1. Safety Precautions
Please read and follow all safety instructions carefully before operating the electric tricycle.
- Follow these instructions to effectively reduce risks. When in public areas, obey national and local regulations, remain vigilant while riding, and maintain a safe distance from others and vehicles.
- Operate according to this user manual. Any loss caused by not following instructions is the user's responsibility.
- This product is not a professional off-road bike; do not use it according to off-road standards.
- For first-time riders, keep away from children, pedestrians, pets, vehicles, and other obstacles. Familiarize yourself with the tricycle before riding on public roads.
- Before each ride, carefully check all parts and screws to ensure proper function. If you notice any unusual noise, stop riding immediately and contact support.
- To avoid injuries, read and follow all "Caution", "Danger", and "Warning" instructions. Do not speed or ride on motorized roads under any circumstances.
- Ride carefully in snow, rain, wet conditions, ice, and other bad weather. Avoid riding over excessively high or large obstacles, as this may cause loss of balance, grip, and injuries.
- Do not attempt to charge the tricycle if the charger or power supply is wet. Follow local safety regulations for public charging.
2. Product Overview
2.1 Bike Overview
The Cysum AG1 PRO Electric Tricycle is designed for comfortable and convenient commuting and utility. It features a robust 750W motor and a 48V 20AH removable lithium battery, providing ample power and range for daily use, cargo transport, and leisure.

2.2 Packing List
Ensure all items are present upon unboxing:
- Electric Tricycle (main unit) x1
- Handlebar x1
- Front Light x1
- Front Wheel x1
- Front Wheel Screws x1 set
- Charger x1
- User Manual x1
2.3 Bike Diagrams
Familiarize yourself with the components of your electric tricycle:

Key Components: Saddle, Rear Light, Battery, Disc Brakes, Tire, Motor, Rear Derailleur, Chain, Display, Handlebar, Front Suspension Fork, Headlight, Front Fender, Front Wheel, Pedal, Crank, Chain Guard.
2.4 Function Description (Handlebar Controls)
The handlebar features an intuitive control layout for easy operation:

- Colorful LCD Display (NFC): Shows battery status, speed, gear position, and mileage. Supports NFC card unlocking for quick power-on.
- Brake Levers: Front and Rear brake controls.
- Throttle: Controls motor speed.
- Reversing Gear: Activates reverse function.
- Turn Signal: For indicating turns.
- Light/Horn Switch: Controls headlights and horn.
- Acceleration/Deceleration Buttons: Adjust power assist levels.
3. Setup Guide
3.1 Handlebar Installation
- Insert the stem into the fork tube, ensuring it does not exceed the safety mark.
- Adjust the handlebar height for a comfortable riding position.
- Tighten the handlebar clamp bolts securely.
- Align the front wheel with the fork arms, ensuring it is fully seated.
- Insert the axle screws into the axle holes, ensuring proper alignment.
- Tighten the screws securely with a wrench, but do not overtighten.
3.2 Fenders & Headlights Installation
- Pass the front fender through the rear of the front fork.
- Position the headlight into the front of the fork.
- Pass the screws through to secure the fender and headlight.
- Use an open-end wrench and Allen tool to lock the screws and nuts.
- Adjust the headlight angle and lock it with its screws.
- Route the headlight cable through the center of the fork to the back.
- Connect the headlight cable sockets, matching colors, to complete the installation.
3.3 Pedal Installation
Use the open spanner from the tools bag to screw the pedal shaft into the threaded hole on the crank arm. Tighten it in the direction of the arrow indicated on the pedal.
3.4 Seat Adjustment
Adjust the seat to an appropriate riding height. The recommended height is when the saddle is level with your pelvis when standing naturally. Ensure the seat post does not exceed the safety line marked on it.
4. Operating Instructions
4.1 Power On/Off
To turn on the tricycle, long press the "M" button on the display. To turn off, long press the "M" button again.
4.2 Power Assisted Gear Adjustment
You can switch between riding modes and power assist levels based on road conditions and personal preference:
- Electric Mode: Gently press the electric mode button to engage pure electric mode. The more you press, the faster the speed.
- Power Assisted Mode: The tricycle has 3 or 5 power assist gears. Click the power assisted gear button to switch gears. Lower gears are suitable for flat roads, while higher gears are for slopes or when more assistance is needed.
4.3 Starting to Ride
Before starting, ensure you are wearing appropriate protective gear, such as a helmet.
4.4 Braking
The left lever controls the front brake, and the right lever controls the rear brake. Apply brakes smoothly and gradually to maintain control.
4.5 Reversing Operation
The tricycle is equipped with a reverse function for easier maneuvering:

- Turn the reversing key to the left.
- Twist the throttle to engage reverse motion.
5. Charging Instructions
The battery comes with a small amount of charge. Fully charge the battery before its first use.
- Charging Connection: Connect the charger's output plug to the tricycle's charging port, then plug the charger into a power outlet.
- Charging Indicator: The charger's indicator light will be red during normal charging. It will turn green when fully charged.
- Charging Time: A full charge typically takes 5-7 hours, depending on the battery's current state.
- Disconnecting: Once the indicator light is green, first unplug the charger from the power outlet, then disconnect it from the tricycle. Close the charging port dust cover.
- Battery Type: The battery is not designed to be removed for charging; it must be charged while installed on the tricycle.
6. Maintenance & Repair
6.1 Bike Maintenance
- The tricycle is inspected and adjusted before leaving the factory. For any issues, contact support.
- Adjust wheel spokes after about half a month of riding for optimal performance.
- Regularly check tire pressure to ensure proper inflation.
- Periodically check main components (handlebar, stem, saddle, seatpost, axles, flywheel, chain, wheels) for looseness. Tighten any loose nuts or screws promptly.
- Every six months, apply #3 calcium base lubricating oil to bearings (front/middle/rear axle, front fork bowl group, pedal bearings). Apply #30 oil to the chain, brake cables, and other moving parts every two months.
- If vulnerable parts (brake lines, pads, bulbs, fuses) are damaged, replace them with identical specifications.
6.2 Motor Maintenance
- The motor is a maintenance-free, rare-earth permanent magnet DC brushless hub motor.
- Do not open the motor base or end cover after sealing.
- Keep the motor clean and free from foreign matter, corrosive liquids, or gases. Avoid knocking or baking the motor shell to prevent damage.
6.3 Battery Maintenance
- Lithium batteries are lightweight, long-lasting, and pollution-free. Their lifespan depends on usage. Charge frequently; do not store chronically discharged.
- Charge for 5-7 hours per session; do not exceed 24 hours. Lithium batteries have no memory effect.
- If storing the tricycle for extended periods, charge the battery for at least two hours every month. Do not store the battery in a fully discharged state, as this can cause irreversible damage.
6.4 Reflex Reflector Cautions
- Ensure all reflex reflectors are present. If any are missing, contact support for replacement and ensure they are installed in the original position.
- Do not change the position, modify, or disassemble the factory-fixed reflectors.
- Before each use, check that reflectors are functioning correctly and keep their surfaces clean.
- Do not cover reflectors with luggage, child seats, clothing, or other objects, as this can create a safety hazard.
7. Troubleshooting
| Error Code | Error Description | Fault Phenomenon | Fault Cause | Solution |
|---|---|---|---|---|
| 0 | Normal | Through-supply motor failure | Poor contact of regulating handlebar | Check/Change handlebar |
| 1 | Keep | Poor contact of brake cut-off switch | Check/Change brake switch | |
| 2 | Braking | Motor damage | Replace motor | |
| 3 | Assisted sensor fault | Controller damage | Replace/Repair controller | |
| 4 | 6km/h cruise | Loosened connector | Check connector | |
| 5 | Real-time cruise | Lack of range | Tire pressure deficiency | Inflate tires |
| 6 | Battery under voltage | Undercharged or faulted charger | Fully charge, check charger | |
| 7 | Motor fault | Aging battery or damaged battery | Replace battery | |
| 8 | Throttle fault | Frequent uphill, braking, overload | Use pedal mode more | |
| 9 | Controller fault | Difficulty in charging | Loosened plug | Tighten socket and connector |
| 10 | Communication reception fault | Disconnected battery cable | Check/Weld connector | |
| 11 | Communication transmission fault | Damaged charger | Replace charger | |
| 12 | BMS communication fault | Consult support | ||
| 13 | Headlight fault | Check headlight connection and bulb | ||
8. Specifications
| Feature | Specification |
|---|---|
| Model | AG1 PRO |
| Frame Material | Aluminum alloy + Electrophoretic Treatment |
| Motor | 48V 750W Brushless with Differential System |
| Power Supply | Lithium battery |
| Battery | 48V 20AH Removable Lithium Battery |
| Charging Time | 4-6 Hours |
| Max Speed | 25 KM/H (<25km/h) |
| Range per Power | 80-100 km (> 60 km) |
| Max Torque | 80 NM |
| Climbing Ability | 30° |
| Brakes | MT200 Hydraulic Disc Brake, 180mm Rotor |
| Display | Color LCD Display (NFC) |
| Tires | Front 20*2.1 Inches, Rear 16*3.0 Inches |
| Folded | Yes (stem foldable) |
| Max Load Capacity | 150 kg |
| Net Weight | 45 kg |
| Front Basket Load | 25 kg |
| Rear Basket Load | 50 kg |
| Recommended Height | 160-185 cm |
| Certification | CE |
9. Warranty & Support
9.1 Warranty Scope and Period
| Item | Parts | Guarantee Time | Service |
|---|---|---|---|
| Basic Parts | Frame | 36 months | Natural deformation, open welding, desoldering fracture, or manufacturing defects are covered. Self-modification or collision damage is not warranted. |
| Fork, Handlebar, Stem, Seatpost | 12 months | Same as above. | |
| Kickstand, Tires, Saddles, Fenders, Safety hook, Seat clamp, Stem clamp, Frame clamp, Pedals, Brakes, Brake discs, Brake levers | 3 months | Tire punctures by sharp objects or collision damage of spare parts are not warranted. | |
| Crank chain disc, Front arm set, Hub, Wheel hub, Spokes, Shift finger dial, Derailleur, Flywheel, Chain, Bottom bracket, Shock absorber | 6 months | Man-made damage, self-modification, or collision damage of parts and accessories are not warranted. | |
| Electric Parts | Controller | 12 months | Short circuit, burnout, or performance failure due to poor manufacturing are covered. Water damage, disconnections, and man-made damage are not warranted. |
| Charger, Main wiring harness | 12 months | ||
| Display instrument, Speed control knob, Booster, Controller cover plate, Headlights, Taillights, Power-off brake levers, Switches | 3-6 months | ||
| Motor Parts | Motor, Hall, Bearing, Clutch | 12 months | Phase loss, Hall element burnout, demagnetization, abnormal bearing noise are covered. Breakage or water ingress are not warranted. |
| Battery | Lithium battery | 12 months | Battery replacement for faults like broken grids, no power storage, or capacity below 70%. Water ingress or man-made damage is not warranted. |
10. User Tips
- Utilize Storage: The tricycle features a large front and rear basket. Make full use of these for groceries, packages, or personal belongings to enhance convenience.
- Regular Checks: Perform quick checks of tire pressure, brakes, and lights before each ride to ensure safety and optimal performance.
- Secure Cargo: When using the baskets, ensure all items are securely placed or tied down to prevent them from falling out during transit.
11. Compliance Statement
Disclaimer
Please be aware of potential fire risks and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with all applicable laws and regulations.