YiFanHeRong HiFi Headphone Amplifier User Manual
Model: Headphone Amplifier
1. Introduction
The YiFanHeRong HiFi Headphone Amplifier is a compact and portable audio device designed to enhance your listening experience. It supports headphones with an impedance range of 16-150 Ω, delivering clear sound without distortion. Featuring a 3.5mm AUX input and output, it is compatible with mobile phones, MP3 players, MP4 players, laptops, and PCs. The amplifier incorporates noise reduction and enhanced dynamics for a pure stereo effect and optimized sound quality, all within a stylish aluminum matte finish.
2. Package Contents
Please check the package for the following items:
- 1 x HiFi Headphone Amplifier
- 1 x 3.5mm Audio Cable
- 1 x USB Power Supply Line
- 1 x User Manual (this document and a PDF version)
3. Product Overview
Familiarize yourself with the components and controls of your HiFi Headphone Amplifier.

Figure 3.1: Front view of the HiFi Headphone Amplifier.

Figure 3.2: Amplifier with included audio and USB cables.
3.1 Top Panel Controls and Ports

Figure 3.3: Top panel with labeled controls.
- Power Switch / Volume Switch: Rotate to turn the amplifier on/off and adjust the volume.
- PWR (Power Indicator): Lights up when the device is powered on.
- INPUT (Audio Input): 3.5mm jack for connecting your audio source (e.g., phone, MP3 player).
- OUTPUT (Audio Output): 3.5mm jack for connecting your headphones.
3.2 Bottom Panel Ports and Switches

Figure 3.4: Bottom panel with labeled ports and switches.
- USB Power Interface: Micro-USB port for charging the amplifier.
- Charging Indicator: Red light indicates charging; Green light indicates fully charged.
- Gain Switch (L/H): Toggles between low (L) and high (H) gain settings to match different headphone sensitivities and impedance.
4. Setup
- Charge the Amplifier: Connect the supplied USB power supply line to the USB Power Interface on the amplifier and plug the other end into a DC 5V USB power source (e.g., computer USB port, USB wall adapter). The charging indicator will glow red while charging and turn green when fully charged.
- Connect Audio Source: Use the 3.5mm audio cable to connect your audio source (e.g., smartphone, MP3 player) to the INPUT port on the amplifier.
- Connect Headphones: Plug your headphones into the OUTPUT port on the amplifier.
5. Operating Instructions
- Power On/Off: Rotate the Power Switch / Volume Switch clockwise until you hear a click and the PWR indicator lights up. To turn off, rotate counter-clockwise until it clicks off.
- Adjust Volume: Rotate the Power Switch / Volume Switch to increase or decrease the audio volume to your desired level.
- Select Gain: Use the Gain Switch (L/H) on the bottom panel to select the appropriate gain setting. 'L' (Low) is suitable for sensitive headphones or when you need less amplification. 'H' (High) provides more power for less sensitive or higher impedance headphones.
- Playback: Start playing audio from your connected source.
Important Note: To avoid potential buzzing or hissing sounds, it is recommended not to use the amplifier while it is charging. Disconnect the USB power supply line once the amplifier is fully charged before use.
6. Maintenance
- Keep the amplifier dry and away from moisture.
- Clean the device with a soft, dry cloth. Do not use liquid cleaners or aerosols.
- Avoid exposing the amplifier to extreme temperatures or direct sunlight.
- Do not attempt to disassemble or modify the device, as this will void any potential warranty.
7. Troubleshooting
- Q: Why is there a buzzing or hissing sound during operation?
- A: This often occurs if the amplifier is used while charging. Disconnect the USB power supply line once the amplifier is fully charged. If the issue persists, ensure all cables are securely connected and try a different audio source or cable.
- Q: The amplifier doesn't provide enough volume for my headphones.
- A: This amplifier supports headphones with an impedance of 16-150 ohms. Please check the impedance of your headphones to ensure they are within this range. Also, try switching the Gain Switch to the 'H' (High) position for more amplification.
- Q: The amplifier is not turning on.
- A: Ensure the amplifier is fully charged. If it still doesn't turn on, try charging it for a longer period.
8. Specifications
| Feature | Specification |
|---|---|
| Input/Output Port | 3.5mm Audio Port |
| Distortion | 0.004% |
| Signal-to-Noise Ratio (SNR) | ≥120dB |
| Load Impedance | 16-150Ω |
| Max. Power Output | 250mW (at 16Ω impedance) |
| Amplifier Internal Voltage | ±4V |
| Charging Voltage | DC 5V |
| Frequency Response | 20Hz-20kHz (±3dB) |
| Lithium-Battery Capacity | 1000mAh |
| Approximate Usage Time | 6 Hours |
| Dimensions (L*W*H) | 9.5 x 6.2 x 1.5 cm |
| Net Weight | 160g |
| Brand Name | YiFanHeRong |
| Model Number | Headphone Amplifier |
| Built-in Battery | Yes |
| Input Type | LINE IN (AUDIO IN) |
| Output Type | LINE OUT (AUDIO OUT) |
| Origin | Mainland China |
| Certification | CE |
| Bluetooth | No |
| WIFI | No |
9. User Tips
- For the best audio experience, ensure your headphones' impedance falls within the 16-150 ohm range supported by this amplifier.
- If you experience any unwanted noise, always check if the amplifier is charging. Disconnecting it from the charger often resolves such issues.
- Experiment with the 'L' and 'H' gain settings to find the optimal volume and clarity for your specific headphones and audio source.
10. Warranty and Support
For warranty information and customer support, please refer to the seller's terms and conditions at the point of purchase. Keep your proof of purchase for any warranty claims.
A detailed user manual is also available in PDF format for download: Download PDF Manual