.7V), the app will typically notify you. Replace both batteries promptly to ensure continuous operation.
- Cleaning: Wipe the sensor with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Firmware Updates: Periodically check the Tuya Smart or Smart Life app for any available firmware updates for your Zigbee gateway and connected devices. Keeping firmware updated can improve performance and security.
Troubleshooting
- Sensor not connecting to gateway:
- Ensure your Zigbee gateway is powered on, connected to Wi-Fi, and within range. Try both 'Quick Connection Mode' and 'Compatibility Mode' by pressing the reset button for 5 or 10 seconds respectively. Verify that the Zigbee hub is compatible with Tuya/Smart Life. Some users have reported issues with specific hubs like Sonoff ZHA Home Assistant.
- Sensor not detecting open/close events:
- Check the alignment of the main sensor and the magnet. The gap between them must be less than 10mm when closed. If the gap is too large, the sensor will not trigger. Reposition the magnet or use a spacer if necessary. Ensure no magnetic metals are interfering with the sensor's operation.
- Delayed notifications or slow response:
- Ensure your Zigbee network has good signal strength and is not congested. A weak Zigbee signal can lead to delays. Check your Wi-Fi connection for the gateway. Some users have experienced delays, which might be related to network setup or specific gateway models.
- One sensor not working out of multiple units:
- First, check the batteries in the non-working unit. If new batteries don't resolve the issue, attempt to re-pair the sensor with the gateway. If it still fails, the unit may be faulty.
- No siren or audible alarm:
- This door/window sensor does not have a built-in siren. Alarms are typically push notifications to your phone. To have an audible alarm, you would need to integrate it with a compatible smart siren or alarm system through your smart home app's automation settings.
User Tips
- Battery Life: While some users hope for 2 years of battery life, actual duration can vary based on usage and network activity. Regularly check battery status in the app.
- Home Assistant Integration: Many users have successfully integrated these sensors with Home Assistant via Zigbee USB dongles (e.g., ZHA or MQTT), reporting easy pairing and reliable performance.
- Magnet Placement: For windows or doors that are not perfectly flush, the small internal magnets might require precise positioning. Consider using a small shim or Blu Tack to adjust the magnet's angle or proximity to the main sensor if you experience inconsistent detection.
- Alert Configuration: The sensor primarily sends notifications. To receive audible alerts or trigger other actions, set up specific scenes or automations within your Tuya Smart or Smart Life app.
- Build Quality: While functional, some users note the build quality feels less premium. Handle with care during installation.
Frequently Asked Questions
- Q: Does this sensor have a siren?
- A: No, this sensor does not have a built-in siren. It sends notifications to your smartphone via the app. You can integrate it with a separate smart siren through your smart home system's automation settings.
- Q: Does it work with a Zigbee hub or only with Tuya?
- A: This device requires a Zigbee hub (gateway) to function. It is compatible with Tuya-branded Zigbee hubs and can be managed through the Tuya Smart or Smart Life app. It is also compatible with eWeLink ZigBee Gateway Hubs.
- Q: Is it compatible with Amazon Alexa or Google Home?
- A: Yes, once connected to a compatible Zigbee gateway and configured in the Tuya Smart or Smart Life app, it can be integrated with Amazon Alexa or Google Home for voice control and smart home routines.
- Q: Does it work directly with Home Assistant?
- A: Yes, many users have successfully integrated this sensor with Home Assistant using a Zigbee USB dongle and ZHA (Zigbee Home Automation) or MQTT. However, compatibility can sometimes vary with specific Home Assistant setups or Zigbee coordinators.
- Q: Is it compatible with Imou or Mi Home control panel?
- A: Compatibility with specific third-party systems like Imou or Mi Home is not guaranteed unless they explicitly support Tuya/Smart Life Zigbee devices or have an open Zigbee integration that can recognize this sensor. Please check the specifications of your existing system.
Warranty and Support
For any issues or questions regarding your coolo Zigbee Door Window Sensor, please refer to the official product page or contact the seller directly for support. Keep your purchase receipt for warranty claims.
A PDF version of the user manual may be available for download from the product's online listing for detailed instructions and diagrams.