1. Safety Instructions
WARNING: High Voltage Inside. Do not open it by yourself!
- This device is not a toy. Keep it out of reach of children and pets.
- Do not install or operate the driver in environments with high humidity, dust, or flammable gases.
- Ensure the input voltage matches the rated range (AC 100V-240V) before connecting to the power grid.
- Do not disassemble, puncture, or modify the driver; this will void the warranty and pose safety hazards.
- The driver must be installed by a qualified electrician in compliance with local electrical regulations (e.g., IEC/EN 60598, IEC/EN 61347).
- Avoid exposing the driver to direct sunlight or temperatures outside the range of -30°C to +65°C.

2. Product Overview
This series of slim LED power supply drivers provides stable DC output for LED lighting systems, with models ranging from 24W to 90W, available in DC 12V and DC 24V versions.
Key Features:
- Universal Input: AC 100-240V, works worldwide.
- Dual Output: DC 12V/24V optional, compatible with various LED lights.
- Aluminum Shell: Ensures excellent heat dissipation and a long lifespan.
- Slim Design: Easy to integrate and hide in light slots or cabinets.
- Stable Output: Features no flicker, anti-interference, and premium components for consistent performance.
- IP20 & Safety: Designed for indoor use only, with built-in overload and short-circuit protection.
- Wide Application: Suitable for LED strips, ambient lights, staircase lighting, closet lighting, and more.

3. Specifications
| Output Voltage | Power (W) | Output Current (MAX) | Input Voltage | Dimensions (mm) | Operating Temp. Range |
|---|---|---|---|---|---|
| DC 12V | 24 | 2A | AC 100V-240V | 153×19×21 | -30°C ~ +65°C |
| DC 12V | 36 | 3A | AC 100V-240V | 240×19×21 | -30°C ~ +65°C |
| DC 12V | 48 | 4A | AC 100V-240V | 282×19×21 | -30°C ~ +65°C |
| DC 12V | 60 | 5A | AC 100V-240V | 310×19×21 | -30°C ~ +65°C |
| DC 12V | 72 | 6A | AC 100V-240V | 377×19×21 | -30°C ~ +65°C |
| DC 12V | 90 | 7.5A | AC 100V-240V | 410×19×21 | -30°C ~ +65°C |
| DC 24V | 24 | 1A | AC 100V-240V | 153×19×21 | -30°C ~ +65°C |
| DC 24V | 36 | 1.5A | AC 100V-240V | 240×19×21 | -30°C ~ +65°C |
| DC 24V | 48 | 2A | AC 100V-240V | 282×19×21 | -30°C ~ +65°C |
| DC 24V | 60 | 2.5A | AC 100V-240V | 310×19×21 | -30°C ~ +65°C |
| DC 24V | 72 | 3A | AC 100V-240V | 377×19×21 | -30°C ~ +65°C |
General Specifications:
- Shell Material: Aluminum Alloy
- Protection Grade: IP20 (Indoor Use Only)
- Features: Slim, IP20, High Heat Dissipation, Overload Protection, Wide Voltage
- Warranty: 1 Year
- High-concerned chemical: None


4. Installation Instructions
4.1 Wiring Connection
- Input side (AC side): Connect the brown wire to L (Live), blue wire to N (Neutral).
- Output side (DC side): Connect the red wire to DC+ (Positive), black wire to DC- (Negative).
- Ensure all connections are securely insulated and free of short circuits.
Attention: The positive and negative poles cannot be reversed.

4.2 Mounting
- The driver can be mounted in a suitable enclosure or directly to a heat-dissipating surface.
- Maintain a minimum clearance of 20mm around the driver for ventilation.
- Do not cover the driver with insulating materials that may trap heat.
5. Operating Instructions
Once properly installed and wired according to the instructions above, the LED power supply will provide a stable DC voltage to your connected LED lighting system. Ensure that the total power consumption of your LED lights does not exceed the rated power of the power supply to prevent overload and ensure optimal performance and longevity.

6. Maintenance
6.1 General Maintenance
- Disconnect the power supply before cleaning or inspecting the driver.
- Use a dry cloth to remove dust; do not use liquid cleaners.
- Regularly check for loose connections or signs of overheating (discoloration, unusual smells).
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| LED lights do not turn on | Incorrect wiring / No input power | Check input voltage and wiring polarity |
| Flickering lights | Overload / Loose output connection | Reduce load to rated power / Secure output wires |
| Driver overheats | Poor ventilation / Overload | Improve ventilation / Ensure load does not exceed rated current |
User Tips:
- Power Selection: Always choose a power supply with a rated power at least 20% higher than the total power consumption of your LED lights to prevent overload and ensure stable operation. For example, for 100W LED strips, use a 120W power supply.
- RGB LED Strips: This LED driver supports RGB LED strips, but you will need to use a compatible RGB controller separately.
- Indoor Use Only: The IP20 rating means this power supply is not waterproof. Do not use it outdoors or in humid environments.
8. Compliance & Certifications
This product complies with EU directives:
- Low Voltage Directive (LVD) 2014/35/EU
- Electromagnetic Compatibility (EMC) Directive 2014/30/EU
- RoHS Directive 2011/65/EU (Restriction of Hazardous Substances)
Conforms to harmonized standards:
- EN 61347-2-13: LED controlgear - Particular requirements for LED drivers
- EN 55015: EMC requirements for lighting equipment
- EN 60598-1: General requirements for luminaires
9. Warranty & Support
- The product is covered by a 2-year warranty from the date of purchase.
- The warranty is void if the product is damaged due to misuse, disassembly, or non-compliant installation.
- For warranty claims, please contact the distributor with the original purchase receipt.
10. Disposal Information
- This product must not be disposed of as household waste.
- Dispose of it at a designated collection point for electrical and electronic equipment (WEEE) in accordance with local regulations (EU Directive 2012/19/EU).
