DIXSG P2961
Contents
DIXSG P2961 Bluetooth 5.3 Headsets User Manual
Model: P2961
1. Product Introduction
Thank you for choosing our brand's over-ear Bluetooth headset! This product is equipped with high-quality speaker units and supports Bluetooth wireless connection, combining comfortable wearing experience with clear sound quality. It is suitable for various scenarios such as music playback, voice calls and video entertainment.
2. Package Contents
- P2961 Bluetooth Headset x 1
- USB Charging Cable x 1
- 3.5mm Audio Cable x 1
- Product User Manual x 1
3. Product Overview: Parts and Functions
The P2961 headset features a thoughtful design for comfort and functionality. Below are the key components and their uses:
- Earmuffs: Built-in speaker units and microphones, made of soft material that fits the ears closely and supports a certain angle of rotation.
- Headband: Adjustable length to fit different head shapes, with a built-in telescopic buffer structure for better stability.
- Function Buttons: Located on Left/Right Earmuffs.
- Power Button: Long press to turn the headset on/off; long press in the on state to enter pairing mode; long press to answer/hang up incoming calls.
- Volume Buttons: Short press to adjust volume +/-; long press during music playback to switch to the previous/next song.
- Multi-function Button (Optional): Supports voice assistant wake-up, music pause and playback.
- Charging Port: USB charging port, located on the side of the earmuff, used to connect the charging cable for charging.
- LED Indicator Light: Displays power-on, pairing and charging status.
- TF Card Slot: For MP3 playback from a memory card.
- 3.5mm Audio Port: For wired connection using the included audio cable.

Image: Headphone button layout and product parameters. Buttons include Play/Pause/Answer Calls, Radio Reception Mode, Volume Up/Next Song, Volume Down/Previous Song. Ports include Type-C Charging Port and 3.5mm Audio Cable Interface.

Image: Close-up of the headphone ports, showing TF card slot, Type-C charging port, and 3.5mm audio jack.
4. Setup: First Pairing and Connection
- Long press the power button for 3 seconds until the indicator light flashes alternately red and blue. The headset will then enter pairing mode.
- Turn on the Bluetooth function on your mobile phone, tablet, or computer, and search for Bluetooth devices.
- Find the Bluetooth name [M5] of this headset in the device list and click to connect.
- After a successful connection, the indicator light will turn solid blue, and the headset will emit a voice prompt.
- For subsequent use, the headset will automatically connect to the last paired device after being turned on.
Video: A visual demonstration of the P2961 headphones in various colors, showcasing their design and features.
5. Operating Instructions
5.1 Basic Operations
- Power On/Off: Long press the power button for 3 seconds.
- Call Control: Short press to answer incoming calls; long press to reject incoming calls; double press to redial the last call.
- Music Control: Short press to play/pause music during playback.
- Mode Switch (Button M): Short press to switch between Bluetooth mode and MP3 mode.
5.2 Track and Volume Adjustment
- Next Song/Volume + Button: In Bluetooth/MP3 mode, short press to switch to the next song; long press to increase the volume.
- Previous Song/Volume - Button: In Bluetooth/MP3 mode, short press to switch to the previous song; long press to decrease the volume.
5.3 Indicator Light Status
- Bluetooth Mode: Blue light flashes quickly during pairing; solid blue after successful pairing.
- MP3 Mode: Blue light flashes slowly during music playback.
- Charging Mode: Solid red during charging; indicator light turns off when charging is completed.
5.4 LINE External Audio Input Operation
- When the audio cable is inserted, the headset will automatically switch to AUX LINE IN mode. In this mode, the headset functions as an ordinary over-ear headset, and all buttons are inactive.
- Supports external audio input from mobile phones, MP3 players, CD players, laptops, and other devices.
6. Maintenance
6.1 Charging Notes
- Please use a regular brand charger with a specification of 5V/1A for charging. Avoid using high-voltage chargers to prevent battery damage.
- It is normal for the headset to heat up slightly during charging. If there is any abnormality such as severe heating or peculiar smell, please disconnect the power supply immediately.
- When the headset is not in use for a long time, it is recommended to charge the battery to about 50%, store it in a dry and cool place, and replenish the battery every 1-2 months.
6.2 Wearing and Using Notes
- Please operate gently when adjusting the length of the headband to avoid damage caused by violent stretching.
- When the earmuffs are dirty, you can wipe them gently with a clean soft cloth dipped in a small amount of water. Do not soak the headset or use corrosive cleaning agents.
- Avoid using the headset in high-temperature, humid, or dusty environments to prevent damage to internal components.

Image: The headphones demonstrating their foldable design for convenient storage.

Image: Close-up of the adjustable headband mechanism, highlighting its durability and flexibility.
7. Common Troubleshooting
| Troubleshooting Phenomenon | Possible Causes | Solutions |
|---|---|---|
| Unable to turn on the headset | Power exhausted | Connect to power supply and charge for 30 minutes, then try to turn it on again. |
| Bluetooth cannot find the headset | Not in pairing mode | Long press the power button until the red and blue lights flash alternately, then restart the terminal's Bluetooth. |
| No sound output after connection | Volume too low or terminal in mute mode | Turn up the volume of the headset and terminal, and turn off the terminal's mute mode. |
| The other party cannot hear the sound during a call | Microphone blocked | Check if the earmuff microphone is blocked by foreign objects and adjust the wearing position. |
| Intermittent sound quality and frequent disconnection | Too far distance or wireless interference | Move closer to the Bluetooth device and stay away from interference sources such as routers and microwave ovens. |
8. Specifications
| Feature | Detail |
|---|---|
| USB Charging Input | DC 5V IN |
| Signal-to-Noise Ratio | 88dB |
| Bluetooth Effective Distance | Up to 10 Meters |
| Output Power | 35mW |
| Bluetooth Working Frequency | 2.401-2.480GHz |
| Charging Time | 2-3 Hours |
| Continuous Call Duration | 6 Hours |
| Standby Time | 100 Hours |
| Battery Capacity | 280 mAh |
| Music Playback Time | 10-20 Hours (at 70% volume) |
| Impedance Range | Up to 32 Ω |
| Bluetooth Version | 5.3 |
| Active Noise-Cancellation | Yes |
| Material | PVC (earmuffs), ABS (headband) |

Image: Diagram highlighting key features such as skin-friendly breathable ear muffs, 120H ultra-long standby time, 38MS low latency, soft and skin-friendly ear pads, upgraded Bluetooth V5.3, and spatial sound.

Image: Close-up of the headphone showing the Bluetooth V5.3 chip integration.
9. User Tips
- Check Both Sides: If you experience sound from only one side, ensure the headphones are fully charged and properly paired. Sometimes a quick re-pairing can resolve this.
- Size Expectation: Be aware that the headphones might appear smaller in person than in some promotional images. Refer to the product dimensions for accurate sizing.
- Charging: Always use a 5V/1A charger to avoid battery damage.
10. Safety Warnings
10.1 General Safety Tips
- When using the headset during traffic activities such as riding and driving, please pay attention to the surrounding environment to ensure safety.
- Do not play music at high volume for a long time to avoid hearing damage.
10.2 Choking Hazard Warning
WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years. To be used under direct supervision of an adult.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official product website or contact the retailer where you purchased the product. Keep your purchase receipt for warranty claims.
A PDF version of this user manual is available for download: Download User Manual (PDF)
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.