1. Introduction
The SLyric 10D Laser Body Slimming Machine is designed for painless fat removal, fat burning, cellulite reduction, and body contouring. Utilizing advanced green light laser technology (532nm and 635nm), this device aims to dissolve fat, reduce cellulite, rebuild collagen, and improve metabolism, contributing to overall body slimming and skin tightening.
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your SLyric 10D Laser Body Slimming Machine. Please read it thoroughly before initial use and keep it for future reference.
2. Safety Information
- Always wear the provided protective eyewear during operation to prevent eye exposure to laser light.
- Do not look directly into the laser beams.
- Keep the device out of reach of children and pets.
- Ensure the device is placed on a stable, level surface during use.
- Do not operate the device near water or in damp environments.
- Unplug the device from the power outlet when not in use or before cleaning.
- Do not attempt to open or repair the device yourself. Refer all servicing to qualified personnel.
- Consult a healthcare professional before using this device if you have any medical conditions, are pregnant, or have implanted electronic devices.
- This device is not intended for medical supervision.
3. Product Overview
3.1 Components
- Main Unit (with Host Touch Screen)
- Laser Treatment Heads (10 pieces)
- Adjustable Arms for Laser Heads
- Laser Touch Screen (7-inch)
- Power Supply Unit
- Protective Eyewear (not explicitly listed but shown in video and crucial for laser safety)
3.2 Principle of Action
The device utilizes green light laser irradiation to target fat cells. This process causes fat droplets to leak out from the fat cells. Subsequently, these fat cells are disintegrated, and the released fat is naturally excreted through the body's lymphatic system.
4. Specifications
| Feature | Specification |
|---|---|
| Brand Name | SLyric |
| Model Number | 10D Rotating Green Laser Lights (LM-01-808 to LM-020-808) |
| Host Touch Screen | 10.4 inch |
| Laser Touch Screen | 7 inch |
| Wave Length | 532nm ±10nm |
| Energy | 1-3 gears (adjustable) |
| Rotating Speed | 1-3 gears (adjustable) |
| Laser Single Head Power | 500mW |
| Treatment Area | About 30mm*800mm |
| Number of Treatment Heads | 10 pieces |
| Fuse | 10A |
| Power | 150W |
| Voltage | AC110V~220V±10%, 50-60Hz |
| Material | Metal |
| Power Source | Electric (Mains Powered) |
| High-concerned chemical | None |
| Hand Instrument | No |
| Is Batteries Included | No |
| Packing Weight (Device) | 60KG |
| Package Size (Shipping) | 111*77*61CM |
5. Setup
- **Unpacking**: Carefully remove all components from the packaging. Inspect for any damage.
- **Assembly**: Assemble the main unit and attach the adjustable arms with the laser treatment heads. Ensure all connections are secure. Refer to the product images for visual guidance on assembly.
Figure 5: Various views of the assembled SLyric 10D Laser Body Slimming Machine. - **Placement**: Position the device on a stable, flat surface in a well-ventilated area, away from direct sunlight and moisture.
- **Power Connection**: Connect the power supply unit to the device and then plug it into a suitable AC110V~220V±10%, 50-60Hz power outlet.
- **Initial Check**: Before first use, ensure all cables are properly connected and there are no loose parts.
6. Operating Instructions
- **Power On**: Press the power button on the main unit to turn on the device. The host touch screen (10.4 inch) and laser touch screen (7 inch) will illuminate.
- **Select Settings**: Use the touch screens to select your desired treatment parameters, including energy level (1-3 gears) and rotating speed (1-3 gears).
- **Positioning**: Adjust the arms and laser heads to position them over the target treatment area. The laser wings are adjustable up to 100 degrees.
- **Protective Eyewear**: Ensure both the operator and the person receiving treatment are wearing appropriate protective eyewear before activating the laser.
- **Start Treatment**: Initiate the laser treatment via the touch screen interface. The green laser lights will activate, projecting onto the skin.
Video 1: Demonstration of the SLyric 10D Laser Body Slimming Machine in operation, showing laser patterns on the abdomen. - **Monitor Progress**: Observe the treatment area and adjust settings as needed.
- **End Treatment**: Once the session is complete, stop the laser via the touch screen and power off the device.
- **Unplug**: Disconnect the device from the power outlet after use.
6.1 Treatment Areas and Benefits
The device is suitable for various body parts, offering benefits such as:
- 360° body fat reduction
- Quick hip lift
- Slimming of waist, legs, and arms
- Overall body contouring and skin tightening
- Pore removal and face lift (as per general features, specific application details may vary)
7. Maintenance
- **Cleaning**: Regularly wipe the device's exterior, touch screens, and laser heads with a soft, dry cloth. For stubborn marks, use a slightly damp cloth and then dry thoroughly. Do not use abrasive cleaners or solvents.
- **Storage**: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure it is unplugged and covered to protect it from dust.
- **Cable Care**: Periodically check power cables for any signs of wear or damage. Replace immediately if any damage is found.
8. Troubleshooting
- **Device Not Powering On**:
- Check if the power cable is securely plugged into both the device and the wall outlet.
- Ensure the power outlet is functional by testing it with another appliance.
- Verify the device's fuse (10A) is intact. If blown, replace it with a fuse of the same rating.
- **Lasers Not Activating**:
- Ensure the device is powered on and all settings are correctly selected on the touch screen.
- Check if any safety interlocks or emergency stop buttons are engaged.
- If the issue persists, contact customer support.
- **Touch Screen Unresponsive**:
- Restart the device by powering it off and on again.
- Ensure the screen is clean and free from debris or moisture.
9. User Tips
No specific user tips were available from provided reviews or Q&A content. However, general best practices for similar devices include:
- **Consistency**: Regular and consistent use as per recommended protocols often yields better results.
- **Hydration**: Maintain good hydration by drinking plenty of water, which can support the body's lymphatic system in expelling fat.
- **Healthy Lifestyle**: Combine device use with a balanced diet and regular exercise for optimal and sustainable results.
- **Skin Preparation**: Ensure the skin is clean and dry before treatment.
10. Warranty and Support
- **Warranty**: The SLyric 10D Laser Body Slimming Machine comes with a 1-Year Warranty.
- **After-sales Service**: Free spare parts, video technical support, and online support are provided.
- **Customer Service**: 24 hours online service is available for inquiries and assistance. Instructions and operation video training are also provided.
11. Compliance
This product has been tested and found to comply with the limits of RoHS 2.0 Directive (EU) 2015/863 and (EU)2017/2102, amending Annex II to Directive 2011/65/EU. The test results indicate a 'Pass' for the content of Lead, Cadmium, Mercury, Hexavalent Chromium, PBBs, PBDEs, Di-(2-ethylhexyl) phthalate (DEHP), Benzylbutyl phthalate (BBP), Dibutyl phthalate (DBP), and Diisobutyl phthalate (DIBP).
For detailed test reports, please refer to the official documentation provided by the manufacturer.