Suetlcoity CLA GLA Class C117 X156 2014-2016

Contents

Product Manual of Car Decorative Accessories

Brand: Suetlcoity

Model: Air Conditioning Vent Frame Trim for Mercedes Benz CLA GLA Class C117 X156 (2014-2016)

1. Product Overview

This car decoration accessory is designed to enhance your vehicle's aesthetic appeal while protecting vulnerable surfaces from scratches, dust, and minor impacts. The product features high-quality 3M adhesive tape for secure, long-lasting installation without damaging your car's original finish.

The product is 100% brand new and made from durable ABS material. It is available in Carbon Fiber Pattern and Silvery finishes.

Two silvery vent frame trims on a white background.
Image: Two silvery vent frame trims, showcasing the product components.
Close-up of a silvery vent frame trim.
Image: Close-up of the silvery finish option.
Close-up of a carbon fiber pattern vent frame trim.
Image: Close-up of the carbon fiber pattern finish option.

2. Specifications

Attribute Value
Brand Name Suetlcoity
Item Type Interior Mouldings
Material ABS
Color Options Carbon Fiber Pattern, Silvery
Applicable Models Mercedes Benz CLA GLA Class C117 X156
Applicable Years 2014-2016
External Testing Certification ISO9001
Origin Mainland China
Package Weight 0.1 kg
Package Dimensions 10cm x 10cm x 5cm

3. Installation Instructions

3.1 Preparation (Critical for Strong Adhesion)

Note: Proper surface preparation ensures maximum bonding strength of 3M tape.

  1. Choose a clean, dry, and well-ventilated area (avoid direct sunlight or humid environments).
  2. Clean the target surface with the provided alcohol wipe (or 50-70% isopropyl alcohol solution) to remove dust, grease, and fingerprints.
  3. Allow the surface to air-dry completely (1-2 minutes, no wiping after cleaning).
  4. Ensure the installation temperature is between 15°C-35°C (59°F-95°F). Low temperatures reduce adhesive effectiveness.

3.2 Step-by-Step Installation

  1. Peel off the red protective film from the 3M tape (avoid touching the adhesive surface with bare fingers).
  2. Align the accessory with your desired position.
  3. Press firmly on the entire surface of the accessory for 30 seconds. Apply a minimum pressure of 15 lbs (6.8 kg) to activate the adhesive.
  4. Do not move or remove the accessory within 24 hours. This allows the adhesive to fully cure for permanent bonding.

Important Notice:

Some products may be OEM replacement parts, which require removing the original parts before installation. Please confirm the car model, year, configuration, and chassis code to ensure full compatibility before installation.

Hand holding a carbon fiber trim piece next to a car's air vent, indicating placement.
Image: Demonstrating the placement of the trim piece on the car's air vent.
Underside of a silvery trim piece showing the red protective film on the 3M adhesive tape.
Image: View of the adhesive backing before installation.

4. Functions & Benefits

4.1 Decoration Function

  • Enhances vehicle appearance with a stylish design.
  • Customizes your car to reflect personal taste without permanent modifications.

4.2 Protection Function

  • Shields car surfaces from scratches, scuffs, and minor collisions.
  • Prevents dust accumulation and simplifies cleaning (wipe with a damp cloth).
  • No tools, no drilling, removable without residue.
Carbon fiber pattern trim installed on a car's dashboard air vent.
Image: Carbon fiber trim installed, enhancing the vehicle's interior.
Silvery trim installed on a car's dashboard air vent.
Image: Silvery trim installed, providing a sleek look.

5. Safety Warnings

Warning!

  1. Do not install on airbag deployment areas (e.g., steering wheel, door panels near airbags) as this may interfere with safety systems.
  2. Avoid blocking the driver's view (e.g., front windshield, rearview mirrors) as this violates traffic safety regulations.
  3. Keep away from children under 36 months; small parts may pose choking hazards.
  4. Do not use near open flames or high-temperature sources (adhesive may weaken above 60°C).

6. Maintenance & Care

  1. Clean the accessory with a soft, damp cloth. Avoid abrasive cleaners or solvents.
  2. Check the adhesion monthly; reapply pressure if edges lift (clean the surface first if needed).
  3. For removal: Use 3M adhesive remover or heat the tape gently with a hair dryer (low heat) to soften the bond, then peel off slowly.

7. Troubleshooting

  • Accessory falls off: 1. Recheck surface cleanliness; 2. Ensure installation temperature is adequate; 3. Apply more pressure during installation.
  • Adhesive residue left: Wipe with alcohol or 3M adhesive remover.
  • Misalignment after installation: Remove within 5 minutes (before adhesive cures) and reposition; after 24 hours, follow removal instructions first.

8. User Tips

  • For optimal adhesion, ensure the installation surface is meticulously clean and completely dry. Any residue can compromise the bond.
  • When applying pressure, distribute it evenly across the entire surface of the trim piece for the full 30 seconds to properly activate the adhesive.
  • If installing in colder climates, gently warm the car's interior and the trim piece with a hairdryer before application to improve adhesive performance.
  • Always double-check the fit and alignment before pressing down firmly, as repositioning is only easy within the first few minutes.

9. Warranty & Support

After-Sales Time: Within 15 days after signing for the product (covers manufacturing defects, not improper use).

Contact Us:

  • AliExpress Store Link: Carcartrim Store
  • Customer Service Email: 2978746630@qq.com
  • Service Hours: 9:00 AM - 6:00 PM (GMT+8), Monday to Friday

For the latest version of this manual or additional support, please visit our store.

A PDF version of the user manual is available for download: User manual (PDF)

10. Compliance Information

  • EU Representative: Apex CE Specialists GmbH
  • Representative Address: Grafenberger Allee 277, 40237 Düsseldorf, DE
  • Tel: 49-21312066043
  • E-mail: comInfo@apex-ce.de

Copyright © Carcartrim Store. All rights reserved.

This manual is subject to change without prior notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.