ludengchaoshi XFXHE

Contents

LED Modern Three Headed Butterfly Pendant Light

Model: XFXHE | Brand: ludengchaoshi

1. Introduction

Thank you for purchasing the LED Modern Three Headed Butterfly Pendant Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read it thoroughly before installation and keep it for future reference.

This elegant pendant light features a modern butterfly design with three adjustable light colors to suit various moods and settings.

Three butterfly pendant lights illuminating a modern dining room.

Figure 1: LED Modern Three Headed Butterfly Pendant Light in a dining room setting.

2. Safety Instructions

  • Always cut off the power supply at the main circuit breaker before installation, cleaning, or changing any components.
  • Installation should be performed by a qualified electrician to ensure safety and compliance with local electrical codes.
  • Do not install the fixture on unstable ceilings. Ensure the mounting surface is secure and can support the weight of the light.
  • The installation environment should be well-ventilated and dry.
  • Wear gloves during installation to prevent scratches to the lamp's surface and wires.
  • Keep the lamp away from acidic, alkaline, or other corrosive chemicals and gases.
  • This product is designed for indoor use only.
  • Operating voltage: AC 90-260V, 50Hz.

3. Package Contents

Before installation, please check that all parts are present and undamaged:

  • Metal Ceiling Base (1x)
  • Butterfly Lamp Units (3x)
  • Adjustable Power Cords (3x, pre-attached to butterflies)
  • Mounting Hardware (screws, anchors, wire connectors)
  • Instruction Manual (this document)

Video 1: Product unboxing and component overview.

4. Setup and Installation

Tools Required: Screwdriver, Wire Strippers, Drill (if needed for anchors), Ladder.

  1. Turn off Power: Ensure the power supply to the installation area is completely turned off at the circuit breaker.
  2. Prepare Ceiling Base: Attach the mounting bracket to the junction box in the ceiling using the provided screws.
  3. Adjust Cord Length: The power cord length for each butterfly unit is adjustable up to 1.8 meters. Loosen the cord grip on the ceiling base, adjust each butterfly to your desired height, and then securely tighten the cord grip.
  4. Wiring: Connect the fixture's wires to your household electrical wires. Typically, connect live to live (black/brown), neutral to neutral (white/blue), and ground to ground (green/yellow-green). Use appropriate wire connectors and ensure all connections are secure.
  5. Attach Ceiling Base: Carefully push the wired ceiling base up to the mounting bracket and secure it with the provided screws. Ensure no wires are pinched.
  6. Test Light: Restore power at the circuit breaker and test the light fixture. If it functions correctly, proceed. If not, turn off power and recheck connections.
Multi-language installation diagrams showing steps to mount the ceiling base and connect wires.

Figure 2: General installation steps for pendant lights, including mounting the base and wiring connections.

Close-up view of the electroplated metal lamp body, acrylic lampshade, and thickened metal base with adjustable cord mechanism.

Figure 3: Key components of the pendant light: electroplated metal body, acrylic lampshade, and adjustable metal base.

5. Operating Instructions

Your pendant light features three color temperature settings:

  • Warm Light (3000K): Provides a cozy and inviting ambiance.
  • Natural Light (4500K): Offers a balanced and comfortable illumination, ideal for general tasks.
  • White Light (6000K): Delivers bright, clear light suitable for focused activities.

To change the light color, simply toggle your standard wall light switch OFF and ON again. Each toggle will cycle through the available color temperatures.

Three images showing the pendant light illuminated in 3000K Warm Light, 4500K Natural Light, and 6000K White Light.

Figure 4: The three adjustable light color temperatures: Warm, Natural, and White.

Note: This fixture is not dimmable. Do not connect it to a dimmer switch.

6. Maintenance

  • Cleaning: Always turn off the power before cleaning. Use a soft, dry, or slightly damp cloth to wipe the fixture. Do not use abrasive cleaners, solvents, or any chemicals that could damage the finish or acrylic.
  • Bulb Replacement: The LED light source is integrated and not user-replaceable. If the LEDs fail, please contact customer support.
  • Inspection: Periodically check all connections and mounting hardware to ensure they remain secure.

7. Troubleshooting

ProblemPossible CauseSolution
Light does not turn onNo power supply; Loose wiring; Faulty switchCheck circuit breaker; Ensure all wires are securely connected (power off first); Test wall switch.
Light flickersLoose wiring; Incompatible switch (e.g., dimmer)Check wiring connections (power off first); Ensure no dimmer switch is used.
Incorrect light colorSwitch not toggled correctlyToggle the wall switch OFF and ON again to cycle through colors.

If you experience persistent issues not covered here, please contact customer support.

8. Specifications

FeatureDetail
Model NumberXFXHE
Brand Nameludengchaoshi
Item TypePendant Lights
StyleModern Style
MaterialMetal (Hardware) + Acrylic
FinishIron (Forged)
Lampshade ColorGold (for metal parts)
Light SourceIntegrated LED
Color Temperature3-color (3000K Warm, 4500K Natural, 6000K White)
Is DimmableNo
Voltage90 - 260 V AC
Power SourceAC
Luminous Flux2000-82000 (range)
Lighting Area5-10 square meters (per unit)
Unit Dimensions (each butterfly)L20cm * W18cm * H15cm
Cord LengthAdjustable up to 1.8 meters
Installation TypeCord Pendant (self-contained)
CertificationsCE, ROHS
Recommended PlaceParlor, Study, Master Bedroom, Other Bedrooms, Hotel Hall, Hotel Room, Restaurant
Diagram showing the dimensions of the butterfly pendant light: 20cm length, 18cm width, 15cm height, and 1.8m adjustable power cord length.

Figure 5: Dimensions and specifications of the butterfly pendant light.

9. Warranty and Support

This product comes with a 2-year warranty from the date of purchase, covering manufacturing defects. The warranty does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.

For warranty claims, technical support, or any questions regarding your product, please contact the seller directly through your purchase platform.

10. User Tips

  • Upon receiving the product, carefully inspect all components for any damage or missing parts before beginning installation.
  • Ensure all electrical connections are secure and properly insulated during installation to prevent electrical hazards.
  • Consider the adjustable cord length to create varying visual effects and light distribution in your space.

© 2024 ludengchaoshi. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.