Yeelight YLYYD-0024

Contents

Yeelight LED Inductive Night Light Motion Sensor Light User Manual

Model: YLYYD-0024

Yeelight Motion Sensor Night Light

Front view of the Yeelight Motion Sensor Night Light.

Product Features

The Yeelight LED Inductive Night Light is a versatile and energy-efficient lighting solution designed for various home environments. It features a warm white light, dual sensors for light and motion detection, and multiple installation options.

  • 2700K Warm White Light: Provides a soft, ambient glow.
  • Dual Sensors: Built-in light and PIR motion sensors for automatic operation.
  • Rechargeable: Equipped with a 750mAh battery, rechargeable via Type-C port.
  • Versatile Installation: Features a built-in magnet, a hook, and a wall sticker for flexible placement.
Yeelight Night Light with highlighted features

Diagram illustrating the night light's components: On/Off Power switch, Light, Motion sensor, USB charging port, USB cable, Magnetic disc/adhesive, and Hook.

Setup and Installation

The Yeelight Night Light offers three convenient installation methods:

1. Magnetic/Adhesive Installation

  1. Peel off the protective film from the back of the magnetic disc.
  2. Stick the magnetic disc firmly to your desired location (e.g., wall, cabinet, refrigerator).
  3. Attach the Night Light to the magnetic disc.
Close-up of the night light's back with magnetic disc and hook

The back of the night light showing the magnetic disc and hook.

Night light attached to a wall with adhesive

Example of the night light attached to a wall using the adhesive disc.

2. Hanging Installation

  1. Flip up the integrated hook on the back of the Night Light.
  2. Hang the Night Light on any suitable place, such as a wardrobe rail or a towel rack.
Night light hanging by its hook

The night light hanging by its integrated hook.

3. Portable Use

The compact design allows the night light to be easily carried and placed wherever needed, such as inside drawers or held by hand.

Night light used to illuminate a drawer

Using the night light to illuminate the contents of a drawer.

Child holding the night light, demonstrating its portability and warm glow

A child holding the portable night light.

Operating Instructions

The night light features a three-position switch for different operating modes:

Close-up of the OFF/AUTO/ON switch

The three-gear switch for OFF, AUTO, and ON modes.

  • ON Mode: The light will stay on continuously. Use this mode when you need constant illumination, such as searching for items in a drawer.
  • AUTO Mode (Motion Detection): In a dark environment, the light will automatically turn on when it detects motion. It will turn off automatically after 15 seconds of no motion.
  • OFF Mode: Powers off the night light.

Motion Sensing Range

The motion sensor can detect movement up to 5-7 meters (16-23 feet) directly in front and 2-3 meters on the sides, with a 120-degree sensing angle. The sensitivity may vary based on environmental temperature, human body type, and movement speed.

Diagram showing the motion sensing range

Illustration of the night light's 120-degree motion sensing range.

Charging the Night Light

The night light is rechargeable via a Micro-USB port. A red indicator light will illuminate during charging and turn off when fully charged. It is recommended to charge the device before its first use.

Close-up of the Micro-USB charging port

Detail of the Micro-USB charging port.

Product demonstration video showing motion sensing, constant on mode, and charging process.

Maintenance

  • Do not cover the motion sensor.
  • Use a clean and soft cloth to clean the sensor and the light.
  • Do not use any cleaning products that contain corrosive solvents.
  • Avoid placing the night light close to any heat sources, such as heaters.
  • Avoid placing the night light close to anything that can change humidity, such as a humidifier.
  • Avoid direct sunlight and humid environments.
  • Charge the Night Light whenever the indicator light shows it is needed.

Troubleshooting

Problem Possible Cause Solution
Light does not turn on in AUTO mode. Insufficient ambient darkness; battery low; sensor covered or obstructed. Ensure the environment is dark enough for the light sensor to activate. Charge the device. Check if the motion sensor is clear of obstructions.
Light does not stay on in ON mode. Battery low. Charge the device.
Light turns off too quickly or not at all. Continuous motion detected; sensor malfunction. Ensure no continuous motion is within the sensor's range. If the issue persists, contact support.
Red indicator light does not turn off after charging. Charging cable or power source issue; internal battery issue. Try a different USB cable and power adapter. If the problem persists, the device may be fully charged, or there might be an internal issue.

Specifications

Attribute Value
Model YLYYD-0024
Brand Name Yeelight
Color Temperature 2700K
Sensor Type Light Sensor + PIR Motion Sensor
Brightness (Sensor Mode) 3.5lm
Brightness (Lighting Mode) 7lm
Battery Capacity 750mAh
Max Power 0.2W
Input Voltage 5V
Net Weight 73g
Dimensions 73 x 73 x 34mm
Lifetime 25000h
Relative Humidity 0%-85%RH
Wireless Communication Non-Remote Function
Power Source AC
Battery Included Yes
Origin Mainland China

User Tips

  • Verify Sensor Functionality: Upon receiving the product, test both the light sensor and motion sensor modes to ensure they function as expected.
  • Optimal Placement: For best motion detection, place the light where movement is most likely to occur within its sensing range (e.g., low on a wall near a pathway, inside a closet).
  • Charging Indicator: The red indicator light signifies charging. It should turn off when the device is fully charged.

Warranty and Support

This product is covered by a warranty provided by the manufacturer. For detailed warranty information or technical support, please refer to the official Yeelight website or contact their customer service.

A digital version of the user manual is available for download: User Manual (PDF)

Safety Warnings

  • The light source contained in this luminaire shall only be replaced by the manufacturer or their service agent or a similar qualified person.
  • This is a Class III Luminaire.
  • If the light does not turn on, please use a 5V adapter to charge it.
  • For indoor use only.
  • Do not disassemble the product. The light-emitting diode may cause damage to your eyes.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.