Heroad VT200

Contents

QCY Heroad VT200 Gaming Headset User Manual

Model: VT200 | Brand: Heroad

Introduction

This manual provides detailed instructions for the QCY Heroad VT200 Tri-Mode Wireless Gaming Headset. Please read this manual carefully before use and retain it for future reference to ensure optimal performance and safety.

The QCY Heroad VT200 is a versatile gaming headset designed for an immersive audio experience across multiple platforms, featuring 7.1 virtual surround sound, a 53mm dynamic driver, ultra-low latency, and tri-mode connectivity (2.4GHz Wireless, Bluetooth 6.0, and 3.5mm Wired).

QCY Heroad VT200 Gaming Headset

Image: QCY Heroad VT200 Gaming Headset in black and red.

What's in the Box

Upon unboxing your QCY Heroad VT200 headset, please ensure all the following items are present:

  • QCY Heroad VT200 Headset
  • Detachable Microphone
  • Type-C Charging Cable
  • Audio Cable (3.5mm)
  • 2.4GHz Wireless Receiver (USB-A with USB-C adapter)
  • User Manual (this document)
Contents of the QCY Heroad VT200 box

Image: Diagram showing the headset, detachable microphone, charging cable, audio cable, receiver, and user manual laid out from the box.

Video: An unboxing demonstration of the QCY Heroad VT200 headset and its accessories.

Product Overview

Familiarize yourself with the various components and controls of your QCY Heroad VT200 headset.

Diagram of QCY Heroad VT200 headset controls

Image: Detailed diagram highlighting the control buttons on the headset: 1. Volume +/-, 2. Power On/Off, 3. Mode Switch, 4. Mic Button, Detachable Mic, and Type-C Charging Port.

  • Volume +/-: Adjusts audio volume.
  • Power On/Off: Powers the headset on or off.
  • Mode Switch: Toggles between 2.4GHz Wireless, Bluetooth, and 3.5mm Wired modes.
  • Mic Button: Mutes/unmutes the microphone.
  • Detachable Mic: Connects to the headset for voice communication.
  • Type-C Charging Port: Used for charging the headset.

Setup and Connection

The QCY Heroad VT200 offers three connection modes: Bluetooth, 2.4GHz Wireless, and 3.5mm Wired.

1. Bluetooth Mode

  1. Power On: Press and hold the Power button for 3 seconds to turn on the headset. The blue light will flash.
  2. Switch to Bluetooth Mode: Press the Mode Switch button once. (By default, the headset starts in Bluetooth mode on first use).
  3. Pairing: On your mobile device, turn on Bluetooth, search for "QCY Heroad VT200", and tap to connect.
  4. Reconnection: If there is a previous connection record, the headset will automatically reconnect to the previously paired device when powered on.

2. 2.4GHz Wireless Mode

  1. Insert Receiver: Insert the 2.4GHz wireless receiver into your device's USB port (use the USB-C adapter if needed). The receiver's red and blue lights will flash.
  2. Switch to 2.4GHz Mode: Press the Mode Switch button once on the headset to switch to 2.4GHz mode.
  3. Connection: The headset and receiver will connect automatically. Once connected successfully, the blue light on the receiver will stay on.

3. 3.5mm Wired Mode

  1. Connect Audio Cable: Plug the 3.5mm audio cable into the headset's audio jack and the other end into your device's 3.5mm audio port.
  2. Operation: In wired mode, the headset's buttons (Power, Volume, Mode Switch, Mic) are disabled. Audio and microphone functions are controlled directly by the connected device.
Three-Mode Connectivity Diagram

Image: Illustration of the three connection modes: 2.4GHz Wireless (USB dongle), Bluetooth 6.0, and 3.5mm Wired, showing compatibility with various devices like PC, laptop, and mobile phones.

Operating Instructions

Power On/Off

  • Power On: Long press the Power button for 3 seconds.
  • Power Off: Long press the Power button for 3 seconds.

Music Playback

  • Play/Pause: Press the Power button once.
  • Next Track: Long press Volume + button for 2 seconds.
  • Previous Track: Long press Volume - button for 2 seconds.
  • Volume Up: Press Volume + button once.
  • Volume Down: Press Volume - button once.

Video: A short clip demonstrating how to adjust the volume on the headset while connected to a mobile phone.

Answering Calls

  • Answer/End Call: Press the Power button once.
  • Reject Incoming Call: Double-press the Power button.

Other Functions

  • Mode Switching: Press the Mode Switch button once to cycle through 2.4GHz Wireless, Bluetooth, and 3.5mm Wired modes.
  • Sound Mode: Double-press the Mode Switch button to change sound modes (Game, Music, Movie).
  • Voice Assistant: Triple-press the Mode Switch button to activate your device's voice assistant.
  • Mic On/Off: Press the Mic button once to mute or unmute the microphone.

Driver Software and Customization

To unlock the full potential of your QCY Heroad VT200 headset, including personalized EQ tuning, MIC Gain control, and Magic Voice effects, install the dedicated driver software on your PC.

  1. Visit QCY Website: Go to the official QCY website.
  2. Navigate to Support: Find "Support Center" -> "Product Support" -> "Heroad".
  3. Locate Driver: Find "VT200 Pro" and click on "Documents & Drivers".
  4. Download Driver: Download the "Heroad VT200 Pro PC Driver" (compatible with Windows 10/11 operating systems only).
  5. Installation: Follow the on-screen installation guide to complete the setup. Once installed, you can access and customize all features.
Driver Software Interface for QCY Heroad VT200

Image: Screenshot of the QCY Heroad VT200 driver software interface, showing options for speaker and microphone settings, EQ customization, and voice changer effects.

LED Indicator Behavior

The LED indicators provide visual feedback on the headset's status.

Headset Battery Indicator

  • Red light flashing slowly 3 times every 5 seconds: Low battery
  • Red light steady: Charging
  • Blue light steady: Fully charged

Bluetooth Pairing Indicator

  • Blue light flashing: Pairing mode
  • Blue light steady: Connected
  • Blue light flashing (after connection): Auto-reconnecting

2.4GHz Pairing Indicator

  • White light flashing: Pairing mode
  • White light steady: Connected
  • White light flashing (after connection): Auto-reconnecting

Troubleshooting

If you encounter any issues with your QCY Heroad VT200 headset, refer to the solutions below.

Q: Why can't the headset pair with my mobile phone?
A: Check if your headset is in pairing or re-connection mode, and if your mobile device's Bluetooth is enabled. If so, go to your device's Bluetooth menu, delete/forget the headset's Bluetooth pairing name, then try to reconnect following the setup steps.
Q: Why is the connection unstable or cuts out intermittently?
A: Check for metal objects or obstacles nearby that might interfere with the Bluetooth connection. Bluetooth is a radio technology sensitive to objects between the headset and other devices. Also, strong Wi-Fi, 5G, or 4G signals, or high-power electrical appliances can cause interference. Try changing your environment or re-pairing.
Q: Why do I experience a delay in video watching or game playing?
A: Delays can occur due to environmental factors, network conditions, and mobile phone codec. These factors can cause varying degrees of audio data transmission delay to the headset.
Q: Why can't my headset turn on?
A: Recharge the headset and ensure it has sufficient battery power. If it's fully charged and still unresponsive, or if it cannot charge, contact customer support for warranty service.
Q: The headphones can't connect to the APP?
A: Try setting the language of the application to English before connecting the headphones.

Factory Reset

To clear pairing records and restore factory settings:

  1. Ensure the headset is in Bluetooth mode.
  2. Press and hold both the Volume + and Volume - buttons simultaneously for 5 seconds.
  3. The red and blue lights will flash three times, indicating a successful reset. The headset will then re-enter pairing mode.

Specifications

FeatureDetail
Connection2.4GHz Wireless, Bluetooth 6.0, AUX 3.5mm
Audio CodecSBC
Speaker Driver53mm Neodymium Dynamic Driver
Frequency Range20Hz - 20kHz
MicrophoneOmni-directional Electret Condenser (Detachable)
Play Time (Bluetooth)Approx. 60 hours
Standby Time (Bluetooth)Up to 130 hours
Charging TimeApprox. 2 hours
Speaker Impedance16Ω ± 15%
Speaker Sensitivity105dB ± 3dB
Battery Capacity1000mAh (Lithium Polymer)
Charging InputDC 5V = 1A
Headset WeightApprox. 300g
Sound Technology7.1 Surround Sound
LatencyUltra Low Latency (<20ms on 2.4GHz)
Platform CompatibilityPC, laptop, PS4/5, Switch and other USB interface devices
MaterialLeather, PC, ABS, Silica Gel, Metal
CertificationsCE, RoHS, BQB
QCY Heroad VT200 Specifications Summary

Image: A visual summary of the QCY Heroad VT200's key features and specifications.

User Tips

  • The headset is noted for its comfort, even during long listening sessions, thanks to its lightweight design, protein PU leather ear cushions, and adjustable padded headband.
  • Users appreciate the versatility of the tri-mode connectivity (2.4GHz, Bluetooth, Wired) for various devices.
  • The sound quality is generally well-received for its price point, offering clear sound and good bass.
  • The detachable noise-canceling microphone is a highlight for clear communication.
  • For Xbox Series X wireless connection, direct Bluetooth audio for gaming is not guaranteed, and 2.4GHz compatibility needs to be confirmed as it may not work directly.

Safety Information

Please observe the following safety guidelines to prevent damage to the product or personal injury:

  • Always read and retain the user manual.
  • Fully charge the product before first-time use.
  • If unused for over two weeks, recharge the headset.
  • Use only chargers from legitimate manufacturers certified by national safety authorities.
  • Do not disassemble or modify the battery. Do not insert foreign objects, expose to high temperatures, or immerse in water or other liquids to prevent leakage, overheating, ignition, or explosion. Battery replacement should only be done by the manufacturer.
  • Avoid dropping, crushing, or puncturing the battery. Prevent external pressure that may lead to internal short circuits and overheating.
  • Do not dismantle or modify the product for any reason, as it may result in fire, electronic breakdown, or permanent damage.
  • Do not expose the product to extremely low (below 0°C) or high (above 45°C) temperatures.
  • Do not direct the product's indicator light towards the eyes of children or animals.
  • Do not use the product during thunderstorms, as it may cause abnormal operation and increase the risk of electric shock.
  • Do not use oil or other volatile liquids to clean the product.
  • Prolonged use of headphones at high volume may cause hearing damage. Manage your listening time and volume levels responsibly.

Hazardous Substances Statement

This product complies with environmental protection requirements. The table below indicates the presence of hazardous substances.

Part NameLead (Pb)Mercury (Hg)Cadmium (Cd)Hexavalent Chromium (Cr(VI))Polybrominated Biphenyls (PBB)Polybrominated Diphenyl Ethers (PBDE)
HousingOOOOOO
Circuit BoardXOOOOO
CablesOOOOOO
BatteryOOOOOO

O: Indicates that the hazardous substance content in all homogeneous materials of this part is below the limit specified in GB/T 26572.

X: Indicates that the hazardous substance content in at least one homogeneous material of this part exceeds the limit specified in GB/T 26572.

Environmental Protection Use Period: Under normal use conditions, the environmental protection use period of this product is 10 years. During this period, the product will not leak any hazardous substances and can be recycled according to local regulations.

Warranty and Support

Warranty Period

QCY products come with a 12-month warranty period from the date of delivery. Please keep your proof of purchase.

Warranty Service

  • Within 7 days of purchase: If a product fault is confirmed by a QCY after-sales service center, you are entitled to free repair, replacement, or return.
  • Within 15 days of purchase: If a product fault is confirmed by a QCY after-sales service center, you are entitled to free repair or replacement.
  • Within 12 months of purchase: If a product fault is confirmed by a QCY after-sales service center, you are entitled to free repair.

Conditions Not Covered by Warranty

The manufacturer's warranty is void under the following circumstances (but not limited to):

  • Lost, stolen, or free products.
  • Items that have expired their warranty period.
  • Products without sufficient proof of purchase.
  • Improper or inadequate maintenance or modification.
  • Accident, misuse, abuse, contamination, or other external causes.
  • The use of unspecified adapters and accessories.
  • Malfunctions or damages resulting from natural disasters, earthquakes, lightning, abnormal voltage, or environmental factors.
  • Damages that occur as a result of failure to follow the instructions in this manual.

Contact Information

For after-sales service or further inquiries, please contact:

  • Email: support@qcymall.com
  • Website: www.qcy.com
  • User Manual PDF: A PDF version of the user manual can be found at this link.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.