1. Introduction
This M.2 NGFF to PCIe 4.0 X4 expansion card is designed to provide an interface expansion solution for motherboards with insufficient or fully occupied PCIe slots, as well as mini PCs and industrial equipment that primarily feature M.2 interfaces. It allows for the connection of PCIe devices where traditional slots are unavailable.
The adapter supports the high-speed PCIe 4.0 X4 standard, offering a theoretical transmission bandwidth of up to 64Gbps, which is ideal for high-performance devices like fast storage drives or professional network cards. It is also backward compatible with PCIe 3.0/2.0 versions, ensuring broad compatibility with various systems. The card features a durable black PCB with an immersion gold finish and clear white silkscreen, measuring a compact 80mm × 22mm × 0.8mm. For stable operation, it includes a SATA 15Pin Power interface to supply consistent power to the card and connected devices.
2. Safety & Warnings
Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
3. Setup and Installation
Package Contents
Before installation, ensure all components are present:
- M.2 NGFF to PCIe 4.0 X4 Adapter Card
- SATA 15Pin Power Cable
- Screwdriver
- Mounting Screw
Component Identification
Familiarize yourself with the key parts of the adapter:
Installation Steps
- Power Off System: Ensure your computer is completely powered off and disconnected from the power source.
- Locate M.2 Slot: Identify an available M.2 NGFF slot on your motherboard.
- Insert Adapter: Carefully insert the M.2 NGFF end of the adapter card into the M.2 slot on your motherboard. Secure it with the provided screw.
- Connect Power: Connect the SATA 15Pin Power cable to the adapter's SATA 15Pin Power port and to an available SATA power connector from your power supply unit (PSU). Alternatively, if using the 4-pin floppy disk drive power port, connect the appropriate cable from your PSU.
Figure 3: Close-up view of the PCIe-E X4 slot and the horizontal 4-pin power supply interface on the adapter. - Install PCIe Device: Insert your desired PCIe device (e.g., graphics card, network card) into the PCIe 4.0 X4 slot on the adapter card.
- Secure Device: Secure the PCIe device in place, typically with a latch or screw on your computer case.
- Power On System: Reconnect power to your computer and power it on.
Driver Installation
After connection, the operating system should automatically identify and install the necessary drivers for the adapter. If drivers are not installed automatically, please visit the official website (refer to the Warranty/Support section for contact information) to download the corresponding drivers for your specific PCIe device.
4. Operating Instructions
Once installed and drivers are recognized, the PCIe device connected to the adapter will function as if it were directly installed in a motherboard PCIe slot. The adapter facilitates lossless data transmission thanks to its multi-layer circuit board design.
An equipment indicator light is present on the adapter to show its operational status. Ensure this light is illuminated after installation to confirm power and basic functionality.
The adapter offers multi-system compatibility, supporting various operating systems including Mac OS, Windows, and Linux, making it versatile for different computing environments.
5. Maintenance
- Keep Clean: Regularly clean your computer's interior to prevent dust buildup on the adapter and connected components, which can affect performance and lifespan. Use compressed air for cleaning.
- Handle with Care: When handling the adapter, avoid touching the gold contacts directly to prevent static discharge or contamination.
- Environmental Conditions: Ensure the computer operates in a well-ventilated area to prevent overheating, which can impact the stability of the adapter and other components.
6. Troubleshooting
- Device Not Detected:
- Ensure the adapter is fully seated in the M.2 slot.
- Verify the PCIe device is correctly inserted into the adapter's PCIe slot.
- Check if the SATA 15Pin power cable is securely connected to both the adapter and the PSU. Insufficient power can prevent detection.
- Confirm that your motherboard's BIOS/UEFI settings are configured to recognize M.2 devices and PCIe expansion.
- Performance Issues (Freezes, Crashes):
- Ensure adequate power supply via the SATA 15Pin connector. Lack of stable power is a common cause of instability.
- Check for overheating. Ensure proper airflow within your computer case.
- Update drivers for the connected PCIe device.
- Driver Installation Failure:
- If the system does not automatically install drivers, manually download the latest drivers for your specific PCIe device from the manufacturer's official website.
- Ensure your operating system is up to date.
7. Specifications
| Feature | Detail |
|---|---|
| Model | PH47 VER.1.5 25F30 |
| Core Function | Converts M.2 NGFF interface to PCIe 4.0 X4 interface |
| Transmission Standard | PCIe 4.0 X4 (backward compatible with PCIe 3.0/2.0) |
| Theoretical Bandwidth | Up to 64Gbps |
| Dimensions (L x W x T) | 80mm × 22mm × 0.8mm |
| PCB Craftsmanship | Black PCB board, white silkscreen, immersion gold process |
| Power Supply | SATA 15Pin Power interface (or Floppy disk drive 4PIN POWER PORT) |
| Installation Type | Internal Add On Card |
| Application Scenarios | Desktop computer upgrades, small form factor (SFF) PC expansions, industrial control equipment interface extensions |
8. User Tips
No specific user tips were available from the provided customer reviews or Q&A data.
9. Warranty and Support
Manufacturer & EU Representative Information
For support and inquiries, please contact:
- Company Name: Valhalla Taxi
- Address: RUE GENERAL DE REFFYE EGD, 88000 EPINAL, France
- Tel: +33(0)629986194
- Mailbox: valhallatax@outlook.com
A detailed user manual in PDF format is available for download: View User Manual (PDF)