TOMZN TO219G

Contents

TOMZN TO219G Series Manual Transfer Switch User Manual

Models: TO119G, TO219G, TO319G, TO419G

1. Safety Information

Warning:

To avoid danger of suffocation, keep this bag away from babies and children. Do not use this bag in cribs, beds, carriages, or play pens. This bag is not a toy.

This device is designed for power conversion in electrical circuits. Installation and operation should only be performed by a qualified electrical professional.

Applicable Regulations and Harmonized Standards:

  • Low Voltage Directive (LVD) 2014/35/EU
  • EN IEC 60947-1:2021
  • EN IEC 60947-3:2021

2. Product Overview

The TOMZN TO119G/TO219G/TO319G/TO419G series changeover switches are versatile manual isolation switches integrating four core functions: On, Off, Transfer, and Isolation. They enable safe switching or isolation between two loads on a single line or between two independent power sources (e.g., utility and generator). Constructed with a high-flame-retardant PA66 housing for durability, these switches are designed for easy DIN rail (35×7.5mm) mounting. Rated at 125A and 400V AC, they provide a reliable and safe solution for power switching and isolation in industrial equipment and circuits. The switches feature three positions: I (Source 1 connected), Off (both groups disconnected), and II (Source 2 connected), with complete electrical interlocking to prevent simultaneous connection of both sources.

TOMZN 125A High-Current Dual Power Changeover Switch
TOMZN 125A High-Current Dual Power Changeover Switch.

Key Features:

  • High-Current Capability
  • Quick Switch Mechanism
  • Interlocking Conversion (Two in One)
  • Low Energy Consumption
  • Breakable Circuit Design
  • Flame Retardant Material (PA66 Housing)
Diagram illustrating key features of the TOMZN changeover switch
Visual representation of the switch's core features.

3. Specifications

Attribute Value
ModelTO119G / TO219G / TO319G / TO419G
Number of Poles1P / 2P / 3P / 4P
Rated Voltage400V AC (220/380V), 50/60Hz
Rated Current125A
Rated Insulation Voltage (Ui)690V
Rated Impulse Withstand Voltage (Uimp)4kV
Housing MaterialHigh-flame-retardant PA66
Installation Method35mm DIN rail (by means of fast clip device)
Contact Form1-0-2
Electrical Life1500 cycles
Mechanical Life8500 cycles
Protection DegreeIP20
Ambient Temperature-5°C ~ 40°C
Terminal/Cable Size16mm²
CertificationCE
Is Smart DeviceNo
Includes Wireless FunctionalityNo
Includes BatteryNo
Overvoltage Protection table with detailed specifications
Detailed specifications for the TOMZN changeover switch series.

Dimensions:

The switches are available in various pole configurations, each with specific dimensions.

Dimension diagram for 1P changeover switch
Dimension Diagram for 1P (Single Pole) Switch: 36mm (1.42in) width, 83mm (3.27in) height, 78mm (3.07in) depth, 50mm (1.97in) base width.
Dimension diagram for 4P changeover switch
Dimension Diagram for 4P (Four Pole) Switch: 144mm (5.67in) width, 85mm (3.35in) height, 108mm (4.25in) depth.

4. Installation

The TOMZN changeover switches are designed for easy installation on a 35mm DIN rail.

  1. Ensure the power supply is completely disconnected before beginning installation.
  2. Mount the switch securely onto a standard 35mm DIN rail. The fast clip device allows for simple installation and disassembly.
  3. Connect the equipment in accordance with the wiring diagram specifications provided in this manual.
  4. For dual power switching applications, ensure that the lower terminals are used for incoming power and the upper terminals for outgoing power (lower in and upper out).
Image showing the switch mounted on a DIN rail
The switch is designed for 35mm standard rail installation.

Wiring Diagrams:

Proper wiring is crucial for safe and correct operation. Refer to the diagrams below for typical connections.

Wiring diagram for 2P and 4P changeover switches
Wiring connections for 2P and 4P switches, showing 'Normal' and 'Ready' power inputs and 'Load' outputs.
Simplified wiring diagram for 1P and 4P changeover switches
Simplified wiring for 1P and 4P switches, indicating 'Normal' and 'Ready' inputs to 'Load'.

5. Operation

The switch features a robust operating handle for manual control. It has three distinct positions:

  • I Position: Connects to Source 1 (e.g., normal power supply).
  • Middle Position: All connections are disconnected, providing complete isolation.
  • II Position: Connects to Source 2 (e.g., standby power supply).

The switch incorporates electrical interlocking to prevent simultaneous connection of both power sources, ensuring safe operation.

Product appearance of a 1P changeover switch
Front view of a 1P switch, showing the operating handle.
Product appearance of a 2P changeover switch with labeled terminals
Front view of a 2P switch, highlighting power terminals and operating handle.

Switch Positions Explained:

Diagram showing 1P switch positions: I, Middle, II
1P Switch Positions: I (1 and 2 connect), Middle (All disconnect), II (1 and 4 connect).
Diagram showing 2P switch positions: I, Middle, II
2P Switch Positions: I (1 and 2 connect, 5 and 6 connect), Middle (All disconnect), II (1 and 4 connect, 5 and 8 connect).
Diagram showing 4P switch positions: I, Middle, II
4P Switch Positions: I (1 and 2 connect, 5 and 6 connect, 9 and 10 connect, 13 and 14 connect), Middle (All disconnect), II (1 and 4 connect, 5 and 8 connect, 9 and 12 connect, 13 and 16 connect).

6. Maintenance

To ensure the longevity and safe operation of your TOMZN changeover switch, please observe the following precautions:

  • Do not place the device near flammable materials.
  • Ensure adequate ventilation during operation to prevent overheating.
  • Disconnect from power and store properly when not in use for extended periods.
  • Regularly inspect the switch for any signs of wear, damage, or loose connections.
  • Keep the switch clean and free from dust and debris.
Image showing the thermoset housing of the switch resistant to high temperatures
The thermoset housing provides resistance to high temperatures.

7. Troubleshooting

If you encounter issues with your TOMZN changeover switch, consider the following general troubleshooting steps:

  • No Power Output: Check both input power sources (Normal and Ready) to ensure they are active. Verify all wiring connections are secure and correct according to the diagrams. Ensure the switch is fully engaged in either 'I' or 'II' position.
  • Switch Malfunction: If the handle feels stiff or does not move freely between positions, do not force it. Disconnect power and inspect for any obstructions or internal damage.
  • Overheating: Ensure the switch is installed in a well-ventilated area and not overloaded beyond its rated current.

For persistent issues, consult a qualified electrician or contact customer support.

8. User Tips

  • Users have noted the product is sturdy and well-packaged upon arrival.
  • It serves as an excellent replacement for existing cutters in similar applications.
  • Always double-check the wiring against the provided diagrams before applying power.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation included with your purchase or contact TOMZN customer service directly.

© 2024 TOMZN. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.