WEST BIKING Smart Bike Taillight

Contents

WEST BIKING Smart Bike Taillight

User Instruction Manual

1. Introduction

Thank you for choosing the WEST BIKING Smart Bike Taillight. This device is designed to enhance your safety during cycling by providing intelligent rear visibility. Featuring smart brake sensing, automatic light adjustment, multiple lighting modes, and a durable waterproof design, it ensures you are seen in various riding conditions.

Video: Overview of WEST BIKING Smart Bike Taillight features and operation.

2. Package Contents

Please check the package for the following items:

  • 1 x Smart Bike Taillight Unit
  • 1 x Seatpost Mounting Bracket
  • 1 x Seat Bow Mounting Bracket
  • 1 x Type-C USB Charging Cable
  • 1 x Hex Key (Allen Wrench)
  • 1 x Mounting Screw
  • 1 x Rubber Ring/Gasket
Package contents of the taillight including the light unit, two brackets, USB cable, and tools.

Image: All components included in the WEST BIKING Smart Bike Taillight package.

3. Specifications

FeatureDescription
BrandWEST BIKING
Model NameSmart Bike Tail Light
Body MaterialPC (Plastic)
Light SourceSMD LED
Dimensions25.4mm (W) x 31mm (D) x 105.8mm (H)
WeightApprox. 29g
Battery400 mAh Lithium Battery
Charging PortType-C USB
Waterproof RatingIPX6
Intelligent FeaturesBrake Sensor, Light Sensor, Automatic Wake-up/Sleep
Mounting PlacementSeatpost, Seat Bow

Lighting Modes & Battery Life:

  • Constant Light: 7LM, Approx. 6 Hours
  • Fast Flash: 11LM, Approx. 5 Hours
  • Slow Flash: 3LM, Approx. 10 Hours
  • Warning Flash: 11LM, Approx. 8.5 Hours
  • Breathing Flash: 11LM, Approx. 5.5 Hours
  • Navigation Light: 3LM, Approx. 10 Hours
Diagram showing the dimensions of the taillight: 105.8mm length, 31mm width, 25.4mm depth, 15mm thickness.

Image: Detailed dimensions of the taillight unit.

4. Setup and Installation

Before installation, ensure the taillight is fully charged. Choose an unobstructed position on your bicycle for optimal visibility.

4.1 Seat Bow Installation

  1. Attach the seat bow bracket to the underside of your bicycle seat rails.
  2. Secure the bracket firmly using the provided screw and hex key.
  3. Slide the taillight unit onto the bracket until it clicks into place.
Four-step visual guide for installing the taillight onto the seat bow of a bicycle.

Image: Step-by-step guide for seat bow installation.

4.2 Seat Tube Installation

  1. Wrap the seat tube bracket around your bicycle's seatpost.
  2. Tighten the bracket securely using the provided screw and hex key. Ensure the rubber gasket is in place to prevent slippage.
  3. Slide the taillight unit onto the bracket until it clicks into place.
Four-step visual guide for installing the taillight onto the seat tube of a bicycle.

Image: Step-by-step guide for seat tube installation.

4.3 Angle Adjustment

After installation, adjust the taillight's angle so it faces directly backward, slightly tilted downwards, to maximize visibility to traffic behind you.

5. Operating Instructions

Diagram showing the components of the taillight: Brake Light, Light Mode Button, Light Sensor, Normal Mode Button, Battery Indicator Light, Light-Emitting Lamp, Charging Port.

Image: Overview of the taillight's buttons and sensors.

5.1 Power On/Off

  • To Turn On: Short press either the Left Button (Normal Mode) or Right Button (Smart Mode).
  • To Turn Off: Press and hold either button for 1 second.

5.2 Lighting Modes

The taillight offers multiple lighting modes to suit different riding conditions.

Six different lighting modes of the taillight: Constant Light, Fast Flash, Slow Flash, Warning Flash, Breathing Flash, and Navigation Light, with approximate battery life for each.

Image: Visual representation of the six available lighting modes.

Normal Mode (Left Button)

  • Mode Switching: Short press the Left Button to cycle through modes: Constant Light → Fast Flash → Slow Flash → Warning Flash → Breathing Flash → Navigation Light.
  • Memory Function: When turned off and on again, the taillight will resume the last used mode.

Light-Sensitive (Smart) Mode (Right Button)

  • Activation: Short press the Right Button to enter Light-Sensitive Mode.
  • Automatic Adjustment: The taillight will automatically adjust its brightness or turn off based on ambient light conditions. It will switch to Normal Mode if ambient light is too weak.

5.3 Intelligent Features

Brake Sensor Function

The brake sensor is active by default in both Normal and Light-Sensitive modes.

  • When braking is detected, the taillight will highlight (increase brightness or flash intensely) to warn following traffic.
  • This function operates across all lighting modes, providing an extra layer of safety.
Image showing the taillight illuminating brightly with a long red beam, indicating the intelligent brake sensor is active.

Image: Taillight activating its bright brake warning light.

Automatic Sleep and Wake-up

  • If the taillight detects no movement for 30 seconds, it will automatically enter sleep mode to conserve battery.
  • Upon sensing vibration (e.g., when you start riding), the taillight will automatically wake up and resume its previous state.
Two images showing the taillight in active mode (vibration automatic wake-up) and off mode (static automatic shutdown).

Image: Taillight demonstrating automatic sleep and wake-up functions.

5.4 Charging

The taillight is equipped with a 400 mAh Lithium Battery and charges via a Type-C USB port.

  • To Charge: Open the waterproof cover of the Type-C port, connect the provided USB cable to the taillight and a standard USB power source (e.g., computer, wall adapter).
  • Battery Indicator (when in use):
    • Indicator Off: Battery > 10%
    • Indicator Always On: Battery ≤ 10%
  • Charging Indicator:
    • Breathing Flash: Battery ≤ 99% (charging)
    • Always On: Battery > 99% (fully charged)
  • Once fully charged, disconnect the cable and securely close the waterproof cover.
Image showing the taillight with a Type-C charging cable connected, and a diagram explaining the battery indicator lights for in-use and charging states.

Image: Type-C charging interface and battery indicator guide.

6. Maintenance

6.1 Cleaning

After each ride, wipe the taillight's surface with a clean, soft, damp cloth to remove dust, mud, or water. Ensure the surface is dry before storage. Do not use strong acids, alkalis, alcohol, or abrasive materials, as these can damage the casing, reflective sheet, or LED beads.

6.2 Battery Care

  • If not used for an extended period, recharge the taillight every 1-2 months to prevent over-discharge and prolong battery life.
  • Avoid using high-power fast chargers or non-original charging cables, which can damage the battery.

6.3 Regular Inspection

Before each ride, check the taillight's brightness, ensure mode switching works correctly, and verify that the mounting bracket is securely fastened. Confirm the waterproof plug is properly sealed. Ensure sufficient battery charge for your planned ride.

6.4 Storage

Store the taillight in a dry, well-ventilated, and cool place when not in use. Avoid high temperatures, direct sunlight, open flames, heavy pressure, or dropping, as these can cause deformation, battery bulging, or damage to accessories.

7. Troubleshooting

  • Light Not Working or Fails to Turn On: Recharge the taillight. Check if the mounting is obstructing the button. Clean any impurities around the button.
  • Dim Light or Abnormal Flashing: Fully charge the taillight. Clean the lamp bead and reflective surface. If the issue persists, the battery might be aged; consider replacing the unit if it's beyond its service life.
  • Loose or Falls Off: Re-tighten the mounting bracket and strap. Ensure the taillight unit is fully engaged with the bracket. Add the rubber gasket if it's missing to improve grip.
  • Abnormal Charging or Unable to Charge: Clean any dust or impurities from the charging port. Try using a different, original Type-C USB cable. Ensure the waterproof plug is properly closed when not charging. If the port is oxidized or damaged, discontinue use and replace the product.

8. User Tips

  • Always ensure your taillight is fully charged before embarking on longer rides, especially at night or in low-visibility conditions.
  • Regularly check the security of your taillight's mounting to prevent it from falling off during your ride.
  • Utilize the smart (light-sensitive) mode for convenience and to optimize battery life, as it automatically adjusts to ambient conditions.
  • Even with the smart brake sensor, always practice safe cycling habits and be aware of your surroundings.

9. Safety Information

  • This taillight is a cycling safety accessory and cannot replace traffic signals or eliminate all traffic accidents. Always observe road conditions and take precautions.
  • Charge or replace batteries immediately if the light dims, flashes abnormally, or fails to turn on. Do not use a faulty taillight.
  • Do not disassemble or modify the internal structure of the taillight, or replace lamp beads/batteries privately, to prevent short circuits or injury.
  • Children should use this product under adult supervision. Keep button batteries (if applicable) away from children to prevent ingestion.
  • Discontinue use immediately and replace the product if there is water ingress, shell cracking, or battery bulging.
  • Avoid prolonged exposure to high temperatures (e.g., car dashboards) to prevent battery aging, plastic deformation, and reflective layer failure.
  • Ensure the mounting is moderately tight; over-tightening can damage the seatpost/frame, while loose mounting can cause the light to fall off.
  • Dispose of waste batteries and taillights according to local environmental protection regulations. This product is only for bicycles and light electric-assisted vehicles; it is not for motor vehicles, extreme sports, or underwater use.

10. Warranty and Support

For warranty claims or technical support, please contact your retailer or WEST BIKING customer service with your purchase details. Keep your proof of purchase for warranty validation.

For the latest product information and support, please visit the official WEST BIKING website.

A PDF user manual is available for download from the seller's product page for more detailed information.

© 2024 WEST BIKING. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.